True Temper Dynamic Gold Tour Issue Iron Shafts

True Temper Dynamic Gold Tour Issue Iron Shafts


Tour Issue Set .355", (3-PW) - S400, 4C1H -
$296.99
In Stock
Tour Issue Set .355", (3-PW) - X100, 5C1H -
$296.99
In Stock
Tour Issue Set .355", (4-PW) - S400, 4C1H -
$258.99
In Stock
Tour Issue Set .355", (4-PW) - X100, 5C1H -
$258.99
In Stock
Tour Issue Ind. #1 iron Shaft - S400, 41.0" -
$36.99
In Stock
Tour Issue Ind. #1 iron Shaft - X100, 41.0" -
$36.99
In Stock
Tour Issue Ind. #2 iron Shaft - S400, 40.5" -
$36.99
In Stock
Tour Issue Ind. #2 iron Shaft - X100, 40.5" -
$36.99
In Stock
Tour Issue Ind. Wedge Shaft - S400, 37.0" -
$36.99
In Stock
Tour Issue Ind. Wedge Shaft - X100, 37.0" -
$36.99
In Stock
Pureing 
1-3 $19.50
4+ $17.50
Tip & Butt Trimming
$4.95
Tip Prepping
$2.95

True Temper Dynamic Gold Tour Issue Iron Shafts

The True Temper Dynamic Gold Tour Issue shafts feature the tightest tolerances of any shaft available in the market. Originally only available to Tour players due to their high demand for accuracy, are now available at The GolfWorks. The Tour Issue shafts are offered in sets only in S400 and X100 flex options and feature shaft weight tolerances of +/- .5 grams.

  • .355" Tapered Tip Only.
  • Available in S400 and X100 Flex Options
  • Two Set Options Available - 3-PW & 4-PW
  • Individual Long Iron and Wedge Shafts Available (41", 40.5" and 37")
  • Other Lengths Available Via Special Order

Trimming Instructions

Not Found.

Where can I get the Dynamic Gold Tour Issue X7's? I can't find them on this site and what MPF are they classified as? I would also like to know any graphite wood shafts that matches the X7's MPF.

Asked by: frankieg54
The Dynamic Gold X7 shafts are sold through True Tempers PFC (Professional Fitting Center) only. We are a PFC location. We would have to special order the shafts for you and we have to install them. We are not allowed to sell you just the shafts. The install price for these shafts is $60.00 each. They would still be a 5C1H code just as the DG X100. It is just a heavier weight shaft.
Answered by: JimY
Date published: 2017-09-11

If I order a set (3-pw) pured do they need to be cut to length before pureing? I've read mixed opinions about the process and the need to cut before pureing (loses the spine if pured before cut). Also, does pureing include frequency matching the set?

Asked by: mikeberlin
Ideally you would Pure the shafts after they are cut for installation. The majority of the time they do not change from the raw shaft test but they could. No, Puring does not include Frequency Matching. DG Tour Issue shafts should set up well for frequency. The hard part with them being taper tips and sold in sets only if you have one that does not match we would not have a replacement.
Answered by: JimY
Date published: 2017-07-07

if I get the club pured will you reshaft the club for me?

Asked by: benbags
Yes we can Pure and reshaft your clubs. For more information you might want to call our Customer Service Department at 1-800-848-8358.
Answered by: JimY
Date published: 2017-05-04

what options do I choose to get shafts prepped with correct lengths sent to me? I'm replacing the shaft in a Calloway UT 18* with x100 and 2 SM5 wedges with S400..

Asked by: Bradley
You would choose the tip and butt trimming box even though these shafts do not require tip trimming. We will cut them to your finished length and sand the shaft tips for you.
Answered by: JimY
Date published: 2017-03-24

What's the difference between DG S300 and S400 shafts?  Thank you.

Asked by: Robert
The DG S400 weights 2 grams heavier (132g) then the S300 (130g) and generally will test 2 cpm's stiffer in a frequency machine. With True Temper shafts there is approximately a 12 cpm difference between an S400 and X100.
Answered by: JimY
Date published: 2017-08-19

I'm buying some irons and the hosel on the irons are .370 will these shafts fit these irons since the tip on the shafts are .355

Asked by: Papa63
You would need to shim the .355" taper tip DG Tour Issue shafts to properly fit the .370" hosel bore of your irons. The SHIMT works well for this. http://www.golfworks.com/the-golfworks-brass-adaptor-shims/p/SHIM/
Answered by: JimY
Date published: 2016-11-28

I need some clarification; the S400 is a stiff shaft and the X100 extra stiff shaft is this correct

Asked by: Papa63
Correct S400 is stiff flex and X100 is an extra stiff flex.
Answered by: JimY
Date published: 2016-11-28

what size tip for titleist tour blades around 1985 box blade

Asked by: garry
These irons use a .355" taper tip shaft size.
Answered by: JimY
Date published: 2016-11-21
  • y_2017, m_9, d_22, h_22CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_24
  • loc_en_US, sid_TT02003PW, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks