True Temper Straight Taper Steel Putter Shafts

True Temper Straight Taper Steel Putter Shafts

YST - .355" Stepless Straight Taper - 38in
In Stock
TT0004P - .382" ID Flare-Tipped - 38in
In Stock
TT0001P - .370" Stepless Putter - 38in
In Stock
TT1008P - .370" Straight-Tip Stepped - 35in
In Stock
TT1009P - .370" ID Controlled Straight-Tipped Stepless - 38in
In Stock
1-3 $19.50
4+ $17.50
Tip & Butt Trimming
Tip Prepping

True Temper Straight Taper Steel Putter Shafts

  • YST - Stepless .355" straight tapered putter shaft
  • TT0004P - Flared tip .382 ID stepless steel putter shaft for over the post hosels
  • TT0001P - Stepless steel .370" putter shaft
  • TT1008P - Stepped .370" steel putter shaft
  • TT1009P - ID controlled .370" stepless straight taper steel putter shaft

True Temper Straight Taper Steel Putter Shafts is rated 4.8 out of 5 by 6.
Rated 4 out of 5 by from Question on old Scotty Futura Phantom center shaft What shaft would you recommend for a Scotty Cameron Futura Phantom Mallet 2 (center shafted)? Just got done refinishing it, but need a new shaft.
Date published: 2016-10-11
Rated 5 out of 5 by from Great Service and Quick Response Golf Works has most everything in stock and provides the best service for Clubmakers. I will be ordering the majority of things I need frim them.
Date published: 2016-03-02
Rated 5 out of 5 by from Can't go wrong Really good shaft. Straight taper looks sharp. Had it cut by the folks at Golf Works and it was perfect.
Date published: 2016-06-21
Rated 5 out of 5 by from Straight as can be... Looking for straight putts, so I bought a straight customer still curves his putts?
Date published: 2016-10-10
Rated 5 out of 5 by from Great Shaft This shaft replaced the Scotty shaft perfectly, absolutely perfect.
Date published: 2016-04-28
Rated 5 out of 5 by from rebuild Great replacement for original shaft for putter. East to jnstall
Date published: 2016-08-26
  • y_2017, m_10, d_21, h_22
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_6
  • loc_en_US, sid_YST, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

i have an old ping zing putter that needs a shaft witch one should I put on it.

Asked by: mike
For the Ping Zing putter you need the TT0004P Flare Tip putter shaft.
Answered by: JimY
Date published: 2017-10-16

I'm looking for a 35 inch putter shaft for my Scotty Cameron 2016 Newport 2.5 putter. Curious as to what shaft I would need to purchase? Thanks 

Asked by: Charles
The Newport 2.5 uses a Flare Tip TT0004P. It comes as a 37" raw length shaft and gets cut to 35" after it is installed on the putter head.
Answered by: JimY
Date published: 2017-09-26

I have a Scotty Cameron Newport 2 I believe it's from 2014, what shaft do I need to order to replace it?

Asked by: Morry7
The Cameron Newport 2 putter uses the YST .355" tip size putter shaft.
Answered by: JimY
Date published: 2017-09-20

I need a replacement shaft for a Ping Karsten Anser 3 Putter. What would you recommend I purchase?

Asked by: BamaGolf
You would use the YST .355" tip size shaft for the Ping Karsten Anser 3 putter.
Answered by: JimY
Date published: 2017-09-11

Hi! I'm in need of a replacement putter shaft for a Ping Cadence TR Craz-e-r putter. Suggestions? Thanks!

Asked by: Rgb542
We do not have a shaft that will fit the Ping Cadence TR Craz E-R putter. Ping starts with a .340" taper tip double bend shaft and tips it until it fits. You will have to send this putter back to Ping for reshafting.
Answered by: JimY
Date published: 2017-09-05

whats is "ID controlled" when referring to True Temper tapered stepless putter shaft 

Asked by: james2381
The TT1009P ID controlled shaft is designed to be used with over the post design putters. The inside diameter is controlled to match better with these putter designs. This shaft could also be used on non over the post shaft installations.
Answered by: JimY
Date published: 2017-08-28

looking for. orrect shaft for ping anser tr. please help!

Asked by: brad
The Ping Anser TR putter would be the YST .355" tip size shaft.
Answered by: JimY
Date published: 2017-08-24

I need a shaft for a Never Compromise GM2 #6. Its an over the hosel. A flare tiped .382 is to big. And a .370 out of a plumbers neck is too small.

Asked by: Jakie27
Yes. The .370 shaft i pulled from thr plumber was a black Apollo .370 I bought here awhile ago. Are the TT1009P and TT1008P the same tip size?
Answered by: Jackie27
Date published: 2017-08-21
  • y_2017, m_10, d_21, h_22CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_126
  • loc_en_US, sid_YST, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks