True Temper XP95 .355" Steel Iron Shafts

True Temper XP95 .355" Steel Iron Shafts


R300, 40.0 (#3 Iron) - .355 tip (93g) 3B3H
$26.99
In Stock
R300, 39.5 (#4 Iron) - .355 tip (93g) 3B3H
$26.99
In Stock
R300, 39.0 (#5 Iron) - .355 tip (93g) 3B3H
$26.99
In Stock
R300, 38.5 (#6 Iron) - .355 tip (93g) 3B3H
$26.99
In Stock
R300, 38.0 (#7 Iron) - .355 tip (93g) 3B3H
$26.99
In Stock
R300, 37.5 (#8 Iron) - .355 tip (93g) 3B3H
$26.99
In Stock
R300, 37.0 (#9 Iron) - .355 tip (93g) 3B3H
$26.99
In Stock
R300, 36.5 (Wedge) - .355 tip (93g) 3B3H
$26.99
In Stock
S300, 40.0 (#3 Iron) - .355 tip (95g) 4B3H
$26.99
In Stock
S300, 39.5 (#4 Iron) - .355 tip (95g) 4B3H
$26.99
In Stock
S300, 39.0 (#5 Iron) - .355 tip (95g) 4B3H
$26.99
In Stock
S300, 38.5 (#6 Iron) - .355 tip (95g) 4B3H
$26.99
In Stock
S300, 38.0 (#7 Iron) - .355 tip (95g) 4B3H
$26.99
In Stock
S300, 37.5 (#8 iIron) - .355 tip (95g) 4B3H
$26.99
In Stock
S300, 37.0 (#9 Iron) - .355 tip (95g) 4B3H
$26.99
In Stock
S300, 36.5 (Wedge) - .355 tip (95g) 4B3H
$26.99
In Stock
Pureing 
1-3 $19.50
4+ $17.50
Tip & Butt Trimming
$4.95
Tip Prepping
$2.95

True Temper XP95 .355" Steel Iron Shafts

The new XP Series brings your game inside the ropes by delivering explosive power and distance to every iron in the bag. Robot and player testing has shown an average of 6-8 yards improvement in carry distance with many players seeing double-digit yardage gains. Featuring optimized trajectory in a superlight weight design, the XP shafts are engineered to be the longest and most forgiving steel iron shafts in the game today.

Features:
  • XP95 is an Ultralight shaft (95g) designed to deliver maximum peak trajectory for explosive distance
  • Combines standard and speed steps to ensure the ultimate combination of maximum ball speed and dispersion control.

Trimming Instructions

XP Spec sheet

True Temper Dynamic Gold XP95 Steel Iron Shafts is rated 4.8 out of 5 by 17.
Rated 5 out of 5 by from good feel I received these 2 weeks and resifted AP1 irons. much lighter with good feel at impact. Did not balloon but was a nice high trajectory.
Date published: 2015-08-24
Rated 5 out of 5 by from Great shafts! I bought these a month ago. I previously had the XP 105 in my clubs. I think these XP 95 are a little lighter.....my swing weight for each club went down 1 to 2 swing weights so I am able to swing the club a little quicker and more consistently now. Also the XP 95 has a little higher ball flight which is what I was looking for....easy to order and put together. Very happy.
Date published: 2016-01-30
Rated 5 out of 5 by from Higher flight I've played them for a month in my 5 iron - PW, and couldn't be happier. My swing speed with driver is around 85 mph, and I was looking for more height and distance with the irons. These shafts have performed as advertised.
Date published: 2015-05-12
Rated 3 out of 5 by from Overstated Claims of Distance Gains I have now used the XP95 and the XP90 is several sets of irons. The shafts have a soft feel but launch the ball well. I did not see any increase in distance over other iron shafts. In fact, I'm currently using AMT True Temper shafts in my MB-T irons and see a very acceptable increase in distance but much more feel on all shots. These shafts also hit the ball much straighter which is a huge advantage over the XP series. Everyone is different so much of these advantages for me may be different with different swings.
Date published: 2016-05-27
Rated 5 out of 5 by from Great Supplier Bought xp95 shafts for old Ping i10 irons. Rejuvenated them!
Date published: 2015-12-25
Rated 5 out of 5 by from Great shafts! I switch from KBS tour shafts to the XP95's and couldn't be more pleased with the performance. Put these shafts in my Titleist CB's and haven't looked back.
Date published: 2016-01-22
Rated 5 out of 5 by from love XP95 I love the shaft it feels soft and high trajectory I gain more distance with this shaft then all my other shafts in the past. I have them on my 714 AP2 irons and my SM6 wedges.I love my XP95's because its the lightest golf shaft I ever play and helps me to shot lower scores.Thank you True Temper for improving my game and play my best golf.
Date published: 2017-04-21
Rated 5 out of 5 by from Excellent performing shaft. Another winner for True Temper! Great feel with great performance!
Date published: 2015-06-30
  • y_2017, m_10, d_15, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_17
  • loc_en_US, sid_TT0101, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

Went through a trackman fitting. Have Ping i irons with the CFS regular shafts. I hit my 7 iron 135 yards and gained trajectory (like) & 2 mph ball speed with xp95 regular. 3 handicap, should I consider soft stepping with xp95 reg for more flex?

Asked by: GolfinSouthCarolina
If you soft step one club you will be making the shaft play approximately a quarter of a flex more flexible. That might be just enough without making the shafts play to flexible and could possibly work well for you.
Answered by: JimY
Date published: 2017-10-09

The XP 95 .355 shafts are listed as 93 grams for Reg. Is this the raw weight before trimming? I planned on soft stepping the shafts twice and cut .5 inch short. What would be the approximate trimmed weight for a 5 iron?

Asked by: Tom
Yes the 93 grams is the raw weight before trimming. Your finished weight would depend on the manufacuture and model 5 iron you have and what is your finished length? Assuming a 38" finished length 5 iron installed into a clubhead with a 1.25" bottom of bore to ground line the shaft would be cut to 36.75" and the shaft weight would be in the 87 to 88 gram range.
Answered by: JimY
Date published: 2017-10-02

Thank you JimY. Since I am a senior, I benefit from the more flexible Nippon 8950 shafts but I find that I hit them too high. I like the XP95's trajectory but I don't hit them as far. Would soft stepping twice be a closer match to 8950s?

Asked by: Tom
Soft stepping could twice would be a half a flex change and it would make the butt stiffness of the XP95 more flexible then the 8950. The XP95 should still be stiffer in the tip and that could create the trajectory you are looking for. If it were me I would try one before I reshafted the whole set.
Answered by: JimY
Date published: 2017-09-26

Looking at the specs, the XP95 seems to be constant weight. I was wondering if I "soft-step" them once, would they play more like the Nippon 8950s in term of flex?

Asked by: Tom
The XP95 is stiffer in the middle and lower part of the shaft then the 8950GH. They butt frequencies are basically the same. Even soft stepped one shaft I would expect the 8950GH to feel more flexible than the XP95.
Answered by: JimY
Date published: 2017-09-25

I have read on your site that the Nippon NS Pro 8950 plays much softer than flex indicated. What about the XP 95? They seem to have similar weight. Do they play truer to flex with similar ball flight?

Asked by: Tom
The XP95 is stiffer in the tip section in both the R and S flexes, which would make them feel stiffer and could possibly produce a slightly lower ball flight. I would say that the XP95 would probably feel more like traditional R and S flexes. That being said, a lot of players like the Nippon because it provides a softer feel for the given flex.
Answered by: GW2002
Date published: 2017-09-21

Will these shafts work for the callaway steelhead xr irons?

Asked by: Neil
For the Callaway Steelhead XR irons you need the TT0113 XP95 shafts. These irons use a .370" parallel tip shaft.
Answered by: JimY
Date published: 2017-09-05

Looking to replace shafts in Taylor made M2 irons and make them 1 in longer. Are these shafts tapered or parallel? Thanks

Asked by: Don
The M2 irons use a .370" parallel tip shaft and the XP95 TT0113 is the .370" tip size version. https://www.golfworks.com/true-temper-dynamic-gold-xp95-steel-iron-shafts/p/TT0113/
Answered by: JimY
Date published: 2017-08-28

I have the XP90 shafts in my Titleist AP2 716 irons and love them! They are spec'd at 95grams on the Titleist website. Are they the same as these XP95? Appreciate thoughts.

Asked by: NZ Golfer
No, the XP90 is not the same shaft as the XP95. The XP90 is made only for Titleist. The XP95 is the closest replacement and is a very close replacement. The XP90 is 2 grams heavier and is listed for as a mid/high trajectory shaft where the XP95 is a high trajectory shaft.
Answered by: JimY
Date published: 2017-08-16
  • y_2017, m_10, d_15, h_19CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_114
  • loc_en_US, sid_TT0101, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks