UST Mamiya Recoil 660/670/680 Irons

UST Mamiya Recoil 660/670/680 Irons


Recoil 660 Iron, A Flex - 370" tip (68g) 2B2M -
$29.99
In Stock
Recoil 660 Iron, R Flex - 370" tip (71g) 3B2M -
$29.99
Backordered
Recoil 670 Iron, R Flex - 370" tip (75g) 3B2M -
$29.99
In Stock
Recoil 670 Iron, S Flex - 370" tip (78g) 4B2M -
$29.99
In Stock
Recoil 680 Iron, S Flex - 370" tip (82g) 4B2M -
$29.99
In Stock
Pureing 
1-3 $19.50
4+ $17.50
Tip & Butt Trimming
$4.95
Tip Prepping
$2.95

UST Mamiya Recoil 660/670/680 Irons

Finally, a revolutionary technology that will change how you think about iron shafts. UST Mamiya’s new recoil iron shafts are a game changer. In the past, heavy weight graphite iron shafts felt dead and stiff. With UST Mamiya’s exclusive recoil™ technology, we have brought feel back into the shaft, while allowing players to hit a wide range of shots that result in better distance control and pin seeking accuracy.

By positioning over 19 different layers within the shaft, we were able to create a design that outperforms the best steel shafts in the market.

  • Great feel and lightweight options to increase club head speed for greater distance
  • Lighter weights for faster club speed
  • Medium to medium high ball flight
  • Trimming Instructions

    UST Recoil Graphite Iron Shaft Specifications

    UST Mamiya Recoil Irons is rated 4.9 out of 5 by 14.
    Rated 5 out of 5 by from Recoil iron shafts I have been building clubs for 20 years, just assembled a set of irons with 660 shafts, have to say some of the best feeling shafts I have ever assembled. Shaft loads and performs outstandingly...you won't be disappointed, plays true to flex...
    Date published: 2015-05-26
    Rated 5 out of 5 by from Great lightweight shaft Good enough to be used by an LPGA pro. Lightweight, consistent .
    Date published: 2015-07-28
    Rated 5 out of 5 by from Great lateral control perfect ball flight. I now have two sets of irons with the shafts. I am 64 and a 3 handicap. Hit my 7 iron about 155 with light weight steel stiff shafts about 163 to 165 with UST shafts. Can shape my shots. Hit it high or low. The best shafys I have found for me yet. Very consistent daft to shaft. Picked up 9 to 10 yards carry with my 4 iron. 195 to 205. Big difference.
    Date published: 2016-08-10
    Rated 5 out of 5 by from Mamiya 670 F3 Recoil graphite shafts!!! Fantastic graphite shafts that give you the feel of steel along with the lightweight performance of graphite. I'm a 56 yr old male that used to have tired/sore shoulders and forearms after every round of golf or visit to the range. Not with my new Regular flex Recoil 670s. AWESOME!!!
    Date published: 2016-07-14
    Rated 5 out of 5 by from great shaft I use these shafts the (recoil 660and 670) for re-shafting my hybrids. The weight increase, though minor) is perfect for me. My only complaint is that the 680 does not come in regular stiffness. A real good stick.
    Date published: 2015-06-24
    Rated 4 out of 5 by from Alternative to light weight steel I made a set of equal length irons with these shafts and I am very satisfied with the irons which I made. They are slightly stiffer than the rating, but are very consistent.
    Date published: 2016-01-23
    Rated 5 out of 5 by from Golf shaft Didn't get to buy it they discontinued the shaft. The shaft is great in my pitching wedge. Wish I could buy the rest of my set.
    Date published: 2015-08-16
    Rated 5 out of 5 by from BEST IRON SHAFT EVER! Put these in my Taylormade RSi1's...amazing! Just don't put them in your wedges, they will reduce your spin in those.
    Date published: 2016-09-01
    • y_2017, m_2, d_19, h_6
    • bvseo_bulk, prod_bvrr, vn_bulk_0.0
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_14
    • loc_en_US, sid_US0072, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
    • clientName_golfworks

    What is the kick point (ball flight) of the ust recoil, 670, F4 stiff shaft???

    Asked by: Hogleg
    The Recoil 670 F4 (S flex) is designed to create a mid/high trajectory. UST does not list a bend point for this shaft but being a mid/high trajectory design it would likely be mid/low bend point.
    Answered by: JimY
    Date published: 2017-02-10

    I am currently using a ProForce 75 Gold R flex iron shaft. Are these available any more?

    Asked by: Don
    The ProForce RV2 iron shafts are being discontinued by UST. I am told that we may still get some more in stock. We are checking with UST to verify that information and as soon as we get a reply I will post an update for you.
    Answered by: JimY
    Date published: 2017-02-09

    I need three wedge shafts of the recoil 670 iron in R flex but they're all .355" tapered.  Are these available somewhere?  Thanks

    Asked by: PRN
    The Recoil 670 shafts would have to be special ordered with a .355" taper tip. UST does not make them in a stock .355" taper tip. We can special order these shafts for you. You need to contact our Customer Service Department at 1-800-848-8358 or by email at golfworks@golfworks.com and they can help you.
    Answered by: JimY
    Date published: 2017-01-30

    what UST Recoil shaft F2 flex will fit Ping G irons ?

    Asked by: mike
    We do not have a stock Recoil shaft in an F2 flex that will fit the Ping irons. Ping uses .355" taper tip shafts. We can special order a Recoil shaft in either the 460 or 660 in an F2 flex from UST in a .355" taper tip. You would need to contact Customer Service at 1-800-848-8358 or by email at golfworks@golfworks.com and they can help you with the special order.
    Answered by: JimY
    Date published: 2017-01-27

    Will the 660 fit the 714 AP2 irons?

    Asked by: teetimetom1960
    No the stock Recoil 660 shafts will not fit the 714 AP2 irons. We can special order the Recoil 660 shafts from UST with a .355" taper tip to fit the 714 AP2 irons. You would need to contact our Customer Service Department at 1-800-848-8358 or by email at golfworks@golfworks.com and they can help you with the special order.
    Answered by: JimY
    Date published: 2017-01-26

    I have been asked to change the shafts in a set of Callaway XR irons . They currently have Recoil 680 stiff shafts and he wants Recoil regular flex shafts installed. Do I need .370 parallel or .355 tapered shafts?

    Asked by: Bogeyman5
    The Callaway irons use a .370" parallel tip shaft. http://www.golfworks.com/images/art/Callaway.pdf
    Answered by: JimY
    Date published: 2017-01-26

    Do these shafts exist in L flex

    Asked by: Gigi
    The only Recoil that UST makes in an L flex is the 450ES and 450 (F1). F1 is the indication for the L flex. We will have the 450ES F1 in right around the end of January. http://www.golfworks.com/ust-mamiya-recoil-450-460-es-graphite-iron-shafts/p/US0101/
    Answered by: JimY
    Date published: 2017-01-24

    I have Ben Hogan Apex Edge Forged irons that have Ben Hogan steel apex edge 3 (H-00089978) steel shafts and would like to replace them with mamiya recoil graphite shafts. which ones would be best fit.

    Asked by: chuck
    The Hogan Apex is a .355" taper tip shaft. We can special order any of the .370" parallel tip Recoil shafts from UST in a .355" taper tip. We stock the Recoil 65 (US0100), 95 (US0085), 110 (US0087) & 125 (US0088) in .355" taper tip. For a special order you would need to contact Customer Service at 1-800-848-8358 or by email at golfworks@golfworks.com.
    Answered by: JimY
    Date published: 2017-01-25
    • y_2017, m_2, d_19, h_9CST
    • bvseo_bulk, prod_bvqa, vn_bulk_0.0
    • cp_1, bvpage1
    • co_hasquestionsanswers, tq_121
    • loc_en_US, sid_US0072, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_golfworks