UST Mamiya Competition Graphite Iron Shaft

UST Mamiya Competition Graphite Iron Shaft


L/A Flex - 370 tip (80g) 1/2D3S
$14.99
Backordered
R/S Flex - 370 tip (83g) 3/4B2M
$14.99
In Stock
Pureing 
1-3 $19.50
4+ $17.50
Tip & Butt Trimming
$4.95
Tip Prepping
$2.95

UST Mamiya Competition Graphite Iron Shaft

The UST Competition 65 Graphite Iron Shaft - lightweight durable design provides the ultimate club building flexibility.

Features:
  • .370" tip diameter
  • Longer parallel sections and combination flexes can be trimmed to fit a wide variety of golfers
  • L / A flex designated "low kick point" and R / S flex designated "mid kick point"

Trimming Instructions

UST Competition 75 Golf Shaft Specifications

UST Mamiya Competition Graphite Iron Shaft is rated 5.0 out of 5 by 2.
Rated 5 out of 5 by from GREAT SHAFT. WOULD RECOMMEND IT TO ALL Absolutely a great shaft. True and very easy to work with and great to hit. Very happy with it and will buy more as needed!
Date published: 2016-08-03
Rated 5 out of 5 by from consistant performer I have used the 65 'competition' series for several years repairing clubs for my fellow golfers and have always had very good results and compliments on their performance. Recently, a friend asked to have his steel shafted Callaway irons replaced with the Competition 65 shaft to swing between regular and senior. I accomplished this by down-stepping the 'regular', and it fits his desires perfectly.
Date published: 2016-02-08
  • y_2017, m_6, d_23, h_14
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_2
  • loc_en_US, sid_US0045, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

I have a set of Big Bertha Tungsten Titanium irons that i want to re-shaft. Your OEM shaft replacement guide suggests to replace the RCH 96 shafts with the UST Competition Series Pro shafts. Is this correct, and how much would a set be installed sw - 4

Asked by: Tim
Our reshafting price is $19.95 per club plus the catalog price of the shaft. To verify the pricing based on the grip you want to use it would be best to contact Customer Service at 1-800-848-8358 and they can help you.
Answered by: JimY
Date published: 2017-05-22

I have a set of Taylor Made Burner 2.0 Irons, would I need a parallel tip or tapered?

Asked by: Dan
You need a .370" parallel tip shaft for the Taylor Made Burner 2.0 irons.
Answered by: JimY
Date published: 2017-05-22

tipping instructions for Competition 65 iron shaft for a flex

Asked by: Tom
For the A flex you follow trim code IR11. Here is the link for the trimming chart. Scroll down the page to the iron trim chart and follow IR11. http://www.golfworks.com/images/art/shaft_trim_inst.pdf
Answered by: JimY
Date published: 2016-10-14

Is it possible to make the tip .355 taper ? I am looking for a good graphite shaft to replace steel shafts in Titleist AP1 714 irons (4-9,P,W, - 8 shafts). If not, could you recommend reg. flex graphite w/ .355 taper tip to use in this application ?

Asked by: JoePuck
We could special order the Competition Series Graphite shafts from UST with a .355" taper tip to fit the AP1 irons. You would need to contact our Customer Service at golfworks@golfworks.com or by calling 1-800-848-8358 and they can help you with the special order. Another shaft I would recommend that will fit the AP1 irons is the Xcaliber (AS0028) which is available in a .355" taper tip. It is a very good inexpensive shaft. http://www.golfworks.com/search.asp?ss=as0028
Answered by: JimY
Date published: 2017-06-07

What does the "R/S" stand for? Is the shaft ready to be installed gripped and brought to the course? Or are there any other parts I need?

Asked by: Chris
R/S means it is a combination flex shaft that can be made to either an R flex or an S flex by following the shaft trimming instructions. We do offer a Shaft Prep service where we will cut the shaft for the flex that you want. We can also install the grips if you would like. It might be worth a call to our Customer Service Department and let them help you with your questions and your order. 1-800-848-8358
Answered by: JimY
Date published: 2016-08-31

Do you cut the butt or tip cut the UST iron shafts?

Asked by: Chip
With the US0045 iron shafts you will cut both the tip and butt. You will cut the tip to create the flex for each club number and cut the butt end for the finished length you want the clubs to be.
Answered by: JimY
Date published: 2016-08-15

Need to replace nickent 3DX RC graphite SR 2.5 R flex 75 gram shaft. What low cost shaft do you recommend?

Asked by: Chet
For good inexpensive shafts the UST Competition Series 65, Grafalloy ProCustom (TT202214) and the new Aldalite (AL0061) could all be good choices. http://www.golfworks.com/aldila-aldalite-graphite-wood-shaft-l-flex/p/AL0061/ http://www.golfworks.com/grafalloy-pro-custom-graphite-wood-shaft/p/TT202214/
Answered by: JimY
Date published: 2017-06-07

tip trimming length for 65 series iron shaft i want to trim for stiff flex

Asked by: donny
Trim code for the US0045 R/S combination flex shaft is IR11 for the Stiff flex. IR11 trim code is: 2" tip trim for 3 iron, 2.5" for a 4 iron, 3" for a 5 iron, 3.5" for a 6 iron, 4" for the 7 iron, 4.5" for the 8 iron, and 5" for the 9, PW, 5" maximum tip trim. After tip trimming, trim to final playing length from the butt of the shaft.
Answered by: GW2002
Date published: 2016-03-18
  • y_2017, m_6, d_23, h_1CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_9
  • loc_en_US, sid_US0045, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks