UST Mamiya Frequency Filtered Putter Shaft

UST Mamiya Frequency Filtered Putter Shaft


Straight - 370 tip (106g) 37.75"
$29.99
In Stock
Straight - 355 tip (106g) 37.75"
$29.99
In Stock
Double Bend - 370 tip (106g) 37.75"
$29.99
In Stock
Pureing 
1-3 $19.50
4+ $17.50
Tip & Butt Trimming
$4.95
Tip Prepping
$2.95

UST Mamiya Frequency Filtered Putter Shaft

The new Frequency Filtered™ putter shaft amplifies touch and feel. And if you like to feel every putt, then you are about to feel real good. This radically new putter shaft design improves the ability of all players to perceive or feel where ball impact occurs on the face. This instantaneous feedback results in improved putting ability since the player learns to consistently stroke more putts on the sweet spot of the putter. Feel becomes clearer and so does the confidence to make solid contact to sink more putts.

Filtering Diffuser in the mid-section filters out higher, unwanted vibrations. Therefore, only the true feeling of the ball impacting the putter face is released to the hands.

Interlinked Carbon fiber in the butt-section creates a tremendous amount of hoop strength for a consistently solid feel in the hands.

Steel tip-section makes the shaft a perfect fit for the hottest putter heads on the market.

  • .355" and .370" tip diameters available
  • Frequency Filtered technology promotes feel on every putt
  • Straight and double bend profiles available

Trimming Instructions

UST Mamiya Frequency Filtered Putter Shaft is rated 5.0 out of 5 by 10.
Rated 5 out of 5 by from Like Butter!!! Let me start off by saying that the guys/gals at golf works are GREAT...seriously customer service out of the blocks quick and on point with getting your needed info for the club/shaft. Put the shaft in a Nike Method 90 butter head....now if you haven't tried these putters they have a lot of feedback as it is...with this shaft....OOOOBOY like butter. You can feel everything distance, where it hits the face all of it. Ive played 3 rounds so far and its made my putting go so much better no more 3 putts or as many two putts longer then 2 feet left. Great would say the best thing I've done for my golf game in years.
Date published: 2016-05-26
Rated 5 out of 5 by from Should be Illegal!! Everyone must try this shaft!! I'm shocked that I'm not seeing it being used on tour, but maybe it is and just not seeing it? I literally went from being an 'average' putter to an 'above average' putter. Almost every putt I hit has a chance of going in! We spend hundreds on driver shafts but forget to look at the shaft for the club that actually scores!!
Date published: 2013-09-17
Rated 5 out of 5 by from Smooth Sensation I had The GolfWorks install this shaft in an Odyssey 2-Ball putter. They did and excellent job of matching the bend and lie angle adjustments. The shaft has a very smooth sensation when making a stroke. The ball rolls excellent, and the feel is awesome!!!
Date published: 2010-05-27
Rated 5 out of 5 by from Great shaft! Made a huge difference in my alignment. I've had a center shafted oddessy 2 ball which was imperceptibly closed a few degrees which caused a consistent pull to the left that I couldn't for the life of me correct. This shaft was different enough for a try. Immediate difference, no problem with straight putts if I miss now it's because of my inability to read a break. Shaft has great feel and sure catches people's eye's. I'm a happy camper now!!!
Date published: 2017-04-02
Rated 5 out of 5 by from Should be Illegal!! Everyone must try this shaft!! I'm shocked that I'm not seeing it being used on tour, but maybe it is and just not seeing it? I literally went from being an 'average' putter to an 'above average' putter. Almost every putt I hit has a chance of going in! We spend hundreds on driver shafts but forget to look at the shaft for the club that actually scores!!
Date published: 2013-09-17
Rated 5 out of 5 by from WOW The only word I can say is WOW, the feel is UN HEARD OF, took 3 strokes off by my second round. WOW!!!
Date published: 2010-02-26
Rated 5 out of 5 by from WOW The only word I can say is WOW, the feel is UN HEARD OF, took 3 strokes off by my second round. WOW!!!
Date published: 2010-02-26
Rated 5 out of 5 by from Smooth Sensation I had The GolfWorks install this shaft in an Odyssey 2-Ball putter. They did and excellent job of matching the bend and lie angle adjustments. The shaft has a very smooth sensation when making a stroke. The ball rolls excellent, and the feel is awesome!!!
Date published: 2010-05-27
  • y_2017, m_11, d_22, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_10
  • loc_en_US, sid_US0010P, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

2 questions. Do you know the hosel size of the Cleveland classic 17-4 belly putter? I am looking to make a 33 inch putter, i see these come at 37 inches. What would be the proper way to trim the shaft to the desired length? Tip, butt, both?

