UST Mamiya Recoil 110 Taper Iron Shafts

UST Mamiya Recoil 110 Taper Iron Shafts


Recoil 110, S Flex - 355", 41.0" (#2 Iron) 108g - 4B1M
$44.99
In Stock
Recoil 110, S Flex - 355", 40.5" (#3 Iron) 108g - 4B1M
$44.99
Backordered
Recoil 110, S Flex - 355", 40.0" (#4 Iron) 108g - 4B1M
$44.99
Backordered
Recoil 110, S Flex - 355", 39.5" (#5 Iron) 108g - 4B1M
$44.99
In Stock
Recoil 110, S Flex - 355", 39.0" (#6 Iron) 108g - 4B1M
$44.99
Backordered
Recoil 110, S Flex - 355", 38.5" (#7 Iron) 108g - 4B1M
$44.99
In Stock
Recoil 110, S Flex - 355", 38.0" (#8 Iron) 108g - 4B1M
$44.99
In Stock
Recoil 110, S Flex - 355", 37.5" (#9 Iron) 108g - 4B1M
$44.99
In Stock
Recoil 110, S Flex - 355", 37.0" (Wedge) 108g - 4B1M
$44.99
Backordered
Recoil 110, X Flex - 355", 41.0" (#2 Iron) 108g - 5B1M
$44.99
Backordered
Recoil 110, X Flex - 355", 40.5" (#3 Iron) 108g - 5B1M
$44.99
In Stock
Recoil 110, X Flex - 355", 40.0" (#4 Iron) 108g - 5B1M
$44.99
In Stock
Recoil 110, X Flex - 355", 39.5" (#5 iron) 108g - 5B1M
$44.99
In Stock
Recoil 110, X Flex - 355", 39.0" (#6 Iron) 108g - 5B1M
$44.99
Backordered
Recoil 110, X Flex - 355", 38.5" (#7 Iron) 108g - 5B1M
$44.99
Backordered
Recoil 110, X Flex - 355", 38.0" (#8 Iron) 108g - 5B1M
$44.99
In Stock
Recoil 110, X Flex - 355", 37.5" (#9 Iron) 108g - 5B1M
$44.99
Backordered
Recoil 110, X Flex - 355", 37.0" (Wedge) 108g - 5B1M
$44.99
In Stock
Pureing 
1-3 $19.50
4+ $17.50
Tip & Butt Trimming
$4.95
Tip Prepping
$2.95

UST Mamiya Recoil 110 Taper Iron Shafts

Finally, a revolutionary technology that will change how you think about iron shafts. UST Mamiya’s new recoil iron shafts are a game changer. In the past, heavy weight graphite iron shafts felt dead and stiff. With UST Mamiya’s exclusive recoil™ technology, we have brought feel back into the shaft, while allowing players to hit a wide range of shots that result in better distance control and pin seeking accuracy.

By positioning over 19 different layers within the shaft, we were able to create a design that outperforms the best steel shafts in the market.

  • Mid-weight option in a .355 taper tip design.
  • Designed for more efficient loading and unloading on partial and full shots, providing better distance and trajectory control.
  • Recoil™ 110 produces a medium to lower shot trajectory.
  • Trimming Instructions

    UST Recoil Graphite Iron Shaft Specifications

    UST Mamiya Recoil Taper Iron Shafts is rated 5.0 out of 5 by 3.
    Rated 5 out of 5 by from So far so good. I only purchased the shaft for my three iron to test out. My iron set is Mizuno MP4's with KBS C-Taper 120 shafts. Excellent shafts but if I played in a three day tournament they would wear me out. I was skeptical about graphite shafts for my irons but decided to give it a try after researching and reading about the Recoil 110 Stiff shafts. The test so far has been outstanding and if it continues I will replace all my iron shafts with the Recoil. It is true, I cannot tell it is a graphite shaft and the ball explodes off the club face. But as everyone knows the true test is on the golf course. Stay tuned.....
    Date published: 2015-11-10
    Rated 5 out of 5 by from Excellent graphiteshaft ... I have tested many GRAPHITE shafts for IRONS and this is the best one so far.
    Date published: 2015-07-30
    Rated 5 out of 5 by from Great feel I put these shafts in all of my irons about six months ago and finally converted my wedges a few weeks ago. Great decision. Great feel with just enough feedback.
    Date published: 2017-03-02
    • y_2017, m_3, d_20, h_22
    • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_3
    • loc_en_US, sid_US0087, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
    • clientName_golfworks

    I just wanted to make sure that this Recoil 110 shaft will fit into my Callaway X Forged 2013 3 iron head.

    Asked by: Greg
    Yes the Recoil 110 shaft will fit the 2013 X Forged irons. These irons are a .355" taper hosel bore.
    Answered by: JimY
    Date published: 2017-03-08

    I took your fitting guide test and it said I need a 110 prototype shaft, I can't seem to find it here, is that the X shaft?

    Asked by: John
    The Recoil 110 Prototype shaft is only available through he UST TSPX Fitters. The GolfWorks is a UST TSPX Fitter but we do not stock the 110 Prototype because we have gotten very little demand for this shaft. We can special order the shafts for you. You would need to contact our Customer Service Department at 1-800-848-8358 or by email at golfworks@golfworks.com and they can help you with your order.
    Answered by: JimY
    Date published: 2017-01-26

    Hi, which flexpoint has the Standard recoil 110 F4 shaft (mid-high, mid or mind-low)? Thanks for your support. Best regards europegolf

    Asked by: europegolf
    The Recoil 110 F4 is a mid bend point firm tip design.
    Answered by: JimY
    Date published: 2017-01-12

    I am looking to reshaft my Corbra King F6 irons with the UST recoil proto 110 however my irons are .370 (parallel tip) - Does the 110 come in parallel tip ? can I use a shim or what is a suggested graphite replacement ?

    Asked by: MB1432
    The Recoil 110 does not come in .370" parallel. You could still use the Recoil 110 if you were to also use shims. below is the link for the brass shims: (.355 to .370) http://www.golfworks.com/the-golfworks-brass-adaptor-shims/p/SHIM/
    Answered by: Brent Dill
    Date published: 2016-10-07

    2013 X forged with KBS tour not on the list from JimY. Suspect a 370 tip so how what would I need to shim it properly?

    Asked by: Jimmy
    The 2013 X Forged irons are listed on the spreadsheet right before the 2013 X Utility Prototype irons. The X Forged irons are listed as a .355" taper tip. http://www.golfworks.com/images/art/Callaway.pdf
    Answered by: JimY
    Date published: 2016-08-02

    I want to try these in my callaways. I have lbs tour now can I switch my four iron to try?

    Asked by: Jimmy
    It depends on which Callaway irons you have. If your Callaway irons use a .355" taper tip then the US0087 Recoil 110 shafts will fit well. If your Callaway irons use a.370" parallel tip shaft then you would have to shim the .355" taper tip shaft to fit the .370" hosel bore. At this link you can check an see what tip size shafts your Callaway irons use. http://www.golfworks.com/images/art/Callaway.pdf
    Answered by: JimY
    Date published: 2016-08-01

    need a shaft for my Apex UT 21* Utility. playing KBS C-Taper Lite stiff's io other irons and love them, want something a little lighter to help launch the UT. You think Recoil 95 F4 proto or Recoil F4 110?

    Asked by: Wes121
    The Recoil 95 and 110 shafts are designed for a mid ball flight and even though they are lighter then your C-taper lite shaft may not give you the higher ball flight. In the 95 gram weight range a steel shaft like the Nippon N.S. Pro 950GH (NP0012) or True Temper XP95 (TT0101) might give you a higher ball flight then the Recoil 95 or 110 shafts.
    Answered by: JimY
    Date published: 2016-08-01

    what is  the easiest fitting collard ferrule for recoil 110  on adams xtd forged head  thanks

    Asked by: golfer
    I always use a .370" ferrule with .355" taper tip shafts. Taper tip shafts taper out to approximately .370" where the shaft exits the top of the hosel. The .370" ferrule will fit and go on a little easier and fits the outside diameter of the hosel a little better then the taper tip hosel. Ferrule like the 74PI or 61PI would work well. Also during assembly if you put a thin layer of epoxy on the shaft tip before you install the ferrule they will go on a lot easier.
    Answered by: JimY
    Date published: 2016-04-14
    • y_2017, m_3, d_21, h_24CST
    • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0
    • cp_1, bvpage1
    • co_hasquestionsanswers, tq_12
    • loc_en_US, sid_US0087, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_golfworks