True Temper Score LT Steel Iron Shafts

True Temper Score LT Steel Iron Shafts

Score LT - R/S Flex - .370 tip (117g) 3B2H/4B2H
In Stock
1-3 $19.50
4+ $17.50
Tip & Butt Trimming
Tip Prepping

True Temper Score LT Steel Iron Shafts

True Temper Score LT Steel .370 tip R/S Iron Shafts

  • Lightweight, higher launch design
  • OEM grade steel shaft with unique step design and extended parallel tip section for multiple trim options
  • .370" tip diameter

Trimming Instructions

True Temper Score LT Steel Iron Shaft Specifications

True Temper Score LT Steel Iron Shafts is rated 4.0 out of 5 by 1.
Rated 4 out of 5 by from Perfect Match! I bought these about a month ago to replace a similar shaft with a different flex. These Score LT Steel shafts have performed just as I expected. I notice the desired consistency with every club.
Date published: 2015-11-02
  • y_2017, m_3, d_28, h_18
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_US, sid_TT0100, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

Will these work in callaway razr x irons? if not can you guide me to correct size?

Asked by: donutsngolf
Yes the True Temper Score LT shaft will fit the Callaway Razr X irons.
Answered by: JimY
Date published: 2017-03-27

I would like to experiment with single length irons, all same length with these shafts. would R flex still work ok with low kick to keep ball at lower flight pattern. I already hit it high enough but would like to bring flight down a bit

Asked by: johnat408
The TT0100 shaft (True Temper Score shaft) is considered a high trajectory shaft, so even in the single length concept, trimming all the shafts for a single length, assuming the head weights are all the same, it will still be a high trajectory shaft. The Dynamic gold product is one f the lowest trajectory shafts, so it might be worth a try. Or, you could go to an S flex to help lower trajectory, but you might sacrifice some feel, assuming your fitted flex is an R flex.
Answered by: GW2002
Date published: 2017-03-23

do you have this shaft in a 35 inch length?

Asked by: learner70
No but we can cut if for you if you need it at 35". The Score LT shafts need to be trimmed for each iron from the tip and butt end to create the proper flex and length for each iron number they will be used in. We do offer a shaft prep service with all of the shafts we sell.
Answered by: JimY
Date published: 2017-01-05

I made my husband clubs using these irons and Ltech heads. I am in the process of making the hybrids and can not figure out what length to make them. The chart for standard lengths only gives lengths for women. Please advise?

Asked by: Lynn E
With a steel shaft like this we would recommend the following lengths: 3H = 39" 4H = 38.5" 5H = 38"
Answered by: JimY
Date published: 2016-12-05

I purchased this shaft for the Trouble-Out Chipper. Trim Sheet does not show trim instructions for this head. Looking for R Flex Code to use for the Chipper. Your recommendation please.

Asked by: Lou
With the Score LT for an R flex you would follow trim code IR6 and we would tell you to tip trim the shaft for a Wedge which would be 4" tip trimming in this case.
Answered by: JimY
Date published: 2016-12-02

Please explain the shaft stiffness: R/S Is this either regular or stiff, or is it somewhere between regular and stiff? Thank you.

Asked by: Scott
When you see a shaft flex listed as R/S it means that the shaft is a combination flex shaft that can be trimmed to play at either an R flex or an S flex by following the trimming instructions. If we were installing this shaft into a 6 iron and making it an R flex we would cut 2" from the tip end (clubhead end) of the shaft and then cut it to the 6 iron finished length from the butt end (grip end) of the shaft. If we were making it an S flex we would cut 3.5" from the tip end of the shaft and again cut it to the finished length of the 6 iron from the butt end of the shaft.
Answered by: JimY
Date published: 2017-02-15

Do they come in a low kick point?

Asked by: Silky808
Yes the Score LT is a low kick point shaft.
Answered by: JimY
Date published: 2016-11-11

can the true temper score LT shafts be tip trim to a firm flex if so how much do you trim ?

Asked by: john
You would follow trim code IR6 for an R flex and IR11 for an S flex. IR6 for a 6 iron says tip trim 2" for an R flex and 3.5" for an S flex. To make it a firm flex in between and R and S flex you would tip trim the 6 iron 2.75". Just go right in between the amounts for the R and S flex recommendations. Here is the link for the Trim Charts. Scroll down to the second page.
Answered by: JimY
Date published: 2016-11-07
  • y_2017, m_3, d_28, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_50
  • loc_en_US, sid_TT0100, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks