UST Mamiya Recoil 660/670/680 Irons

UST Mamiya Recoil 660/670/680 Irons


Recoil 660 Iron, A Flex - 370" tip (68g) 2B2M -
$29.99
Backordered
Recoil 660 Iron, R Flex - 370" tip (71g) 3B2M -
$29.99
Backordered
Recoil 670 Iron, R Flex - 370" tip (75g) 3B2M -
$29.99
Backordered
Recoil 670 Iron, S Flex - 370" tip (78g) 4B2M -
$29.99
Backordered
Recoil 680 Iron, S Flex - 370" tip (82g) 4B2M -
$29.99
In Stock
Pureing 
1-3 $19.50
4+ $17.50
Tip & Butt Trimming
$4.95
Tip Prepping
$2.95

UST Mamiya Recoil 660/670/680 Irons

Finally, a revolutionary technology that will change how you think about iron shafts. UST Mamiya’s new recoil iron shafts are a game changer. In the past, heavy weight graphite iron shafts felt dead and stiff. With UST Mamiya’s exclusive recoil™ technology, we have brought feel back into the shaft, while allowing players to hit a wide range of shots that result in better distance control and pin seeking accuracy.

By positioning over 19 different layers within the shaft, we were able to create a design that outperforms the best steel shafts in the market.

  • Great feel and lightweight options to increase club head speed for greater distance
  • Lighter weights for faster club speed
  • Medium to medium high ball flight
  • Trimming Instructions

    UST Recoil Graphite Iron Shaft Specifications

    UST Mamiya Recoil Irons is rated 4.9 out of 5 by 14.
    Rated 5 out of 5 by from Recoil iron shafts I have been building clubs for 20 years, just assembled a set of irons with 660 shafts, have to say some of the best feeling shafts I have ever assembled. Shaft loads and performs outstandingly...you won't be disappointed, plays true to flex...
    Date published: 2015-05-26
    Rated 5 out of 5 by from Great lightweight shaft Good enough to be used by an LPGA pro. Lightweight, consistent .
    Date published: 2015-07-28
    Rated 5 out of 5 by from Great lateral control perfect ball flight. I now have two sets of irons with the shafts. I am 64 and a 3 handicap. Hit my 7 iron about 155 with light weight steel stiff shafts about 163 to 165 with UST shafts. Can shape my shots. Hit it high or low. The best shafys I have found for me yet. Very consistent daft to shaft. Picked up 9 to 10 yards carry with my 4 iron. 195 to 205. Big difference.
    Date published: 2016-08-10
    Rated 5 out of 5 by from Mamiya 670 F3 Recoil graphite shafts!!! Fantastic graphite shafts that give you the feel of steel along with the lightweight performance of graphite. I'm a 56 yr old male that used to have tired/sore shoulders and forearms after every round of golf or visit to the range. Not with my new Regular flex Recoil 670s. AWESOME!!!
    Date published: 2016-07-14
    Rated 5 out of 5 by from great shaft I use these shafts the (recoil 660and 670) for re-shafting my hybrids. The weight increase, though minor) is perfect for me. My only complaint is that the 680 does not come in regular stiffness. A real good stick.
    Date published: 2015-06-24
    Rated 4 out of 5 by from Alternative to light weight steel I made a set of equal length irons with these shafts and I am very satisfied with the irons which I made. They are slightly stiffer than the rating, but are very consistent.
    Date published: 2016-01-23
    Rated 5 out of 5 by from Golf shaft Didn't get to buy it they discontinued the shaft. The shaft is great in my pitching wedge. Wish I could buy the rest of my set.
    Date published: 2015-08-16
    Rated 5 out of 5 by from BEST IRON SHAFT EVER! Put these in my Taylormade RSi1's...amazing! Just don't put them in your wedges, they will reduce your spin in those.
    Date published: 2016-09-01
    • y_2017, m_3, d_28, h_22
    • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_14
    • loc_en_US, sid_US0072, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
    • clientName_golfworks

    I am interested in the recoil shafts. I have Ping 25 irons. I am 69 years old and swing speed is about 85-90 mph. Which would you recommend?

    Asked by: Ron
    The Ping irons take a .355 taper tip shaft. In the Recoil, you might want to consider the Recoil 65 Iron shaft (US0100) in the F3 - R flex. If you might thing the 65 gram shaft is too light, you could try the Recoil 95. The lighter weight 65 is a mid/high trajectory shaft vs a mid trajectory in the 95. The lighter weight would be beneficial in helping maintain your clubhead speed, or even increase it slightly, for improved distance. Would recommend trying just one in a #6 or #7 iron before investing in the entire set. You want to be sure like the feel as well as the performance.
    Answered by: GW2002
    Date published: 2017-03-21

    Concerning the recoil 680 irons for 29.99 each, are they the F4 or F5 model?

    Asked by: Kevin
    We stock the Recoil 680 in only the F4 flex. On their web site UST only lists this shaft being available in the F4 flex.
    Answered by: JimY
    Date published: 2017-03-20

    What's the ETA on these and the 660 and 760 ES recoils being in stock? Thanks.

    Asked by: Lee
    Currently we are showing next week for the 660 and the first week of April for the 760ES.
    Answered by: JimY
    Date published: 2017-03-19

    Have Cleveland 588mt irons w/ust mamiya actionlite 55, 370 tip, s-flex. 8 iron = 150yds. Have set of recoil 680 f4, shafts. Are these shafts a good replacement or can you recommend? Thanks.

    Asked by: terry
    The ActionLite 55 S flex shaft in the Cleveland 588MT irons was listed at 64 grams. The Recoil 680 S flex shaft is an 82 gram shaft. If you are wanting the heavier weight then the Recoil could be a good choice. We do not stock a Recoil shaft in an S flex that would match the playing characteristics of he ActionLite 55. The New Recoil 460ES in an S flex, which we would have to order would be the closest match.
    Answered by: JimY
    Date published: 2017-03-02

    I have a set of jpx 850 forged irons with xp 115 steel shafts. I would like to replace them with Mamiya 660 f3 recoil shafts. Are they in stock or do you have to order. they have 070 tip. What is the cost to change the shafts?

    Asked by: charlie
    The Mizuno JPX 850 irons use a .355" taper tip shaft. We would have to order the Recoil 660 F3 shafts from UST with a .355" taper tip. The stock Recoil 660 shafts are only available with a .370" parallel tip and are too large to fit the JPX 850 irons. Our reshaft price is $19.95 per club plus the cost of the shafts. For the special order you will need to call our Customer Service Department at 1-800-848-8358 and they will help you with the special order and all you pricing questions.
    Answered by: JimY
    Date published: 2017-02-27

    Can the shafts be cut and tip prepped at .335 for Ping irons?

    Asked by: Monty
    No, we would have to special order these Recoil shafts from UST cut and prepped for installation into the .355" taper hosel bores of the Ping irons. You would need to call our Customer Service Department at 10800-848-8358 and they can help you with the special order.
    Answered by: JimY
    Date published: 2017-02-21

    What is Pureing Shaft intail?

    Asked by: Bob
    There is no such thing as a perfectly round perfectly straight golf shaft. Puring identifies the shafts most stable plane of oscillation so that the shaft can be aligned in this position when installed so that it will play as if it is perfectly round and straight. Here is the link for the SST Pure web site where you can read and see how the process is done. https://www.golfworks.com/graphite-shaft-extensions/p/GSE/
    Answered by: JimY
    Date published: 2017-02-20

    What is the kick point (ball flight) of the ust recoil, 670, F4 stiff shaft???

    Asked by: Hogleg
    The Recoil 670 F4 (S flex) is designed to create a mid/high trajectory. UST does not list a bend point for this shaft but being a mid/high trajectory design it would likely be mid/low bend point.
    Answered by: JimY
    Date published: 2017-02-10
    • y_2017, m_3, d_29, h_24CST
    • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0
    • cp_1, bvpage1
    • co_hasquestionsanswers, tq_127
    • loc_en_US, sid_US0072, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_golfworks