UST Mamiya MP6 Graphite Iron Shafts

UST Mamiya MP6 Graphite Iron Shafts

L Flex 41" - .370 tip (54g) 1D3M
In Stock
A Flex 41" - .370 tip (66g) 2D2M
In Stock
R Flex 41" - .370 tip (69g) 3B2M
In Stock
S Flex 41" - .370 tip (72g) 4B2M
In Stock
1-3 $19.50
4+ $17.50
Tip & Butt Trimming
Tip Prepping

UST Mamiya MP6 Graphite Iron Shafts

  • Perfect compliment to the MP5 Micro Lite Wood shafts
  • Ultralite weight iron design developed to provide improved distance in irons, while providing great feel and control
  • Modern technology in an ultralite graphite iron shaft, at an affordable price

Trimming Instructions

UST MP6 Shaft Specifications

UST Mamiya MP6 Graphite Iron Shafts is rated 4.7 out of 5 by 3.
Rated 4 out of 5 by from Good Shaft for us old guys Playing Mizuno MP32 Forged irons with True Temper R300 steel shafts and losing lots of distance. Decided to replace True Temper with the MP6 Graphite and it's working out great. More distance and the club is a lot lighter. Should have done this several years ago
Date published: 2015-08-21
Rated 5 out of 5 by from Get ball up Installed in TE forged set. Minimal distance gains but shaft helps "launch" the ball. Higher trajectory than I prefer but some great looking shots with good bite around the green. If your having trouble getting the ball up, this shaft would be worth looking at. Good feel/feedback and direction
Date published: 2016-05-27
Rated 5 out of 5 by from Steady Consistant Performance This shaft feels wonderful, gives a medium ball flight and looks great. Combine a fair price, and fast shipping and you have a near perfect product.
Date published: 2016-12-10
  • y_2018, m_1, d_17, h_9
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.6
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_3
  • loc_en_US, sid_US0062, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

When will the stiff flex mp6 iron shaft be back in stock ?

Asked by: Smitty
We are showing the S flex MP6 iron shafts should be in stock next week.
Answered by: JimY
Date published: 2018-01-08

I bought the MP6 shafts for my Irons. What are the recommended trimming instructions? no info came with the shafts.

Asked by: Jim51
If you have the A,R, or S flex you follow trim code IR3 on page 2 of this link. If you have the L flex you follow IR20 on page 2 at this link.
Answered by: JimY
Date published: 2017-07-31

What does pureing the shaft do?

Asked by: Mac
SST PURE identifies asymmetries that exist in every golf shaft and locates each shaft's most stable orientation. This results in more consistent performance and uniform feel from club to club.
Answered by: Admin
Date published: 2017-05-03

Does this shafr come in a .355 tip?  If not what would be your closest to it?

Asked by: Bob
No the MP6 iron shafts do not come stock in a .355" taper tip. We can special order these shafts from UST with a .355" taper tip. You would need to contact our Customer Service Department at 1-800-848-8358 or by email at The closest shaft to these specifications, especially weight, in a.355" taper tip would be the UST Recoil 65 (US0100) or the Aerotech SteelFiber 70CW (AT0020iE).
Answered by: JimY
Date published: 2017-01-06

The shaft UST MAMIYA MP6 can it replace the shafts used on K. PING clubs. Thanks

Asked by: PATRICK
The MP6 iron shafts will not fit the Ping K irons. The Ping K irons use a .355" tip diameter shaft and the MP6 shafts are only available in a .370" tip size which is to large to fit the Ping K irons. A shaft like the Xcaliber (AS0028) could be used in the Ping K irons and could work well.
Answered by: JimY
Date published: 2016-09-06

Do you carry any .355 senior flex iron shafts

Asked by: Don
We stock the Aerotech Steel Fiber 70CW (AT0020I) in an A (Senior) flex shaft. We also have the Paderson Kinetixx TS-I Trajectory Series Iron (PA0105) shafts in an A (Senior) flex. We can special order any of the UST Recoil .370" iron shafts with a .355" taper tip from UST. For a special order you would need to contact our Customer Service Department at or by calling 1-800-848-8358.
Answered by: JimY
Date published: 2016-08-08

Need to reshaft a set of Callaway Fusion Wide Sole irons that have the bore-through shaft design. Do I have to specifically order bore-through shafts of would these UST MP6 shafts work?

Asked by: Randy
You could use the UST MP6 iron shafts for the Callaway Fusion Irons. The rule of thumb when reshafting a bore through iron is to subtract 1" from the recommended trimming instructions, assuming you can, to maintain the flex of the shaft. Failing to do this will make the shafts play almost a full flex stiffer then what is listed on the shaft. Callaway bore through irons use a .370" parallel tip shaft but then they cut slots length wise in the tip end of the shaft to compress the tips down to a .350" size. These are not the easiest reshaft.
Answered by: JimY
Date published: 2016-04-04

Does the UST Mamiya MP6  come in a .355 taper

Asked by: Afey
The MP6 is not made in a .355" taper tip. We can special order them from UST with a .355" taper tip. You would need to contact our customer service at or by calling 1-800-848-8358 and they will help you with this order.
Answered by: JimY
Date published: 2017-02-02
  • y_2018, m_1, d_17, h_9CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.6
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_15
  • loc_en_US, sid_US0062, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks