UST Mamiya Recoil 95 Taper Iron Shafts

UST Mamiya Recoil 95 Taper Iron Shafts


Recoil 95 #2 Iron, R Flex - 355" tip 41.0" (93g) 3B1M -
$44.99
In Stock
Recoil 95 #3 Iron, R Flex - 355" tip 40.5" (93g) 3B1M -
$44.99
In Stock
Recoil 95 #4 Iron, R Flex - 355" tip 40.0" (93g) 3B1M -
$44.99
In Stock
Recoil 95 #5 Iron, R Flex - 355" tip 39.5" (93g) 3B1M -
$44.99
In Stock
Recoil 95 #6 Iron, R Flex - 355" tip 39.0" (93g) 3B1M -
$44.99
In Stock
Recoil 95 #7 Iron, R Flex - 355" tip 38.5" (93g) 3B1M -
$44.99
In Stock
Recoil 95 #8 Iron, R Flex - 355" tip 38.0" (93g) 3B1M -
$44.99
In Stock
Recoil 95 #9 Iron, R Flex - 355" tip 37.5" (93g) 3B1M -
$44.99
In Stock
Recoil 95 Wedge, R Flex - 355" tip 37.0" (93g) 3B1M -
$44.99
In Stock
Recoil 95 #2 iron, S Flex - 355" tip 41.0" (93g) 4B1M -
$44.99
In Stock
Recoil 95 #3 Iron, S Flex - 355" tip 40.5" (93g) 4B1M -
$44.99
In Stock
Recoil 95 #4 Iron, S Flex - 355" tip 40.0" (93g) 4B1M -
$44.99
In Stock
Recoil 95 #5 Iron, S Flex - 355" tip 39.5" (93g) 4B1M -
$44.99
In Stock
Recoil 95 #6 Iron, S Flex - 355" tip 39.0" (93g) 4B1M -
$44.99
In Stock
Recoil 95 #7 Iron, S Flex - 355" tip 38.5" (93g) 4B1M -
$44.99
In Stock
Recoil 95 #8 Iron, S Flex - 355" tip 38.0" (93g) 4B1M -
$44.99
In Stock
Recoil 95 #9 Iron, S Flex - 355" tip 37.5" (93g) 4B1M -
$44.99
In Stock
Recoil 95 Wedge, S Flex - 355" tip 37.0" (93g) 4B1M -
$44.99
In Stock
Recoil 95 #3 Iron, X Flex - 355" tip 40.5" (93g) 5B1M -
$44.99
In Stock
Recoil 95 #6 Iron, X Flex - 355" tip 39.0" (93g) 5B1M -
$44.99
In Stock
Recoil 95 #8 Iron, X Flex - 355" tip 38.0" (93g) 5B1M -
$44.99
In Stock
Recoil 95 #9 Iron, X Flex - 355" tip 37.5" (93g) 5B1M -
$44.99
In Stock
Recoil 95 Wedge, X Flex - 355" tip 37.0" (93g) 5B1M -
$44.99
In Stock
Pureing 
1-3 $19.50
4+ $17.50
Tip & Butt Trimming
$4.95
Tip Prepping
$2.95

UST Mamiya Recoil 95 Taper Iron Shafts

Finally, a revolutionary technology that will change how you think about iron shafts. UST Mamiya’s new recoil iron shafts are a game changer. In the past, heavy weight graphite iron shafts felt dead and stiff. With UST Mamiya’s exclusive recoil™ technology, we have brought feel back into the shaft, while allowing players to hit a wide range of shots that result in better distance control and pin seeking accuracy.

By positioning over 19 different layers within the shaft, we were able to create a design that outperforms the best steel shafts in the market.

  • Lightest weight option in a .355 taper tip.
  • Designed to produce efficient energy transfer for increased ball velocity and greater distance. 67% more efficient than steel.
  • Recoil™ 95 produces a medium ball flight.
  • Trimming Instructions

    UST Recoil Graphite Iron Shaft Specifications

    UST Mamiya Recoil Taper Iron Shafts is rated 4.5 out of 5 by 10.
    Rated 5 out of 5 by from Taylormade driving iron (UDI) shafts I bought the shafts to put in a collection (2-3-4) of Taylormade UDI's (driving irons). I liked the shafts overall but just felt they were a bit too stiff for my liking. I swapped the Recoil 95's shafts in stiff flex out for some Aerotech SteelFiber i95cw's shafts in stiff flex. It made all of the difference in the world, much more subtle feel & I felt that I wasn't required to swing hard & my best every time. I think if I had used the Recoil 95 shafts in regular flex, I would have been delighted & never would changed to the SteelFibers. All of my other clubs are stiff flex which leaves my thinking the Recoils are a bit firmer flex than others.
    Date published: 2016-07-17
    Rated 5 out of 5 by from Incredible Extremely easy on arthritic hands. About 9 yards per club longer. Higher ball flight. Worth eve rd y penny
    Date published: 2017-09-22
    Rated 5 out of 5 by from Great shafts. I recently reshafted my irons with Recoil 95 F3 shafts. I'm so glad I did. Very pleased with this shaft. Accurate and outstanding feel. Excellent product.
    Date published: 2016-04-11
    Rated 5 out of 5 by from A great replacement for irons Replaced , my KBS extra stiff for Recoil 95 X stiff, very happy..
    Date published: 2015-10-22
    Rated 4 out of 5 by from recoil shafts experience i have bought the recoil 95 grams stiff shafts last month and just started to use them. the feeling is i bit different but much better as i use to play with the S 300 steel shafts from Dynamic gold. i think i have to get use to them before giving my final review. all what i can tell that it feels nice and and comfortable. i should check on the swing weight once again as i feel loosing distance... it might be an adjustment to be made at the club fitting center .
    Date published: 2016-02-22
    Rated 5 out of 5 by from UST 95 Recoil Taper Tip Graphite Shaft I really like the shaft, but for me it's a litle too heavy. It's perfect for someone whose played stteel shafted irons. I''m used to a lighter graphite shaft (70-75 grams.) I'm requesting the 800 Series Recoil Shaft, which UST will only sell through their Club Fitting Alliances.
    Date published: 2015-07-01
    Rated 1 out of 5 by from Horrible Iron Shaft This was an experiment with an extra AP2 714 6 iron. I like to try different shafts to see how they perform. There was no performance AT ALL from this Recoil shaft. Dead as wood, no feel and loss of distance. Horrible.
    Date published: 2016-11-05
    Rated 5 out of 5 by from Great shaft I was looking for a steel weighted shaft. UT needed to remove the vibration and shock from my elbow & wrist. This shaft is the answer.
    Date published: 2017-04-15
    • y_2017, m_9, d_24, h_3
    • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_10
    • loc_en_US, sid_US0085, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
    • clientName_golfworks

    I would like to try an experiment on my Adams XTD Ti hybrid. I am aware I can use a Taylormade RBZ Stage 2 hybrid sleeve adaptor to fit in this hybrid, but will it be possible to use a UST Mamiya Recoil 95 2 iron shaft in this sleeve with a shim?

    Asked by: Big Bad Wolf
    The Recoil 95 is a .355" taper tip shaft and you would have to shim it to properly fit the shaft adaptor. Our SHIM15 works well for this assembly. https://www.golfworks.com/the-golfworks-brass-adaptor-shims/p/SHIM/
    Answered by: JimY
    Date published: 2017-06-27

    I have the Callaway UT 21 degree with standard length of 39.5" KBS steel stiff.  I want to replace with recoil graphite reg flex.  Do I keep the stock length 39.5 or 40.5 length recommended for the 3 iron?

    Asked by: Rob
    Callaway actually assembled this club 1/4" longer when they used a graphite shaft. This is done to help maintain the same swingweight with the graphite shaft that you had with the steel shaft.
    Answered by: JimY
    Date published: 2017-05-26

    Do I need to use shims to install these shafts on Callaway apex pro 16 irons?

    Asked by: Weatherman2112
    The Callaway Pro Apex irons have a.355 hosel bore and the US0085 shafts are a .355 tip diameter shaft, so you do not need shims for installation.
    Answered by: GW2002
    Date published: 2017-03-23

    Can I use this shaft with my old ping eye 2 club head? If not, What can I use?

    Asked by: Doggoneit
    Yes, you can use the Recoil taper tip iron shaft with the Ping Eye 2 iron. The Ping Eye 2 irons take a .355 taper tip shaft.
    Answered by: GW2002
    Date published: 2017-02-16

    When will you have stock on the 5 and 6 iron regular flex shafts Thanks

    Asked by: Merv
    You will need to check with GolfWorks Canada to find out for sure. We ship to GolfWorks Canada on a regular basis and we just go these in stock here in the US. Hopefully they should have them soon but they can tell you for sure. http://www.golfworks.ca/contact-us/a/222/
    Answered by: JimY
    Date published: 2017-02-06

    Which flex is the F3.

    Asked by: Dg2917
    F3 stands for men's Regular Flex.
    Answered by: JimY
    Date published: 2017-02-06

    If I order a set of mizuno 900 irons with Recoil shafts. I'm I getting the real Recoil shaft or a cheaper mass produced version. Thanks

    Asked by: Chuckie
    To my knowledge in the case of the Recoil irons you should be getting the real deal. Depending on the model UST will make them with a .355" taper tip for Mizuno compared to most of the models we stock being a .370" parallel tip.
    Answered by: JimY
    Date published: 2017-02-10

    6,7,w reg flex says back ordered any timetable for these to come in?   Thanks Rod

    Asked by: Rod
    We are showing that they are due in the end of this week, 12/30/16.
    Answered by: JimY
    Date published: 2016-12-27
    • y_2017, m_9, d_25, h_3CST
    • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
    • cp_1, bvpage1
    • co_hasquestionsanswers, tq_46
    • loc_en_US, sid_US0085, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_golfworks