Asked by: Td27
Cleveland uses .370" tip size shafts in this putter. The instructions for this shaft would be to install it into the putter and cut from the butt end for your 33" finished length.
Answered by: JimY
Date published: 2017-11-08

I have a Scotty Cameron "GOLO5" putter. Do you have a shaft for that? It appears to have a single bend with a slight offset.

Asked by: HWK
We do not know for sure which shaft the Cameron GoLo 5 uses. In looking at a picture it looks like it may not be a 90 degree hosel angle. It looks like the post angles towards the face a little. If this is the case the US0012P double bend shaft will fit this putter. If the post comes straight up from the head at 90 degrees we do not stock a double bend shaft that will fit this putter but could special order the Frequency Filtered shaft from UST. Unfortunately neither the folks at Cameron or Titleist will give out information on their putter shafts so unless we have one to work on we have not way of checking for the correct shaft.
Answered by: JimY
Date published: 2017-10-12

I want to put one of these in my Scotty Cameron Del Mar it has a flared tip can I get one of these to work. 

Asked by: Sean
We do not stock the UST Frequency Filtered Putter shaft with the Flare tip. UST does make one and we can special order it for you. You will need to call Customer Service at 1-800-848-8358 and they can help you with your order.
Answered by: JimY
Date published: 2017-11-21

does anybody know what is the tip diameter for the miura km-006 putter? i am trying to buy a frequency filtered shaft for my putter but they come in two sizes 0.370 and 0.355, i hope someone can help with that. thanks!!!

Asked by: Jose72
An educated guess would be .370" but I do not know that for sure. I have sent an email to Muira but have not heard back from them yet. I will post an answer as soon as I hear from them.
Answered by: JimY
Date published: 2017-09-12

I have a newport 2 Crown and Cameron 33" which shaft would I require?

Asked by: Schlueter
Sorry for the Frequency Filtered Putter shaft you would use the US0011P .355" tip size shaft for this Cameron & Crown Newport 2 putter.
Answered by: JimY
Date published: 2017-09-11

I have an Odessey Versa #7 will this double bend shaft fit that putter head?

Asked by: kbusterdee
Yes the US0012P will fit the Odyssey Versa #7 putter.
Answered by: JimY
Date published: 2017-08-28

Which shaft would I need for a Scotty Cameron X5 Dual Balance?

Asked by: THO
What we do not know about the Cameron X5 Dual Balanced putter is whether Cameron uses a .370" parallel tip shaft or a .355" taper tip putter shaft. Cameron does use a lot of .355" taper tip double bend putter shafts. If it is a .370" parallel tip the US0012P shaft could work. If it is a .355" taper tip there is not a UST Frequency Filtered putter shaft that will fit. Sorry for not knowing the hosel bore size but the folks at Cameron and Titleist will not give out that information and we have not had one in for repair that we could check the bore size.
Answered by: JimY
Date published: 2017-11-21

On the UST site, they list 2 double-bend .370 putter shafts. Will both work for a 90 degree .370 bore? Which do you stock? What is a 'Plane' ? 580P2B1P P 106g 0.580" 0.370" 0.0" / 2 Bend - 1 Plane 580P2B2P P 106g 0.580" 0.370" 0.0" / 2 Bend - 2 Plane

Asked by: leef2020
The UST Frequecny Filtered shaft we stock is the 1 Plane and it is actually an Odyssey Replacement shaft. It will not work in a 90 degree bore. We can special order the 2 Plane shaft for you. It will work in a 90 degree bore. You would need to contact Customer Service at 1-800-848-8358 and they can help you with the special order.
Answered by: JimY
Date published: 2017-08-16
  • y_2017, m_11, d_22, h_21CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_98
  • loc_en_US, sid_US0010P, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks