UST Mamiya Recoil 660/670/680 Irons

UST Mamiya Recoil 660/670/680 Irons


Recoil 660 Iron, A Flex - 370" tip (68g) 2B2M -
$29.99
Backordered
Recoil 660 Iron, R Flex - 370" tip (71g) 3B2M -
$29.99
In Stock
Recoil 670 Iron, R Flex - 370" tip (75g) 3B2M -
$29.99
In Stock
Recoil 670 Iron, S Flex - 370" tip (78g) 4B2M -
$29.99
In Stock
Recoil 680 Iron, S Flex - 370" tip (82g) 4B2M -
$29.99
In Stock
Pureing 
1-3 $19.50
4+ $17.50
Tip & Butt Trimming
$4.95
Tip Prepping
$2.95

UST Mamiya Recoil 660/670/680 Irons

Finally, a revolutionary technology that will change how you think about iron shafts. UST Mamiya’s new recoil iron shafts are a game changer. In the past, heavy weight graphite iron shafts felt dead and stiff. With UST Mamiya’s exclusive recoil™ technology, we have brought feel back into the shaft, while allowing players to hit a wide range of shots that result in better distance control and pin seeking accuracy.

By positioning over 19 different layers within the shaft, we were able to create a design that outperforms the best steel shafts in the market.

  • Great feel and lightweight options to increase club head speed for greater distance
  • Lighter weights for faster club speed
  • Medium to medium high ball flight
  • Trimming Instructions

    UST Recoil Graphite Iron Shaft Specifications

    UST Mamiya Recoil Irons is rated 4.9 out of 5 by 14.
    Rated 5 out of 5 by from Recoil iron shafts I have been building clubs for 20 years, just assembled a set of irons with 660 shafts, have to say some of the best feeling shafts I have ever assembled. Shaft loads and performs outstandingly...you won't be disappointed, plays true to flex...
    Date published: 2015-05-26
    Rated 5 out of 5 by from Great lateral control perfect ball flight. I now have two sets of irons with the shafts. I am 64 and a 3 handicap. Hit my 7 iron about 155 with light weight steel stiff shafts about 163 to 165 with UST shafts. Can shape my shots. Hit it high or low. The best shafys I have found for me yet. Very consistent daft to shaft. Picked up 9 to 10 yards carry with my 4 iron. 195 to 205. Big difference.
    Date published: 2016-08-10
    Rated 5 out of 5 by from Great lightweight shaft Good enough to be used by an LPGA pro. Lightweight, consistent .
    Date published: 2015-07-28
    Rated 5 out of 5 by from Mamiya 670 F3 Recoil graphite shafts!!! Fantastic graphite shafts that give you the feel of steel along with the lightweight performance of graphite. I'm a 56 yr old male that used to have tired/sore shoulders and forearms after every round of golf or visit to the range. Not with my new Regular flex Recoil 670s. AWESOME!!!
    Date published: 2016-07-14
    Rated 5 out of 5 by from great shaft I use these shafts the (recoil 660and 670) for re-shafting my hybrids. The weight increase, though minor) is perfect for me. My only complaint is that the 680 does not come in regular stiffness. A real good stick.
    Date published: 2015-06-24
    Rated 5 out of 5 by from great shafts I put these shafts in my old Cleveland TA5 gunmetal irons (6 to PW). On the launch monitor at my local golf fitter I hit these clubs further than "new" irons from cleveland, TM, Titleist, Callaway and Mizuno. The fitter was just laughing, he finally said- "ok, you got me, the new graphite shafts are as controllable as iron shafts and are longer (in my case 10 yds). I also put the Recoil 95's in my PW, SW and LW. I hit them higher and again about 10 yds longer. Most importantly way better feel on chip and pitch shots. I am 58, 12 index and no longer have sore joint pain in shoulders, hands and elbows. UST graphite irons are all over LPGA and now are showing up on champions tour. My prediction is next big advances in technology is increased iron distance. This distance will come more from shafts then club material design. My fitter (a very good one) agrees. So try your favorite set you have used over past 15-20 yrs(remember those DCI's ;-) with these shafts- try it in one club, say 7i, be objective and you may surprise yourself and scare the *%#! out of your buddies. BTW I installed shift shafts and not R (f4 in UST speak). Fitter was very good at explaining that the correct stiffness is a factor of both swing speed and tempo and not just swing speed.
    Date published: 2017-01-28
    Rated 5 out of 5 by from Golf shaft Didn't get to buy it they discontinued the shaft. The shaft is great in my pitching wedge. Wish I could buy the rest of my set.
    Date published: 2015-08-16
    Rated 4 out of 5 by from Alternative to light weight steel I made a set of equal length irons with these shafts and I am very satisfied with the irons which I made. They are slightly stiffer than the rating, but are very consistent.
    Date published: 2016-01-23
    • y_2017, m_7, d_24, h_22
    • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_14
    • loc_en_US, sid_US0072, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
    • clientName_golfworks

    What are the spin characteristics of the 680 F4? I am coming from AMT TI S400 and am an extreme high ball hitter with a 6 iron SS of 87 and driver SS of 110 plus. However I feel like whenever I demo the Apex 6 iron with 680 F4 I should be playing these.

    Asked by: Mr Constantine
    From having hit this shaft a number of times I would say it is a mid spin shaft. UST does not list any spin information for this shaft. It is a very good stable feeling shaft.
    Answered by: JimY
    Date published: 2017-07-12

    I have a set 3 to 9 tommy armour with dynamic gold 300s what shaft should I put on these clubs ,regular but what kind,speed is about 80

    Asked by: Mike007
    Depending on which Tommy Armour irons you have they may use a .355" taper tip shaft. The Recoil 660/670/680 shafts are only available in a .370" tip size shaft and they may not fit your Tommy Armour irons. The Recoil 65 (US0100) shafts are .355" taper tip and could be a good choice if your irons use a .355" taper tip. Older Tommy Armour 845 irons used a .355" taper tip shaft. https://www.golfworks.com/ust-mamiya-recoil-65-graphite-iron-shafts/p/US0100/ If you can tell me which model Tommy Armour irons you have there is a good chance I can tell you which tip size shafts they use and make some more specific recommendations for you.
    Answered by: JimY
    Date published: 2017-07-10

    Too many choices. I'm confused. Looking to change the shafts on my irons. Iron club head speed is in the 80's. I hit the ball very straight. I'm just looking for more distance and a bit of a higher ball flight. What Recoil shaft should I look at?

    Asked by: Dean
    One thing that comes into play is what irons do you have? You may need a .355" taper tip shaft and there are a few model Recoil shafts available in a .355" tip size. Other iron designs use a .370" tip size shaft and Recoil shafts like the 660/670/680 are available in a .370" tip or have to be special ordered with a .355" taper tip. In terms of making a recommendation it would also help to know which shafts you are currently playing. The Recoil 670 or 680 or the Recoil 780 ES (US0099) could be good choices based on your swingspeed and if your irons use a .370" tip size. For players who have been using a shaft like a True Temper Dynamic Gold the Recoil 95 (US0085) is a common choice based on it's lighter weight without being to light.
    Answered by: JimY
    Date published: 2017-07-05

    Will the 660 work in my Bridgestone JGR Hyrbrid irons?

    Asked by: clubmeister
    The Bridgestone website shows that both of these are .370
    Answered by: Klinger66
    Date published: 2017-06-27

    I have these shafts in my XR irons 660 regular shafts one inch over.  Can I put these into my hybrids and make them one inch over as well?  Would these shafts work in a hybrid or should I use different shafts.  Ball flight in irons high and long.

    Asked by: Ted
    Yes the Recoil iron shafts can be used in hybrids and can work well. You should have no problem making them 1" longer.
    Answered by: JimY
    Date published: 2017-06-19

    Hi Folks,   I just ordered four US00072 UST Recoil shafts for my 6, 8, 9, PW KE4S irons.   I purchased the same shaft for a 7 iron head.  Upon examination, the shafts that came are F3 vs. F4 (7 iron) and quite a bit longer.  same order #  What gives?

    Asked by: Joe
    Please contact our customer service department at 800-848-8358. They will be able to assist you with your order.
    Answered by: GW2002
    Date published: 2017-06-14

    Considering Recoil 660 F3 for 5 thru PW. I to take shafts to a qualified club fitter to install them. Confirm I only need order the 6 shafts and fitter will cut them to length of existing shafts. Puring for 6 = $17.50 total ?

    Asked by: willyturn
    Assuming the irons you have use a .370" tip size shaft you will need 6 shafts in the 660 F3 flex (US0072). The clubmaker will need to both tip and butt cut these shafts. Yes SST Puring would be $17.50 per shaft.
    Answered by: JimY
    Date published: 2017-06-12

    Can the Recoil shafts be butt trimmed to length and be used in hybrids ?

    Asked by: JVL
    Yes you could use the Recoil iron shafts in hybrids. I would still recommend some tip trimming if possible to help maintain the shaft flex. If you have a 3 hybrid you could follow the tip trimming recommendation for a 3 iron etc.
    Answered by: JimY
    Date published: 2017-06-08
    • y_2017, m_7, d_25, h_3CST
    • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
    • cp_1, bvpage1
    • co_hasquestionsanswers, tq_151
    • loc_en_US, sid_US0072, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_golfworks