UST Mamiya Recoil 95 Taper Iron Shafts

UST Mamiya Recoil 95 Taper Iron Shafts


Recoil 95 #2 Iron, R Flex - 355" tip 41.0" (93g) 3B1M -
$44.99
In Stock
Recoil 95 #3 Iron, R Flex - 355" tip 40.5" (93g) 3B1M -
$44.99
In Stock
Recoil 95 #4 Iron, R Flex - 355" tip 40.0" (93g) 3B1M -
$44.99
In Stock
Recoil 95 #5 Iron, R Flex - 355" tip 39.5" (93g) 3B1M -
$44.99
In Stock
Recoil 95 #6 Iron, R Flex - 355" tip 39.0" (93g) 3B1M -
$44.99
In Stock
Recoil 95 #7 Iron, R Flex - 355" tip 38.5" (93g) 3B1M -
$44.99
In Stock
Recoil 95 #8 Iron, R Flex - 355" tip 38.0" (93g) 3B1M -
$44.99
In Stock
Recoil 95 #9 Iron, R Flex - 355" tip 37.5" (93g) 3B1M -
$44.99
In Stock
Recoil 95 Wedge, R Flex - 355" tip 37.0" (93g) 3B1M -
$44.99
Backordered
Recoil 95 #2 iron, S Flex - 355" tip 41.0" (93g) 4B1M -
$44.99
In Stock
Recoil 95 #3 Iron, S Flex - 355" tip 40.5" (93g) 4B1M -
$44.99
In Stock
Recoil 95 #4 Iron, S Flex - 355" tip 40.0" (93g) 4B1M -
$44.99
In Stock
Recoil 95 #5 Iron, S Flex - 355" tip 39.5" (93g) 4B1M -
$44.99
In Stock
Recoil 95 #6 Iron, S Flex - 355" tip 39.0" (93g) 4B1M -
$44.99
In Stock
Recoil 95 #7 Iron, S Flex - 355" tip 38.5" (93g) 4B1M -
$44.99
In Stock
Recoil 95 #8 Iron, S Flex - 355" tip 38.0" (93g) 4B1M -
$44.99
In Stock
Recoil 95 #9 Iron, S Flex - 355" tip 37.5" (93g) 4B1M -
$44.99
In Stock
Recoil 95 Wedge, S Flex - 355" tip 37.0" (93g) 4B1M -
$44.99
In Stock
Recoil 95 #3 Iron, X Flex - 355" tip 40.5" (93g) 5B1M -
$44.99
In Stock
Recoil 95 #6 Iron, X Flex - 355" tip 39.0" (93g) 5B1M -
$44.99
In Stock
Recoil 95 #8 Iron, X Flex - 355" tip 38.0" (93g) 5B1M -
$44.99
In Stock
Recoil 95 #9 Iron, X Flex - 355" tip 37.5" (93g) 5B1M -
$44.99
In Stock
Recoil 95 Wedge, X Flex - 355" tip 37.0" (93g) 5B1M -
$44.99
In Stock
Pureing 
1-3 $19.50
4+ $17.50
Tip & Butt Trimming
$4.95
Tip Prepping
$2.95

UST Mamiya Recoil 95 Taper Iron Shafts

Finally, a revolutionary technology that will change how you think about iron shafts. UST Mamiya’s new recoil iron shafts are a game changer. In the past, heavy weight graphite iron shafts felt dead and stiff. With UST Mamiya’s exclusive recoil™ technology, we have brought feel back into the shaft, while allowing players to hit a wide range of shots that result in better distance control and pin seeking accuracy.

By positioning over 19 different layers within the shaft, we were able to create a design that outperforms the best steel shafts in the market.

  • Lightest weight option in a .355 taper tip.
  • Designed to produce efficient energy transfer for increased ball velocity and greater distance. 67% more efficient than steel.
  • Recoil™ 95 produces a medium ball flight.
  • Trimming Instructions

    UST Recoil Graphite Iron Shaft Specifications

    Not Found.

    Do I need to use shims to install these shafts on Callaway apex pro 16 irons?

    Asked by: Weatherman2112
    The Callaway Pro Apex irons have a.355 hosel bore and the US0085 shafts are a .355 tip diameter shaft, so you do not need shims for installation.
    Answered by: GW2002
    Date published: 2017-03-23

    Can I use this shaft with my old ping eye 2 club head? If not, What can I use?

    Asked by: Doggoneit
    Yes, you can use the Recoil taper tip iron shaft with the Ping Eye 2 iron. The Ping Eye 2 irons take a .355 taper tip shaft.
    Answered by: GW2002
    Date published: 2017-02-16

    When will you have stock on the 5 and 6 iron regular flex shafts Thanks

    Asked by: Merv
    You will need to check with GolfWorks Canada to find out for sure. We ship to GolfWorks Canada on a regular basis and we just go these in stock here in the US. Hopefully they should have them soon but they can tell you for sure. http://www.golfworks.ca/contact-us/a/222/
    Answered by: JimY
    Date published: 2017-02-06

    Which flex is the F3.

    Asked by: Dg2917
    F3 stands for men's Regular Flex.
    Answered by: JimY
    Date published: 2017-02-06

    If I order a set of mizuno 900 irons with Recoil shafts. I'm I getting the real Recoil shaft or a cheaper mass produced version. Thanks

    Asked by: Chuckie
    To my knowledge in the case of the Recoil irons you should be getting the real deal. Depending on the model UST will make them with a .355" taper tip for Mizuno compared to most of the models we stock being a .370" parallel tip.
    Answered by: JimY
    Date published: 2017-02-10

    6,7,w reg flex says back ordered any timetable for these to come in?   Thanks Rod

    Asked by: Rod
    We are showing that they are due in the end of this week, 12/30/16.
    Answered by: JimY
    Date published: 2016-12-27

    I usually use A shafts. I have a set of Titleist AP2 714 irons I would like to re-shaft with Recoil 95. If I shaft 5 iron with 3 iron taper and continue soft step through wedge would that be equivalent. I need to know before ordering. Thanks

    Asked by: Chuck
    Soft stepping 2 clubs like this should get you pretty close to an A flex with the Recoil 95 R flex shafts. It could work well.
    Answered by: JimY
    Date published: 2016-12-22

    Are the Recoil 95 .370 (parallel not taper) shafts which are special ordered from UST Mamiya discrete length shafts or a single 41 inch length? If they are, is it possible to estimate how long it would take to special order the shafts from UST? Thanks.

    Asked by: Caesar
    The Recoil 95 iron shafts are only made with a .355" taper tip discrete length and are not available at all with a .370" parallel tip. To install these shafts into a .370" hosel bore you would need to use a shim to make the shaft fit properly. Our SHIMT works well for this assembly. http://www.golfworks.com/the-golfworks-brass-adaptor-shims/p/SHIM/
    Answered by: JimY
    Date published: 2016-12-13
    • y_2017, m_5, d_25, h_1CST
    • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
    • cp_1, bvpage1
    • co_hasquestionsanswers, tq_44
    • loc_en_US, sid_US0085, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_golfworks