True Temper Dynamic Gold Steel Wood Shafts

True Temper Dynamic Gold Steel Wood Shafts

R200 Flex - 335 tip (46")
In Stock
R300 Flex - 335 tip (46")
In Stock
R400 Flex - 335 tip (46")
In Stock
S200 Flex - 335 tip (46")
S300 Flex - 335 tip (46")
In Stock
S400 Flex - 335 tip (46")
X100 Flex - 335 tip (46")
In Stock
1-3 $19.50
4+ $17.50
Tip & Butt Trimming
Tip Prepping

True Temper Dynamic Gold Steel Wood Shafts

The #1 shaft in golf. The True Temper Dynamic Gold is a high-flex, tour weighted steel wood shaft that is designed for skilled players seeking a low, penetrating ball flight for optimum control and accuracy.

  • A high bend point yielding a more tour preferred ball flight

Trimming Instructions

Not Found.

How do I meassure the tip of the  shaft? Are most drivers now a 335 tip?

Asked by: Jerry
Most drivers today are manufactured with a .335" tip size shaft. You can use this link from our web site to check the driver that you have.
Answered by: JimY
Date published: 2017-04-03

Are these shafts when installed in a bore thru driver head to be trimmed a 0". And if I install them in a standard bore driver head won't I have to trim at least 1" to get a true listed flex?

Asked by: papagolf
If it was me I would trim for the standard bore and trim 0" for the bore through because that is how the shafts were used back in the days when bore through shafts were being manufactured. For the standard bore I would insert the raw shaft (46") into the clubhead an measure the length of the club. If the club measures 47.25" then I would tip trim 1.25" for the driver. If the club measures 47" then I would tip trim 1". With the driver whatever the club measurement is over the raw 46" length would be your tip trim. True Temper changed the trimming instructions but never changed the shaft.
Answered by: JimY
Date published: 2017-02-23

Can you put sensicore in a wood shaft

Asked by: John51
Yes you can install a Sensicore into a Dynamic Gold wood shaft.
Answered by: JimY
Date published: 2017-02-13

What is the weight of the X100 Driver shaft? What other steel Driver shafts are an option? I swing at 125Mph, I want a steel shaft as a project in an old driver head.

Asked by: Benzo
The DG X100 wood shaft weights 125 grams. At this link scroll down the page to the specification box and you can see all the specifications for this shaft.
Answered by: JimY
Date published: 2016-12-05

Hello Again, I couldn't see your staff's answer to my earlier question: what part# do I need to order for a set S300 labels? I'm restoring a set of Wilson Staff Logo '89-'90 Irons I picked up for free. Thx. Sarge

Asked by: Sarge420
We are not allowed to sell just the shaft bands. The shaft manufactures are concerned about the misuse of the shaft labels.
Answered by: JimY
Date published: 2016-11-21

Can you fit this shaft to a Titliest 913D driver?  Also what shaft do you recommend for a 90-95 driver swing speed?

Asked by: Coop
A AjTech Z-42. Made for 90-100mph driver swing. I've been playing them since 1991 as their Test-pilot. They're long too. 
Answered by: Sarge420
Date published: 2017-01-07

I have a adams Speedline Fast10 3 wood would a .335 tip DGx100 fit or do I need the .350 tip size.

Asked by: Bradley
Yes the .335" tip DG X100 wood shaft will fit the Speedline Fast 10 #3 Wood.
Answered by: JimY
Date published: 2016-09-14

Hello. I'd like to put X100's on my 2015 Callaway XR fairway woods. The true temper site recommends tip trimming the 3-wood 0.5" and the 5-wood 1.0". Would this make the clubs too stiff? I'm hoping to have true X-flexes on both. Thank you. 

Asked by: Joe
If you did not tip trim these shafts per True Temper's instructions your X100 would play more flexible then an X100. When you have a shaft that can be used in both drivers and fairway woods this type of tip trimming is normal to maintain the flex of the shafts.
Answered by: JimY
Date published: 2017-05-17
  • y_2017, m_5, d_25, h_5CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_25
  • loc_en_US, sid_UDGW, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks