True Temper XP105 .355" Steel Iron Shafts

True Temper XP105 .355" Steel Iron Shafts


R3 40.5 (#2) - .355 tip (100g) 3B3H
$26.99
In Stock
R3 40.0 (#3) - .355 tip (100g) 3B3H
$26.99
In Stock
R3 39.5 (#4) - .355 tip (100g) 3B3H
$26.99
In Stock
R3 39.0 (#5) - .355 tip (100g) 3B3H
$26.99
In Stock
R3 38.5 (#6) - .355 tip (100g) 3B3H
$26.99
In Stock
R3 38.0 (#7) - .355 tip (100g) 3B3H
$26.99
In Stock
R3 37.5 (#8) - .355 tip (100g) 3B3H
$26.99
In Stock
R3 37.0 (#9) - .355 tip (100g) 3B3H
$26.99
In Stock
R3 36.5 (PW,SW,LW) - .355 tip (100g) 3B3H
$26.99
In Stock
S3 40.5 (#2) - .355 tip (101g) 4B3H
$26.99
In Stock
S3 40.0 (#3) - .355 tip (101g) 4B3H
$26.99
In Stock
S3 39.5 (#4) - .355 tip (101g) 4B3H
$26.99
In Stock
S3 39.0 (#5) - .355 tip (101g) 4B3H
$26.99
In Stock
S3 38.5 (#6) - .355 tip (101g) 4B3H
$26.99
In Stock
S3 38.0 (#7) - .355 tip (101g) 4B3H
$26.99
In Stock
S3 37.5 (#8) - .355 tip (101g) 4B3H
$26.99
In Stock
S3 37.0 (#9) - .355 tip (101g) 4B3H
$26.99
In Stock
S3 36.5 (PW,SW,LW) - .355 tip (101g) 4B3H
$26.99
In Stock
Pureing 
1-3 $19.50
4+ $17.50
Tip & Butt Trimming
$4.95
Tip Prepping
$2.95

True Temper XP105 .355" Steel Iron Shafts

The new XP Series brings your game inside the ropes by delivering explosive power and distance to every iron in the bag. Robot and player testing has shown an average of 6-8 yards improvement in carry distance with many players seeing double-digit yardage gains. Featuring optimized trajectory in a superlight weight design, the XP shafts are engineered to be the longest and most forgiving steel iron shafts in the game today.

Features:
  • XP105 has an additional 10 grams of weight compared to the XP95, making it a great option for slightly faster tempo swings.
  • Combines standard and speed steps to ensure the ultimate combination of maximum ball speed and dispersion control.

Trimming Instructions

XP Spec sheet

Not Found.

Just got fitted for steelhead xr pro irons with Xp s105 shafts. Was looking at md3 or pm wedges from callaway to finish my set makeup. Noticed that they come standard with 125-130 gram weight shafts. Should I order custom Xp s105 to match set?

Asked by: Jim g
Heavier shafts are standard in most manufactures wedges. A lot of players like the heavier weight shafts for the touch and feel shots around the greens. It helps them time and pace their swing on these shorter shots. You certainly could special order these wedges to have the same XP105 shafts. Did you have the same weight shafts in your previous wedges that you had in your irons? If the wedge shafts were different and heavier I would look at how those worked and felt to you to help make this decision.
Answered by: JimY
Date published: 2017-05-15

currently using dynamic gold s300 but they are a bit too heavy ..friend recommended speedstep 80 gr reg flex but I cant buy them anywhere... So looking at xp 95` 370 or the 105 reg... thoughts?

Asked by: golfin nut
The True Temper Speedstep 80 is made exclusively for Callaway and is not available aftermarket. The XP 95 would be the closest shaft we have. It depends on which model and make of irons you have as to whether you need the TT0101 .355" taper tip or the TT0113 .370" parallel tip shafts.
Answered by: JimY
Date published: 2017-04-13

I've narrowed my new iron shaft selection down to an XP 95 R and an XP 105 R. They perform very similar on the launch monitor. Would you recommend one over the other? What are the advantages and disadvantages of each shaft?

Asked by: Randy
Shaft weight is the biggest difference in these two shafts. If you have a smooth tempo the 95 should be just fine and as I like to say will help keep you as good playing the 18th hole as you were on the first hole compared to the heavier shaft. Unless that is not an issue. I was always taught that the club should be just heavy enough to help me maintain pace and timing of my swing. If it gets to light you have to control the pace and timing by yourself, which we can do on our good days but on the bad days it will be much harder to control. Golf is a game of misses and which one is going to make your missed shots more playable?
Answered by: JimY
Date published: 2017-02-13

If these TT XP 105 shafts(S3) were used to replace the TT Dyn. Gold S300 in my irons that are swing weighted at D2.5, what would the new swing weight be and could I achieve a desired SW of D0 with a weight kit and if so which kit would I order? Grip=48g.

Asked by: Smitty
The swingweight might drop 1 to 1.5 swingweights. Generally a 9 gram change of shaft weight will change a club 1 swingweight assuming the balance points of the shafts are the same, and these are very close. Which irons are you referring to?
Answered by: JimY
Date published: 2017-01-30

Hi, I currently have a TM MC irons with Dynamic Gold XP R300 Shafts, these shafts are not produced anymore. Im looking to build a new set with Titleist AP2 irons, wondering which XP (95, 105, 115) would be the closest to the one´s I currently have. Thank 

Asked by: Ideophonic
The Dynamic Gold XP R300 was listed as a 110 gram weight shaft and designed to create a mid ball flight. The XP115 R300 is listed at 114 grams and a mid ball flight. It should come the closest to the DG XP.
Answered by: JimY
Date published: 2017-01-30

Just purchased a set of xp105 shafts . Should they be trimmed at the tipped end to customize length or should they be trimmed at the butt end to set length ?

Asked by: Bob68
XP105 shafts are a butt cut only shaft. You do not tip trim it at all.
Answered by: JimY
Date published: 2017-01-06

I see the XP105 has no 0.370 para tip version. The R300 version of this shaft has the features I want. What other shaft would be closest fit to this? (I am 63, 1.5 index and carry 7 iron 155y. Now using DGSL S300, soft-stepped but feels too firm now).

Asked by: Johnno
As was mentioned in the other answer you can shim the XP 105 shafts to fit the .370" hosel bore. We have our SHIMT which works well for this assembly. http://www.golfworks.com/the-golfworks-brass-adaptor-shims/p/SHIM/ Another shaft option in a 105 weight range could be the KBS Tour 105 (FS0045) which is a .370" tip size shaft. These shafts have similar playing characteristics as the XP 105 shafts. http://www.golfworks.com/kbs-tour-105-steel-iron-shafts/p/FS0045/
Answered by: JimY
Date published: 2017-01-04

I have a set of Ping G10 AWT Regular Flex Irons. I'm looking for replacement shafts in a senior flex and would like to add +.5" above standard in length. Any suggestions?

Asked by: Moose54
True Temper does not make the XP 105 or any of the XP Series shafts in a senior flex. For the Ping G10 irons you also need a .355" taper tip shaft. The only steel .355" taper tip senior flex shafts that we have are the Nippon N.S. Pro 8950GH (NP0005) and the N.S. Pro Zelos 7 (NP0014). In graphite shafts we have the Aerotech SteelFiber 70CW (AT0020IE) and the Paderson Kinetixx TS-I Trajectory (Pk0105). These 4 shafts are the only .355" taper tip senior flex shafts that we have. They all could work in the Ping G30 irons.
Answered by: JimY
Date published: 2016-12-30
  • y_2017, m_5, d_25, h_10CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_19
  • loc_en_US, sid_TT0102, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks