UST Mamiya ProForce V2 Graphite Hybrid Shaft

UST Mamiya ProForce V2 Graphite Hybrid Shaft

R Flex - 335 tip (70g) 3B2M
In Stock
S Flex - 335 tip (73g) 4B2M
In Stock
A Flex - 370 tip (79g) 2B2M
In Stock
R Flex - 370 tip (84g) 3B2M
In Stock
S Flex - 370 tip (86g) 4B2M
In Stock
X Flex - 370 tip (90g) 5B2M
In Stock
1-3 $19.50
4+ $17.50
Tip & Butt Trimming
Tip Prepping

UST Mamiya ProForce V2 Graphite Hybrid Shaft

The UST Proforce V2 Graphite Hybrid Shaft features a balanced tip section for a higher launch and increased ball speed.

  • .335" and .370" tip diameters available
  • Fiber orientation in the butt and mid section creates a hoop strength that gives this shaft a unique stable feel
  • Optimized torque reduces spin for superior control

Trimming Instructions

Not Found.

I plan on re-shafting my 15-degree hybrid to a 42-inch length with this shaft. In a stiff flex what is the tip trimming recommendation?

Asked by: Lou63
You will find the trimming instructions right at the top of the first page at this link. The 15 degree would be considered an H1.
Answered by: JimY
Date published: 2017-05-23

why for regular is 335 tip - 70g and for senior 370 tip - 78g ?. 335 tip is not to narrow for a hybrid ?. I have a stage 2 hybrid 4 tour head and few adaptador of 335. Thank

Asked by: masio922
The difference in the weights for the .335" tip and .370" tip is just how UST made them. The .335" tip shafts can also be used in fairway woods. There have been very few .335" tip size hybrid shafts. Titleist and Cobra have use .335" tip size shafts in hybrids in the past. If you have the Taylor Made Rocketballz Stage 2 hybrid it uses a .370" tip size shaft.
Answered by: JimY
Date published: 2017-03-06

I am wanting to reshaft a Titleist 915hd and don't know the hosel depth. I if give you the playing length of the club would you be able to trim and prep the shaft based on that info?

Asked by: TLaw
Yes we can trim and prep the shaft for your playing length. You will need to give us that information when you place your order. If you order online put that information in the Special Instruction box at Checkout.
Answered by: JimY
Date published: 2017-02-09

I'm looking to get the .335 72g for my Nike vapor flex 3 wood for a higher launch. But I'm wondering if there is a way to make it play closer to an x flex? 

Asked by: Kyrazzy
The general rule of thumb with graphite shafts is 1" is equal to a change of shaft flex. If I were using the US0013H .335" tip shaft into a 3 wood I would tip trim 0" normally and if I trimmed 1/2" it would make it play between an S and X flex and 3/4" would be closer to the X flex.
Answered by: JimY
Date published: 2017-01-26

I have a taylor made slider rescue I need a new shaft , I do not know the specifics for this kind of shaft as far a fit it says its a speeder 72h and its a flex s.

Asked by: Don
Speeder shafts are manufactured by Fujikura and the 72 tells us it is a 72 gram weights shaft. The S tells us it is a Stiff flex. We have a new Fujikura Vista Pro Hybrid 60 (FK0087) shaft for 2017. The S flex weights 68 grams and it would likely have similar playing characteristics as the stock Speeder shaft you had. The ProForce V2 is a very good shaft but at 86 grams on the S flex a little heavier then the 72 gram Speeder shaft.
Answered by: JimY
Date published: 2017-01-24

I need a senior shaft for a Nike Vapor Fly Hybrid. The Mamiya with a .370 tip will fit? (A Flex 370 tip (79g) 2B2M). I also need a senior shaft for Driver and 3 Wood both Nike Vapor Fly. The Mamiya wood shafts w/the adaptor will fit those heads?

Asked by: Henrique
Yes the US0013H A flex .370" tip hybrid shaft will fit the Nike Vapor Fly Hybrid. Both the Nike Vapor Fly driver and 3 wood use a .335" tip diameter shaft. The ProForce V2 55 A flex (US0001W) will fit both the driver and 3 wood.
Answered by: JimY
Date published: 2016-12-01

I have a Ping G10 24 degree hybrid and I would like to replace the standard Ping graphite shaft with a proforce v2 stiff shaft.  Which should I buy.

Asked by: john 71
The Ping G10 Hybrid uses a .355" taper tip shaft. We do not have this shaft in a .355" taper tip to fit the Ping G30. We would have to special order the .370" tip size version from UST with a .355" taper tip. We do not stock any hybrid shafts with a .355" taper tip size. You could contact our International Trade Accounts Manager, Donna Ours, at and she could help you with this special order.
Answered by: JimY
Date published: 2016-10-26

I need a shaft for Titleist 913 driver. Do you have this in stock? If so, please send length and price.

Asked by: Dr hook
For the ProForce V2 shaft the code is US0001W and we offer it in 55, 65, and 75 gram weights. The price of the shaft is $59.99. You can order the shaft at this link and if you scroll down the page to the specification box you can see the specifications for each weight shaft.
Answered by: JimY
Date published: 2016-08-01
  • y_2017, m_5, d_24, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_15
  • loc_en_US, sid_US0013H, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks