True Temper Multi Step Lite Steel Iron Shafts

True Temper Multi Step Lite Steel Iron Shafts


L/A Flex - 370 tip (119g) 1/2D3H
$7.99
In Stock
R/S Flex - 370 tip (125g) 3/4B3H
$7.99
In Stock
Pureing 
1-3 $19.50
4+ $17.50
Tip & Butt Trimming
$4.95
Tip Prepping
$2.95

True Temper Multi Step Lite Steel Iron Shafts

The True Temper Multi Step Lite steel iron shaft was designed with a unique step pattern that promotes a higher launch angle.

Features:
  • .370" tip diameter
  • Extended parallel tip section allows multiple trimming options for a wide variety of golfers

Trimming Instructions

True Temper Multi Step Lite Steel Iron Shaft Specifications

Not Found.

What shaft is comparable to the TT speedstep

Asked by: TLew
The closet replacement we would have in weight and playing characteristics would be the True Temper XP95 (TT0113).
Answered by: JimY
Date published: 2017-05-15

I built a set of irons for my son using xp95 R flex shafts in the fall. The problem is his ball flight is to low would the TT Multi step or Score LT be better?

Asked by: Billy
They are all classified as high trajectory shafts. The Multi-Step and the Score LT are 20 grams heavier, which will affect the feel of the club. The Multi Step has the softest tip section, but the Score LT has the weakest overall flex profile of the three. It would be difficult to say if the trajectory would be noticeably affected, based on comparing the overall profiles. Going to an A flex, one flex softer than the R, might be necessary for the shaft to have a noticeable affect on the trajectory. The Multi - Step would be the only option of the 3 with an A flex option.
Answered by: GW2002
Date published: 2017-04-06

I have AP2 irons wanting to hit higher and longer they are stiff .

Asked by: redrider
The AP2 irons use a .355" taper tip shaft and the Multi-Step shafts are only available in a .370" parallel tip shaft which is to large to fit the Titleist irons. Your AP2 iron hosel bores would have to be reamed or rebored to accept a .370" shaft to be able to use the Multi-Step shafts. Possibly a shaft like the True Temper XP95 (TT0101) which is a .355" taper tip and designed to create a high ball flight could be a good choice.
Answered by: JimY
Date published: 2017-02-14

Can't remember. Been a while since I've reshafted a club. Do your shafts come with the trim instructions?  Also, if I have you trim them, is that price per shaft. 

Asked by: Swampfox
Yes we send trimming instructions with the shafts. If you have use trim the shafts. If we do tip and butt trimming the cost is $4.95 per shaft. If you just want the tip prepped which would include trimming and sanding the tip that is $2.95 per shaft. At this link if you scroll down the page you will see a specification chart for these shafts and you will see the Trim Codes. http://www.golfworks.com/true-temper-multi-step-lite-steel-iron-shafts/p/TT0061/ You will find the trimming instructions at this link. http://www.golfworks.com/images/art/shaft_trim_inst.pdf
Answered by: JimY
Date published: 2017-01-17

WHAT TRUE TEMPER IRON SHAFT REG FLEX WOULD BE GOOD FOR TAYLORMADE 2.0 IRONS OR WHAT GRAPHITE SHAFT WOULD WORK FOR 2.0 IRONS?

Asked by: BOB
You could use any .370" tip diameter shaft, steel or graphite for the Taylor Made 2.0 irons and they could all match well with the irons but if we had some information on what you need the shafts to do for you we could give you some more specific recommendations. You can use or MPF Shaft Fitting Program to help with your choice. http://www.golfworks.com/mpf-shaft-fitting-worksheet/a/496/
Answered by: JimY
Date published: 2016-11-08

I am 63 years of age with a swing speed of 103. I wish to reshaft a set of Wilson Staff D-200 irons with a lighter shaft than the Dynamic Gold S-300 shafts I now have in my irons. What shaft do you recommend for me to purchase.

Asked by: Mike
If you like the performance of the Dynamic Gold, other then the weight, I would recommend the Dynamic Gold SL (TT201105). The True Temper Multi-Step will fit these Wilson irons but are designed to produce a high ball flight. If that fits your needs then the shaft should work fine.
Answered by: JimY
Date published: 2016-09-12

I am a senior with a 71 swing speed. I have Ping I3 older blade clubs. Are these shafts able to be used in my Pings ?

Asked by: Guy
No the Ping I3 blade irons used a .355" taper tip shaft. The Multi-Step shafts are only available in a .370" parallel tips which is to large to fit the Ping I3 blade irons.
Answered by: JimY
Date published: 2016-09-06

I am a club professional and currently play the new Apex Irons by Callaway. I have men's senior shafts. I like the weight of the shaft but have difficulty with the ball going left. Would lightweight steel shafts improve the ball flight??

Asked by: suzieq
If you are currently using a lightweight graphite iron shaft it is possible that a lightweight steel shaft, which would be a little heavier in weight, could straighten out your ball flight. Depending on which model Apex irons you have you may need a .355" taper tip. We do offer the Nippon N.S. Pro 8950GH (NP0005) steel shafts in an A (Senior) flex. http://www.golfworks.com/nippon-pro-ns-pro-8950gh-steel-iron-shafts/p/NP0005/
Answered by: JimY
Date published: 2016-08-22
  • y_2017, m_5, d_19, h_12CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_24
  • loc_en_US, sid_TT0061, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks