UST Mamiya DHI Series Graphite Hybrid Shaft

UST Mamiya DHI Series Graphite Hybrid Shaft

L Flex - 370 tip (55g) 1D3M
In Stock
A Flex - 370 tip (66g) 2D3M
R Flex - 370 tip (69g) 3B2M
In Stock
S Flex - 370 tip (72g) 4B2M
In Stock
1-3 $19.50
4+ $17.50
Tip & Butt Trimming
Tip Prepping

UST Mamiya DHI Series Graphite Hybrid Shaft

  • Low cost alternative for players seeking the material and weight advantages of graphite.
  • Designed to enhance trajectory in all types of hybrid designs.

Trimming Instructions

UST DHI Series Graphite Hybrid Shaft Specifications

UST Mamiya DHI Series Graphite Hybrid Shaft is rated 5.0 out of 5 by 2.
Rated 5 out of 5 by from Great service I have installed all shafts and am very pleased with the results. I am also pleased with the service and rapid delivery of the shafts.
Date published: 2015-06-08
Rated 5 out of 5 by from Perfect fit I reshafted a #5 hybrid for a client who had a shaft that was much too stiff for him and he is very happy with the "new club".
Date published: 2015-07-18
  • y_2017, m_6, d_26, h_22
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_2
  • loc_en_US, sid_US0083, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

how long are these shafts untrimmed?

Asked by: mikesihon
The L flex is 39" and the A,R & S flexes are 41". At this link if you scroll down the page you can see the length measurements as well as all the specifications for these shafts.
Answered by: JimY
Date published: 2017-05-12

I have a Wilson Staff FG tour M3 hybrid with a aldila rip phenom Regular shaft in it I want to put an A flex in the club any suggestions I was looking at this shaft as a replacement. Can the adapter be switched to the new shaft?

Asked by: Kazooblue
The UST dhi Hybrid would be a more flexible option in the A flex. Would be lighter as well. It is a high trajectory shaft as well. A slightly heavier option in the A flex and a high trajectory would be the Kinetixx TS-H Series Hybrid (code PK0103). You can have he adaptor removed from the existing shaft and installed on the new shaft.
Answered by: GW2002
Date published: 2017-04-21

Trim instructions for US0083, A flex please

Asked by: Dick83
You can follow the trimming instructions under UST Mamiya at this link. or the tip trimming is as follows: H1 = 0" H2 = 1/2" H3 = 1" H4 = 1 1/2" H5 = 2"
Answered by: JimY
Date published: 2016-09-26

Where are the trim codes for these shafts? Catalog says "see web"; website says "P.64".

Asked by: Idaho Luke
The trim instructions are: H1 - 0", H2 - 1/2", H3 - 1", H4 - 1 1/2", H5 - 2". These amounts are to be trimmed from the tip, then after assembly cut to final playing length from the butt of the shaft.
Answered by: GW2002
Date published: 2016-08-24

Shaft is for hybrid for girl 13,  5' tall, I have to shorten the shaft a bit.  I am getting L flex.  She has large hands and actually needs a mens reg grip.  The L flex butt diam. is on .578", how much tape will approximate .600" butt diam?

Asked by: tomp1947
Depending on how much you shorten this shaft it will likely get smaller at the butt end then .578" which means you will need more then just 2 build up wraps. Without knowing how much shorter you will be making this club it is hard to say for sure just how many build up wraps you will need.
Answered by: JimY
Date published: 2016-03-25

Can I use A flex in my Callaway Razr X irons?

Asked by: Tum
  • y_2017, m_6, d_27, h_4CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_6
  • loc_en_US, sid_US0083, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks