True Temper Score LT Steel Iron Shafts

True Temper Score LT Steel Iron Shafts


Score LT - R/S Flex - .370 tip (117g) 3B2H/4B2H
$8.99
In Stock
Pureing 
1-3 $19.50
4+ $17.50
Tip & Butt Trimming
$4.95
Tip Prepping
$2.95

True Temper Score LT Steel Iron Shafts

True Temper Score LT Steel .370 tip R/S Iron Shafts

Features:
  • Lightweight, higher launch design
  • OEM grade steel shaft with unique step design and extended parallel tip section for multiple trim options
  • .370" tip diameter

Trimming Instructions

True Temper Score LT Steel Iron Shaft Specifications

True Temper Score LT Steel Iron Shafts is rated 4.5 out of 5 by 2.
Rated 4 out of 5 by from Perfect Match! I bought these about a month ago to replace a similar shaft with a different flex. These Score LT Steel shafts have performed just as I expected. I notice the desired consistency with every club.
Date published: 2015-11-02
Rated 5 out of 5 by from replaced graphite shafts with these Wanted to try steel shafts in my olderCleveland Irons, that had graphite shafts. Cut and installed between R/S. After playing a few rounds, wish I had had used these years ago. They play great for me a 74 yr. old, a 16 handicap golfer.
Date published: 2017-05-03
  • y_2017, m_5, d_23, h_6
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_2
  • loc_en_US, sid_TT0100, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

Are the labels on these shafts stickers?  I have only seen some pictures on ebay, and they almost look like they are just part of the shaft, not a separate sticker.

Asked by: Jason
The labels for the TT0100 are separate and are installed at assembly.
Answered by: GW2002
Date published: 2017-05-09

how long is the parallel tip on this uncut shaft?

Asked by: ozzie626
On the Score LT the tip to first step measurement is 12" for the uncut shaft.
Answered by: JimY
Date published: 2017-05-04

What would be the shaft weight differential between the PW an 3i for a +3/4" std length and R flex?

Asked by: jtrinid
Difficult to be precise without actually taking a set and cutting to the specs, but based on the fact that the differential in playing lengths, even at the +3/4" length, is still 1/2" between clubs and there would be 3 1/2" more shaft cut for the PW than the #3 iron, the weight differntial would be approximately 10-12 grams. This is based on the weight of the 3 1/2" of shaft cut from the butt end, which is the difference between how much is cut from the #3 and the PW.
Answered by: GW2002
Date published: 2017-04-27

Which .355 taper tip shaft would compare to the performance of TT Score LT .370 ?

Asked by: jtrinid
In True Temper shafts the TT Lite XL (2XLI) or the XP 115 (TT0112) would be the best option to match the TT Score LT. https://www.golfworks.com/true-temper-tt-lite-xl-steel-iron-shafts/p/2XLI/ https://www.golfworks.com/true-temper-xp115-steel-iron-shafts/p/TT0112/
Answered by: JimY
Date published: 2017-04-13

Do you have any knowledge of the balance point of these shafts are?  Meaning, most TT shafts have a little bit lower of a balance point than say Nippon shafts.  The TT XP's make a note of this in description.  Makes normal swingweights (D2) easier to get.

Asked by: Jason
When I have measured the balance point on the Score LT it has been right in the middle of the shaft. It measured 20.5" up from the tip end of the shaft.
Answered by: JimY
Date published: 2017-04-04

In a stiff flex at standard length after trimming, what is the weight(s) of the TT Score LT?  This would be for the Maltby MMB-17 irons.  Thank you.

Asked by: pjc
The Score LT will be the heaviest in the longest iron and gets lighter in weight as each club gets shorter in length. The shaft would weight approximately 107 grams in the 3 iron at 38.75" finished length and would weight approximately 98 grams in the Gap Wedge at 35.5".
Answered by: JimY
Date published: 2017-03-29

How does the TT Score LT shaft compare to the TT XP 115?  Raw weight seems to be about the same, but how about playing characteristics?  Is it more in line with the XP 105?  I play stiff flex in irons, always have.

Asked by: pjc
With the Score LT being a .370" parallel tip it will get cut from both the tip and butt end of the shaft and as the shafts get shorter in length they will get lighter in weight. With the XP115 or 105 even though the shafts are different lengths for each iron the all weight the same. So the 36.5" XP115 shaft weights 114 grams in the R flex and the 40.5" shaft weights 114 grams. We call this a constant weight shaft. So there is a little more difference in shaft weights as the iron lengths get shorter. The Score LT is designed to produce a high trajectory and the XP115 a mid trajectory and the XP105 a mid/high trajectory.
Answered by: JimY
Date published: 2017-03-29

Will these work in callaway razr x irons? if not can you guide me to correct size?

Asked by: donutsngolf
Yes the True Temper Score LT shaft will fit the Callaway Razr X irons.
Answered by: JimY
Date published: 2017-03-27
  • y_2017, m_5, d_19, h_10CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_57
  • loc_en_US, sid_TT0100, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks