UST Mamiya Recoil 660/670/680 Irons

UST Mamiya Recoil 660/670/680 Irons

Recoil 660 Iron, A Flex - 370" tip (68g) 2B2M -
In Stock
Recoil 660 Iron, R Flex - 370" tip (71g) 3B2M -
Recoil 670 Iron, R Flex - 370" tip (75g) 3B2M -
In Stock
Recoil 670 Iron, S Flex - 370" tip (78g) 4B2M -
In Stock
Recoil 680 Iron, S Flex - 370" tip (82g) 4B2M -
In Stock
1-3 $19.50
4+ $17.50
Tip & Butt Trimming
Tip Prepping

UST Mamiya Recoil 660/670/680 Irons

Finally, a revolutionary technology that will change how you think about iron shafts. UST Mamiya’s new recoil iron shafts are a game changer. In the past, heavy weight graphite iron shafts felt dead and stiff. With UST Mamiya’s exclusive recoil™ technology, we have brought feel back into the shaft, while allowing players to hit a wide range of shots that result in better distance control and pin seeking accuracy.

By positioning over 19 different layers within the shaft, we were able to create a design that outperforms the best steel shafts in the market.

  • Great feel and lightweight options to increase club head speed for greater distance
  • Lighter weights for faster club speed
  • Medium to medium high ball flight
  • Trimming Instructions

    UST Recoil Graphite Iron Shaft Specifications

    UST Mamiya Recoil Irons is rated 4.9 out of 5 by 15.
    Rated 5 out of 5 by from Recoil iron shafts I have been building clubs for 20 years, just assembled a set of irons with 660 shafts, have to say some of the best feeling shafts I have ever assembled. Shaft loads and performs won't be disappointed, plays true to flex...
    Date published: 2015-05-26
    Rated 5 out of 5 by from Great lateral control perfect ball flight. I now have two sets of irons with the shafts. I am 64 and a 3 handicap. Hit my 7 iron about 155 with light weight steel stiff shafts about 163 to 165 with UST shafts. Can shape my shots. Hit it high or low. The best shafys I have found for me yet. Very consistent daft to shaft. Picked up 9 to 10 yards carry with my 4 iron. 195 to 205. Big difference.
    Date published: 2016-08-10
    Rated 5 out of 5 by from Great lightweight shaft Good enough to be used by an LPGA pro. Lightweight, consistent .
    Date published: 2015-07-28
    Rated 5 out of 5 by from Mamiya 670 F3 Recoil graphite shafts!!! Fantastic graphite shafts that give you the feel of steel along with the lightweight performance of graphite. I'm a 56 yr old male that used to have tired/sore shoulders and forearms after every round of golf or visit to the range. Not with my new Regular flex Recoil 670s. AWESOME!!!
    Date published: 2016-07-14
    Rated 5 out of 5 by from great shaft I use these shafts the (recoil 660and 670) for re-shafting my hybrids. The weight increase, though minor) is perfect for me. My only complaint is that the 680 does not come in regular stiffness. A real good stick.
    Date published: 2015-06-24
    Rated 5 out of 5 by from great shafts I put these shafts in my old Cleveland TA5 gunmetal irons (6 to PW). On the launch monitor at my local golf fitter I hit these clubs further than "new" irons from cleveland, TM, Titleist, Callaway and Mizuno. The fitter was just laughing, he finally said- "ok, you got me, the new graphite shafts are as controllable as iron shafts and are longer (in my case 10 yds). I also put the Recoil 95's in my PW, SW and LW. I hit them higher and again about 10 yds longer. Most importantly way better feel on chip and pitch shots. I am 58, 12 index and no longer have sore joint pain in shoulders, hands and elbows. UST graphite irons are all over LPGA and now are showing up on champions tour. My prediction is next big advances in technology is increased iron distance. This distance will come more from shafts then club material design. My fitter (a very good one) agrees. So try your favorite set you have used over past 15-20 yrs(remember those DCI's ;-) with these shafts- try it in one club, say 7i, be objective and you may surprise yourself and scare the *%#! out of your buddies. BTW I installed shift shafts and not R (f4 in UST speak). Fitter was very good at explaining that the correct stiffness is a factor of both swing speed and tempo and not just swing speed.
    Date published: 2017-01-28
    Rated 5 out of 5 by from Golf shaft Didn't get to buy it they discontinued the shaft. The shaft is great in my pitching wedge. Wish I could buy the rest of my set.
    Date published: 2015-08-16
    Rated 4 out of 5 by from Alternative to light weight steel I made a set of equal length irons with these shafts and I am very satisfied with the irons which I made. They are slightly stiffer than the rating, but are very consistent.
    Date published: 2016-01-23
    • y_2017, m_12, d_10, h_24
    • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_15
    • loc_en_US, sid_US0072, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
    • clientName_golfworks

    660 or 670, is it possible to get either of these up to a firm frequency

    Asked by: Tim
    I do not have any assembled frequency numbers with the Recoil shafts to compare what might make a firm frequency. The Recoil shafts have a 5.5" parallel tip length and we recommend keeping 1.5" of parallel tip length for proper installation. To create a firm flex, between and R and S flex, you would have to start with the S flex (F4) and tip trim less then what is recommended to create an in between flex. Approximately 1/2" less tip trimming would create an in between flex but I am not sure what frequency it will create.
    Answered by: JimY
    Date published: 2017-12-04

    Trim spec calls for 1 inch tip trim.If I add a 10 gram weight to tip do I have to trim extra off tip.if I do cut extra off tip does that change flex. Thks

    Asked by: Brad
    If adding 10 grams of weight gets you into a normal swingweight range then no you would not do any addtional tip trimming. A heavier then normal swingweight will make the shaft play more flexible and a lighter then normal swingweight will make the shaft play stiffer. An average swingweight would be in the D2 range.
    Answered by: JimY
    Date published: 2017-12-04

    Just cleaned out hostels on cf16 1.5 inches deep. my new recoils only go in 1.25 Leaving .25 gap at bottom can I use that gap for the 10 gram tungsten weight. Seems hosel is slightly tapered I tried putting pulled shaft  in they two only go in 1.25 

    Asked by: Squat17
    With the tip weight installed in the shaft you want it to install all the way to the bottom of the bore. If you were installing the shaft without the tip weight you would want the shaft to go all the way to the bottom of the bore. Make sure you have sanded the shaft properly. With the Recoil shafts once the tip is sanded it should be the same color as the unpainted butt end of the shaft.
    Answered by: JimY
    Date published: 2017-12-04

    Tip trim instruction state 4 inches off tip for a PW. Will that change the reg flex to a stiff flex. How much tip section is there on these 670 recoil shafts. Doing my first reshaft don’t want to mess this up.seems 4 inches off tip seems like a lot.

    Asked by: squat17
    No, tipping the R flex 4" for the PW will make the R flex play like an R flex based on the clubhead weight of the PW. These Recoil shafts have a 5.5" parallel tip section.
    Answered by: JimY
    Date published: 2017-11-27

    tork on 660 UST Mamiya iron shaft reg flex

    Asked by: Cjs
    The torque on the 660 R flex is 4.3 degrees. At this link if you scroll down the page you will see the specifications for this shaft including the torque.
    Answered by: JimY
    Date published: 2017-11-22

    My swing speed is 92 mph. What is the best recoil shaft for me. 5'4" tall

    Asked by: Bodine
    If your 92 mph swingspeed is a driver swingspeed it puts you into the high end of an R flex. We reference 77 to 92 mph for R flex and 93 to 107 mph for S flex. We also reference a 7 iron from 150 yards for an R flex and an 8 iron from 150 yards for an S flex.
    Answered by: JimY
    Date published: 2017-11-13

    Do you carry the UST Mamiya recoil in the .355 taper tip 

    Asked by: Len
    No, UST does not offer the 660/670/680 Recoil shafts stock in a .355" taper tip. We can possibly special order them for you with a .355" taper tip from UST. You would need to call our Customer Service Department at 1-800-848-8358.
    Answered by: JimY
    Date published: 2017-11-06

    which shaft fit in Titleist 716 AP 1? ido need regular

    Asked by: iron men
    The Titleist 716 AP1 irons use a .355" taper tip shaft.
    Answered by: JimY
    Date published: 2017-10-18
    • y_2017, m_12, d_10, h_24CST
    • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
    • cp_1, bvpage1
    • co_hasquestionsanswers, tq_174
    • loc_en_US, sid_US0072, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_golfworks