True Temper XP105 .355" Steel Iron Shafts

True Temper XP105 .355" Steel Iron Shafts


R3 40.5 (#2) - .355 tip (100g) 3B3H
$26.99
In Stock
R3 40.0 (#3) - .355 tip (100g) 3B3H
$26.99
In Stock
R3 39.5 (#4) - .355 tip (100g) 3B3H
$26.99
In Stock
R3 39.0 (#5) - .355 tip (100g) 3B3H
$26.99
In Stock
R3 38.5 (#6) - .355 tip (100g) 3B3H
$26.99
In Stock
R3 38.0 (#7) - .355 tip (100g) 3B3H
$26.99
In Stock
R3 37.5 (#8) - .355 tip (100g) 3B3H
$26.99
In Stock
R3 37.0 (#9) - .355 tip (100g) 3B3H
$26.99
In Stock
R3 36.5 (PW,SW,LW) - .355 tip (100g) 3B3H
$26.99
In Stock
S3 40.5 (#2) - .355 tip (101g) 4B3H
$26.99
In Stock
S3 40.0 (#3) - .355 tip (101g) 4B3H
$26.99
In Stock
S3 39.5 (#4) - .355 tip (101g) 4B3H
$26.99
In Stock
S3 39.0 (#5) - .355 tip (101g) 4B3H
$26.99
In Stock
S3 38.5 (#6) - .355 tip (101g) 4B3H
$26.99
In Stock
S3 38.0 (#7) - .355 tip (101g) 4B3H
$26.99
In Stock
S3 37.5 (#8) - .355 tip (101g) 4B3H
$26.99
In Stock
S3 37.0 (#9) - .355 tip (101g) 4B3H
$26.99
In Stock
S3 36.5 (PW,SW,LW) - .355 tip (101g) 4B3H
$26.99
In Stock
Pureing 
1-3 $19.50
4+ $17.50
Tip & Butt Trimming
$4.95
Tip Prepping
$2.95

True Temper XP105 .355" Steel Iron Shafts

The new XP Series brings your game inside the ropes by delivering explosive power and distance to every iron in the bag. Robot and player testing has shown an average of 6-8 yards improvement in carry distance with many players seeing double-digit yardage gains. Featuring optimized trajectory in a superlight weight design, the XP shafts are engineered to be the longest and most forgiving steel iron shafts in the game today.

Features:
  • XP105 has an additional 10 grams of weight compared to the XP95, making it a great option for slightly faster tempo swings.
  • Combines standard and speed steps to ensure the ultimate combination of maximum ball speed and dispersion control.

Trimming Instructions

XP Spec sheet

True Temper Dynamic Gold XP105 Steel Iron Shafts is rated 5.0 out of 5 by 3.
Rated 5 out of 5 by from XP 105 I have a set of Titleist 695 irons that had DG S300 shafts in them. They were too heavy @56 years old. So I ordered the XP 105 S300 shafts to replace them with. I am very pleased with the higher ball flight and the roll out after hitting the ground. The soft feel off the club face now pleases the elbows and lower back. The are a little pricy, but are well worth it.
Date published: 2015-10-26
Rated 5 out of 5 by from Excellent Shaft Just installed this shaft in my sand wedge and was able to control my direction much better than the one I replaced
Date published: 2017-09-22
Rated 5 out of 5 by from Great shaft Gives a great ball flight and reduces weight, but still maintains control.
Date published: 2017-10-16
  • y_2017, m_11, d_22, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_3
  • loc_en_US, sid_TT0102, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

Does it feel any different if I mix xp 115 on the scoring clubs and xp105 in the mid irons?

Asked by: Cris117
The 105's are a little lighter and could hit the ball a little higher. Mixing shafts like this within a set can work well for some players by making it easier to hit the mid and longer irons. It is one of those things you will not know for sure until you try it. You might want to try one shaft first before deciding to change them all.
Answered by: JimY
Date published: 2017-10-16

Mizuno MP 54 - .355 or .370? Vokey Wedges, same question. I want to replace my current shafts with these. Also do they make this shaft for a hybrid, Titleist 816H1 have *21 and *23 degree. Would not the adjustable tip for the hybrids.

Asked by: Jeff
MP-54 irons and Vokey Wedges are .355". No True Temper does not make an XP105 hybrid shaft. The Titleist 816H Hybrids use a .370" tip size shaft. You could use these iron shafts in the hybrids but you would have to shim the shafts to fit properly.
Answered by: JimY
Date published: 2017-09-18

Does Maltby have a comparable shaft to the TT105 ?

Asked by: Jeffrey
We have the True Temper XP105 if that is the TT105 shaft you are referring to. That is currently the only True Temper 105 shaft that we have.
Answered by: JimY
Date published: 2017-08-28

are the xp105 .355 taper tip that will fit my ap2

Asked by: jimbo
Yes the XP105 .355" taper tip shafts will fit the Titleist AP2 irons.
Answered by: JimY
Date published: 2017-07-31

I am thinking about changing shafts from Rifle 5.5's to the XP 105' R300 for my irons.  PXG 0311 heads.  Your thoughts.  

Asked by: BIG Mike
The Project X Rifle 5.5 weights 115 grams and is designed for a low trajectory. The XP 105 R300 weights 100 grams and is designed for a mid/high trajectory. The XP 105 R300 tests a lot more flexible then the Rifle 5.5. Even the XP 105 S300 tests more flexible then the PX Rifle 5.5.
Answered by: JimY
Date published: 2017-09-22

I am thinking about putting these in my Apex irons. I am 1/2 inch over standard. Is there room to trim?

Asked by: ccphotog
Yes the raw length of each shaft is plenty long enough to add 1/2" with the Apex irons.
Answered by: JimY
Date published: 2017-06-30

 I recently was fitted for AP2-716's with R-300, XP90's I'm actually 1- 1-1/2 clubs shorter with these shafts , also the ball doesn't hold its flight pattern Most of the time I end up on the far left of the green . Im considering XP105's or XP115's S300 ?

Asked by: Boomer
If the missed shots are going mostly left it could indicate that the shafts are to light and you could be pulling shots. A heavier shaft could help correct that problem. It would be interesting to know what irons, brand, model, shafts and shaft flex you were playing in your previous set. There could also be a difference in the lofts of the previous irons and the AP2 716 irons that is causing some of the distance difference. I would certainly consider using the same shaft model that was in the previous irons. As for shaft flex we reference an R flex for a 7 iron from 150 yards and an S flex for an 8 iron from 150 yards. As to whether the XP 105 or 115 would be better I would reference the weight to the weight of the previous iron shafts.
Answered by: JimY
Date published: 2017-07-01

I was fit to add 2 inches to the shaft length. For the XP105s should I put #2 shaft into #4 club head and work my way down? 

Asked by: Rikki
Thanks JimY. My current shafts are R flex. So if I go Sflex I'll probably be ok. 
Answered by: Rikki
Date published: 2017-06-28
  • y_2017, m_11, d_24, h_2CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_28
  • loc_en_US, sid_TT0102, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks