True Temper TT Lite XL  Steel Iron Shafts

True Temper TT Lite XL Steel Iron Shafts


R 40.0 (#1) - .355 tip (113g) 3B2M
$10.99
In Stock
R 39.5 (#2) - .355 tip (113g) 3B2M
$10.99
In Stock
R 39.0 (#3) - .355 tip (113g) 3B2M
$10.99
In Stock
R 38.5 (#4) - .355 tip (113g) 3B2M
$10.99
In Stock
R 38.0 (#5) - .355 tip (113g) 3B2M
$10.99
In Stock
R 37.5 (#6) - .355 tip (113g) 3B2M
$10.99
In Stock
R 37.0 (#7) - .355 tip (113g) 3B2M
$10.99
In Stock
R 36.5 (#8) - .355 tip (113g) 3B2M
$10.99
In Stock
R 36.0 (#9,PW,SW,LW) - .355 tip (113g) 3B2M
$10.99
In Stock
S 40.0 (#1) - .355 tip (118g) 4B2M
$10.99
In Stock
S 39.5 (#2) - .355 tip (118g) 4B2M
$10.99
In Stock
S 39.0 (#3) - .355 tip (118g) 4B2M
$10.99
In Stock
S 38.5 (#4) - .355 tip (118g) 4B2M
$10.99
In Stock
S 38.0 (#5) - .355 tip (118g) 4B2M
$10.99
In Stock
S 37.5 (#6) - .355 tip (118g) 4B2M
$10.99
In Stock
S 37.0 (#7) - .355 tip (118g) 4B2M
$10.99
In Stock
S 36.5 (#8) - .355 tip (118g) 4B2M
$10.99
In Stock
S 36.0 (#9,PW,SW,LW) - .355 tip (118g) 4B2M
$10.99
In Stock
Pureing 
1-3 $19.50
4+ $17.50
Tip & Butt Trimming
$4.95
Tip Prepping
$2.95
OR

Buy The Complete Set

Product Name
Price
Qty
R TT Lite XL #3-PW .355 Tapered Set
$87.92
S TT Lite XL #3-PW .355 Tapered Set
$87.92

True Temper TT Lite XL Steel Iron Shafts

The True Temper TT Lite XL steel iron shaft is a great choice for any bore-through iron head.

Features:
  • The mid-flex, longer length design can be built substantially longer than "standard length" without requiring a butt extension

Trimming Instructions

True Temper TT Lite XL Steel Iron Shafts is rated 4.8 out of 5 by 5.
Rated 5 out of 5 by from Excellent for Ping re-shaft I have reshafted 2 sets of Ping irons with the TT lite xl tapered tip shafts. Playability is excellent and the price is outstanding. If price were no issue, I'd have tried the new XP series iron shafts, but these work well enough. Ball trajectory is mid flight and distance is repeatable and reliable. There is no excess spin in the wedges and there is no trouble getting the proper long iron trajectory. There is no extra yardage built into these shafts, but in my most recent build, I soft stepped the Ping ISIs by one shaft. Trajectory is a bit better and the ball comes off the club softer and with excellent control. The ISIs with the original JZ stiff cushion shaft were just too unpleasant and too much work. They now play great.
Date published: 2014-09-03
Rated 5 out of 5 by from Tried and Trusted shaft I guess a shaft which has been around 30(?) years must have something going for it. I used these 20 yrs ago with some success. Recently I experimented with PXi 5.5 in my irons but couldn't get any consistency with them. I pulled these and replaced them with TT Lite Reg and I just love them. Ball launches medium traj but doesn't balloon and I hit them just as far as the Pxi which cost 4 times as much. Sounds trite but forget brands and try to find the shaft that suits you. (For reference, I am 62 and swing speed is around 83mph with a 6-iron. I have a mid release. My index floats between 1.0 and 2.0 and I have had to concede that I can no longer use stiff flex. TT Lite Reg is about med-stiff anyway.
Date published: 2015-12-10
Rated 5 out of 5 by from Smooth as Silk New shafts for Wilson Staff 4- PW. Customer service helped with the selection for a slightly softer shaft with higher ball flight. Performance is excellent with nice kick at club delivery.
Date published: 2017-10-26
Rated 4 out of 5 by from Feels Good Bought about a month ago. Put it in a pitching wedge and it seems to be great.
Date published: 2016-01-25
Rated 5 out of 5 by from Th life steel iron shafts Used for two wedges I found and love the feel of both..
Date published: 2017-05-17
  • y_2017, m_11, d_15, h_22
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_5
  • loc_en_US, sid_2XLI, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

I have ping g15 irons with awt r flex shafts. I need a shaft that is stiffer and has a lower ball flight. Would this shaft in r flex be a good choice.

Asked by: Jonnyb9
The TT Lite XL should work well. It will play stiffer then the AWT which will lower the ball flight.
Answered by: JimY
Date published: 2017-11-13

I am a senior 87 years old. Which steel shaft would you recommend?

Asked by: Benny
I would recommend the FST 90 (FS0011). This shaft cut to the A flex could work better then the TT Lite XL. It is a lighter weight steel shaft and the A flex is more flexible. The lightest weight steel shaft is the Nippon N.S. Pro Zelos 7 (NP0013 or NP0014). Depending on which irons you have you may need either the .355" tip size or the .370" tip size shafts. https://www.golfworks.com/fst-90-steel-iron-shafts/p/FS0011/ https://www.golfworks.com/nippon-zelos-7-steel-shaft/p/NP0013/ https://www.golfworks.com/nippon-zelos-7-355-taper-tip-iron-shafts/p/NP0014/
Answered by: JimY
Date published: 2017-11-06

I have a set of Taylor Made R11 irons with the KBS Tour 90 Steel stiff shafts that I play all the time. How would these TT Lite XL steel shafts (in a stiff) compare from a stiffness as well as a kick point perspective? Thanks!

Asked by: ChrisP
The TT Lite XL irons shafts will be heavier in weight and will play stiffer in an S flex then the KBS Tour 90 S flex shafts. Because they play stiffer they will also produce a little lower ball flight. TT Lite XL iron shafts have always played stiffer then their listed flex. The KBS Tour 90 shafts test and play a little more flexible then normal.
Answered by: JimY
Date published: 2017-08-14

I would like to re-shaft a set of Mizuno MX25 . Do you guys happen to have a catalog that has the correct tip size for these Irons. Any answer is much appreciated.

Asked by: Martins
The Mizuno MX-25 irons use a .355" taper tip iron shaft. The TT Lite XL (2XLI) shafts will fit the MX-25 irons.
Answered by: JimY
Date published: 2017-07-31

Are these suitable for calaway X-18 through-bore irons?

Asked by: Ravi
The UTXLIC is a better choice for the X-18 bore through because of their longer raw length. True Temper actually lengthened this shaft so that it could be used in bore through irons. Callaway used .370" parallel tip shafts and cuts slots lengthwise in the tip of the shaft to compress the tip down to a .350" size for the bore through. https://www.golfworks.com/true-temper-tt-lite-xl-parallel-iron-shafts/p/UTXLIC/
Answered by: JimY
Date published: 2017-07-31

I hit my 7 iron 150. I have a set of Tommy Armor 855's and want to reshaft them with r flex steel. Do you recommend this shaft or another shaft? My budget is approx $100 for 3-pw.

Asked by: Bill 162
I was thinking about putting TT Lite XL shafts in my current set of irons, but before pulling the trigger, I decided to put them in my backup set of clubs, an old set of Tommy Armour 845's that I've had for 20+ years. I hit those 845's so well with the new TT Lite XL shafts, they went straight into my bag and my primary set of irons are currently collecting dust in a dark corner in the basement! Soooo... heck YEAH I recommend this shaft!!
Answered by: jbgolfer
Date published: 2017-07-26

Are the TT shafts compatible for Mizzuno MP57 irons? My iron swing speed is 78-80. I know a regular shaft is needed, what gram weight shaft would be best for a higher ball flight? I am a 4 hdncp. 61 yrs old, 5' 7. Thank you!!

Asked by: bob
Yes the 2XLI TT Lite XL .355" taper tip shafts will fit the Mizuno MP 57 irons. If you currently have a standard weight shaft these lighter weight shaft could help you to hit the ball a little higher.
Answered by: JimY
Date published: 2017-07-20

I would like to re-shaft a set of Orlimar SF302 irons from Graphite to steel with these. Do you guys happen to have a catalog that has the correct tip size for these Irons. Any answer is much appreciated.

Asked by: BKH
The Orlimar SF302 irons are a .370" hosel bore size and use a .370" tip size shaft.
Answered by: JimY
Date published: 2017-06-26
  • y_2017, m_11, d_15, h_22CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_56
  • loc_en_US, sid_2XLI, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks