True Temper TT Lite XL  Steel Iron Shafts

True Temper TT Lite XL Steel Iron Shafts


R 40.0 (#1) - .355 tip (113g) 3B2M
$10.99
In Stock
R 39.5 (#2) - .355 tip (113g) 3B2M
$10.99
In Stock
R 39.0 (#3) - .355 tip (113g) 3B2M
$10.99
In Stock
R 38.5 (#4) - .355 tip (113g) 3B2M
$10.99
In Stock
R 38.0 (#5) - .355 tip (113g) 3B2M
$10.99
In Stock
R 37.5 (#6) - .355 tip (113g) 3B2M
$10.99
In Stock
R 37.0 (#7) - .355 tip (113g) 3B2M
$10.99
In Stock
R 36.5 (#8) - .355 tip (113g) 3B2M
$10.99
In Stock
R 36.0 (#9,PW,SW,LW) - .355 tip (113g) 3B2M
$10.99
In Stock
S 40.0 (#1) - .355 tip (118g) 4B2M
$10.99
In Stock
S 39.5 (#2) - .355 tip (118g) 4B2M
$10.99
In Stock
S 39.0 (#3) - .355 tip (118g) 4B2M
$10.99
In Stock
S 38.5 (#4) - .355 tip (118g) 4B2M
$10.99
In Stock
S 38.0 (#5) - .355 tip (118g) 4B2M
$10.99
In Stock
S 37.5 (#6) - .355 tip (118g) 4B2M
$10.99
In Stock
S 37.0 (#7) - .355 tip (118g) 4B2M
$10.99
In Stock
S 36.5 (#8) - .355 tip (118g) 4B2M
$10.99
In Stock
S 36.0 (#9,PW,SW,LW) - .355 tip (118g) 4B2M
$10.99
In Stock
Pureing 
1-3 $19.50
4+ $17.50
Tip & Butt Trimming
$4.95
Tip Prepping
$2.95
OR

Buy The Complete Set

Product Name
Price
Qty
R TT Lite XL #3-PW .355 Tapered Set
$87.92
S TT Lite XL #3-PW .355 Tapered Set
$87.92

True Temper TT Lite XL Steel Iron Shafts

The True Temper TT Lite XL steel iron shaft is a great choice for any bore-through iron head.

Features:
  • The mid-flex, longer length design can be built substantially longer than "standard length" without requiring a butt extension

Trimming Instructions

True Temper TT Lite XL Steel Iron Shafts is rated 4.7 out of 5 by 3.
Rated 5 out of 5 by from Excellent for Ping re-shaft I have reshafted 2 sets of Ping irons with the TT lite xl tapered tip shafts. Playability is excellent and the price is outstanding. If price were no issue, I'd have tried the new XP series iron shafts, but these work well enough. Ball trajectory is mid flight and distance is repeatable and reliable. There is no excess spin in the wedges and there is no trouble getting the proper long iron trajectory. There is no extra yardage built into these shafts, but in my most recent build, I soft stepped the Ping ISIs by one shaft. Trajectory is a bit better and the ball comes off the club softer and with excellent control. The ISIs with the original JZ stiff cushion shaft were just too unpleasant and too much work. They now play great.
Date published: 2014-09-03
Rated 5 out of 5 by from Tried and Trusted shaft I guess a shaft which has been around 30(?) years must have something going for it. I used these 20 yrs ago with some success. Recently I experimented with PXi 5.5 in my irons but couldn't get any consistency with them. I pulled these and replaced them with TT Lite Reg and I just love them. Ball launches medium traj but doesn't balloon and I hit them just as far as the Pxi which cost 4 times as much. Sounds trite but forget brands and try to find the shaft that suits you. (For reference, I am 62 and swing speed is around 83mph with a 6-iron. I have a mid release. My index floats between 1.0 and 2.0 and I have had to concede that I can no longer use stiff flex. TT Lite Reg is about med-stiff anyway.
Date published: 2015-12-10
Rated 4 out of 5 by from Feels Good Bought about a month ago. Put it in a pitching wedge and it seems to be great.
Date published: 2016-01-25
  • y_2017, m_2, d_20, h_7
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_3
  • loc_en_US, sid_2XLI, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

I have a set of ping G15 irons (10 clubs 4 thru PW, SW, GW and LW) I want to give these to my son in law but he needs clubs that are plus 1 1/2" over standard.  How should I order the shafts?

Asked by: Dick
I would start with the using the 3 iron shaft into the 4 iron. The raw length shaft for the 3 iron is 39" and when installed into the 4 iron the finished length should be in the 40" range. A standard length Ping G15 4 iron is 38.25" plus 1.5" takes you to 39.75" so you will still butt cut approximately .25" to get to your finished length. TT Lite XL iron shafts play stiffer then normal so this should still work out pretty well stiffness wise.
Answered by: JimY
Date published: 2017-02-01

Both the stiff or regular flex would just butt cut to length? Tip is already stiff or reg? What is the actual length of the 38.5. Thanks. TT Lite XL .355 tapered tip.

Asked by: slmealor
Yes the shafts are already stiff or regular. You would just install the shafts and butt cut to your finished length. The 38.5" raw length shaft measures 38.5" long and is the shaft for the 4 iron.
Answered by: JimY
Date published: 2017-01-30

I NEED A STEEL SHAFT FOR A 15 DEGREE FAIRWAY WOOD F-35 I AM A SENIOR 68YR. NEED SENIOR FLEX

Asked by: CLAUDIO
The only steel wood shafts we have these days are Dynamic Gold (UDGW) and True Temper Command (TT202101). Neither one of them is made in a Senior flex. If you used an R flex and did not tip trim at all just butt cut to length it would keep you closer to a senior flex.
Answered by: JimY
Date published: 2017-01-23

I have 3 pre wedges , 1 with step shaft 2 with stepless , the feel is totally different,  can u tell me what stepped shaft they use , thank you , shane

Asked by: Sfrey
On the Pinemeadow Golf web site they show that they offer 3 different shafts for this wedge. Apollo Lite, TT Lite XL and Dynamic Gold. All 3 of these shafts have steps. If it is a TT Lite XL the steps will measure 1.5" and if it is a Dynamic Gold the steps will measure 1 7/8". I do not have the step measurements for the Apollo Lite shaft.
Answered by: JimY
Date published: 2017-01-23

I have a set of Ping i3 irons, 2 thru sw. I understand that all Ping irons have a 355 taper bore...is that correct? I would like to reshaft with a TT Lite XL R-flex shaft. Can I buy a set of 3-pw shafts, and then add the 2-iron and sw shafts?

Asked by: beegeeping 1565
Yes you can order them as a set and then order the 2 iron and SW shafts individually.
Answered by: JimY
Date published: 2017-01-18

Is there a link for your shaft test results or shaft MPF's?

Asked by: Ace
We do not publish or list our shaft profile data. At this link scroll down to the bottom of the page and you can click on Woods, Irons, Hybrids, or Wedges and it will bring up the shafts by their MPF codes. The shafts shaded in green are new shafts added for 2017. http://www.golfworks.com/choosing-the-best-shaft-for-your-game/a/1650/
Answered by: JimY
Date published: 2017-01-16

Just curious because I'm a golf nut - what testing are your referring to when you say the DG S300 is similar to this in R? BTW, I appreciate your great customer service and am probably going to buy my first product from you in the coming days!!

Asked by: Ace
We do our own shaft profile testing where we test the shaft for stiffness at 4 different points of the shafts.
Answered by: JimY
Date published: 2017-01-13

Then, would a Regular flex in this shaft closer equate to a Dynamic Gold S300? Or would this shaft in Stiff "feel" more like a S300 because it weighs less?

Asked by: Ace
The R flex tests very close to the DG S300. Some players find they can play a stiffer shaft or maintain a shaft flex they have played if they go to a lighter weight shaft. Personally I would get one shaft and try it before deciding whether or not to do the whole set.
Answered by: JimY
Date published: 2017-01-13
  • y_2017, m_2, d_20, h_10CST
  • bvseo_bulk, prod_bvqa, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_35
  • loc_en_US, sid_2XLI, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks