UST Mamiya Frequency Filtered Putter Shaft

UST Mamiya Frequency Filtered Putter Shaft

Straight - 370 tip (106g) 37.75"
In Stock
Straight - 355 tip (106g) 37.75"
In Stock
Double Bend - 370 tip (106g) 37.75"
In Stock
1-3 $19.50
4+ $17.50
Tip & Butt Trimming
Tip Prepping

UST Mamiya Frequency Filtered Putter Shaft

The new Frequency Filtered™ putter shaft amplifies touch and feel. And if you like to feel every putt, then you are about to feel real good. This radically new putter shaft design improves the ability of all players to perceive or feel where ball impact occurs on the face. This instantaneous feedback results in improved putting ability since the player learns to consistently stroke more putts on the sweet spot of the putter. Feel becomes clearer and so does the confidence to make solid contact to sink more putts.

Filtering Diffuser in the mid-section filters out higher, unwanted vibrations. Therefore, only the true feeling of the ball impacting the putter face is released to the hands.

Interlinked Carbon fiber in the butt-section creates a tremendous amount of hoop strength for a consistently solid feel in the hands.

Steel tip-section makes the shaft a perfect fit for the hottest putter heads on the market.

  • .355" and .370" tip diameters available
  • Frequency Filtered technology promotes feel on every putt
  • Straight and double bend profiles available

Trimming Instructions

UST Mamiya Frequency Filtered Putter Shaft is rated 5.0 out of 5 by 5.
Rated 5 out of 5 by from Like Butter!!! Let me start off by saying that the guys/gals at golf works are GREAT...seriously customer service out of the blocks quick and on point with getting your needed info for the club/shaft. Put the shaft in a Nike Method 90 butter if you haven't tried these putters they have a lot of feedback as it is...with this shaft....OOOOBOY like butter. You can feel everything distance, where it hits the face all of it. Ive played 3 rounds so far and its made my putting go so much better no more 3 putts or as many two putts longer then 2 feet left. Great would say the best thing I've done for my golf game in years.
Date published: 2016-05-26
Rated 5 out of 5 by from Should be Illegal!! Everyone must try this shaft!! I'm shocked that I'm not seeing it being used on tour, but maybe it is and just not seeing it? I literally went from being an 'average' putter to an 'above average' putter. Almost every putt I hit has a chance of going in! We spend hundreds on driver shafts but forget to look at the shaft for the club that actually scores!!
Date published: 2013-09-17
Rated 5 out of 5 by from Smooth Sensation I had The GolfWorks install this shaft in an Odyssey 2-Ball putter. They did and excellent job of matching the bend and lie angle adjustments. The shaft has a very smooth sensation when making a stroke. The ball rolls excellent, and the feel is awesome!!!
Date published: 2010-05-27
Rated 5 out of 5 by from WOW The only word I can say is WOW, the feel is UN HEARD OF, took 3 strokes off by my second round. WOW!!!
Date published: 2010-02-26
Rated 5 out of 5 by from UST Mamiya Frequency Filtered Putter Shaft Great product. Nice shaft, easy to work with. Fast shipping, too.
Date published: 2017-02-11
  • y_2017, m_3, d_29, h_1
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_5
  • loc_en_US, sid_US0010P, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

Hello,  I would like to buy a few of these shafts to put into some of my different putters. I just want to make sure that I order the right models.  - Edel 'The Brick' - Odyssey #5 CS white steel  - Odyssey Protype #3

Asked by: Bacon
We do not stock a Frequency Filtered Putter shaft to fit the Edel Brick. The Edel shaft is actually a double bend with no offset and UST does not offer a Frequency Filter putter shafts with those bends. The Odyssey #5 CS putter would use the US0010P and the Prototype 3 would also use the US0010P shaft.
Answered by: JimY
Date published: 2017-03-27

Would the straight shaft fit into the Taylormade Spider Tour Black putter? If so, would tip diameter size? Thanks.

Asked by: MichaelB
The Spider Tour Black putter that uses a straight shaft would use the US0010P shaft. If you have the model with the double bend shaft I do not believe that we would have a Frequency Filtered Putter shaft that would work. Taylor Made does use .370" tip size putter shafts.
Answered by: JimY
Date published: 2017-03-20

Can you tell me the lie angle used for the Odyssey putter shaft? Any chance it would fit another putter with a 70 degree bore heel shaft?

Asked by: BColts
The Odyssey double bend shaft is set up to create a 70 degree lie angle. Odyssey putters that use a double bend shaft do not have a 90 degree bore or post angle. The bore or post is actually angle slightly towards the putter face. The Odyssey putter shaft will not fit a 70 degree bore heel shafted putter.
Answered by: JimY
Date published: 2017-02-13

What shaft would fit a Scotty Cameron squareback 1 ? Also could I send my putter into you to install? 

Asked by: Wyndance
We do not stock a UST Frequency Filtered putter shaft that will fit this Cameron Putter. The double bend UST Frequency Filtered putter shaft is an Odyssey replacement shaft and it is not designed for a 90 degree hosel bore or post. I cannot tell for sure from looking at a picture if this putter has a 90 degree post. The folks at Titleist and Cameron will not give out this information on the Cameron putters. If it is a 90 degree post we could special order the UST Frequency Filtered putter shaft for this putter. You would need to contact GolfWorks Customer Service and they can help you with a special order.
Answered by: JimY
Date published: 2017-02-13

What shaft will fit in a Scotty Cameron Select Newport (2013)? Thanks!

Asked by: MAK
The Cameron Newport (2013) uses a .355" taper tip putter shaft. In the UST Frequency Filtered shafts it would be the US0011P or in a steel shaft it would use the YST.
Answered by: JimY
Date published: 2017-01-31

I have a Nike 006 Method.  Plumber neck Rory model.  .370 which style shaft would work? Thanks 

Asked by: Dreday
If it is a .370" tip diameter shaft the US0010P in the UST Frequency Filtered shaft will fit. You could use any .370" tip diameter straight putter shaft for this putter. All of the following shafts could work. TT0001P, TT1008P, FS0007P, FS0006P, FS0051, AP0005 & AP0006.
Answered by: JimY
Date published: 2017-01-30

What shaft for a bettinardi studio stock 14?

Asked by: Thardy
I do not know for sure what tip size shaft is used in this Bettinardi putter. I have sent them an email and as soon as I hear back from them I will post a reply.
Answered by: JimY
Date published: 2017-01-23

Hey there, I have a Machine M2A converter I'd love to equip with this shaft. I can't find any info regarding shaft diameter. Do I need a .355 or a .370?? Any info is appreciated

Asked by: Ganzoo
I sent and email to the company asking what tip size shafts they used in the Machine M2A Converter putters. They tell me that the majority of these putters use a .370" tip diameter but that they have done some custom orders where they were made to use a .355" taper tip putter shaft.
Answered by: JimY
Date published: 2017-01-18
  • y_2017, m_3, d_28, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_71
  • loc_en_US, sid_US0010P, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks