Value Line Golf Club Bending Machine

Value Line Golf Club Bending Machine


Value Line Golf Club Machine
$149.99
In Stock
Putter Leveling Block
$29.99
In Stock
Brass Hosel Protectors - Pair
$1.99
In Stock

Value Line Golf Club Bending Machine

Our Value Line Golf Club Machine bends the loft and lie angles of irons and putters. It offers many of the features of the Maltby Design® Golf Club Machine at a lower price.

  • Bending bar included
  • Optional Brass Hosel Protector aids in protecting from marring (BHP)
  • Putter Leveling Block included
  • Vise mounted (Vise not included)

    Please Note: Additional shipping charges may be required due to weight.
  • Value Line Golf Club Bending Machine is rated 4.4 out of 5 by 17.
    Rated 5 out of 5 by from Good Personal Use Option Just finished going through two forged iron sets and a few putters and got the job done. I use a seperate gauge set so this setup requires a fair amount of going back and forth and patience. If you are not a handyman type of person, this could be very frustrating. But once you get the hang of it and get a feel for the bending process, it will get you where you want to go. Well built and I use it in a large vise on a tool stand I modified for this. Still can move around in the vise but I deal with it. Would not recommend for higher use situations.
    Date published: 2016-10-10
    Rated 5 out of 5 by from It's worth the money I gave this product 5 stars because it's a solid tool that allows you to bend irons. It's a good buy for someone who wants to adjust lie or loft of his own irons, or a friend's, and is patient. There is no device with this machine that gives you your starting point(s) for loft or lie, so you need a way to measure the club before you bend it. I didn't care how many degrees I was flat or upright; I just wanted to bend the irons to meet a more comfortable stance. Later I bought Golfworks' protector just to see where things were, which turned out useful because several irons I thought I'd bent had not, in reality, been changed at all. The machine secures the iron well, and the rod that comes with it is fine for bending the hosel. But-- YOU WILL WANT TO USE THE BRASS SLEEVES THAT ARE SOLD SEPARATELY, unless having marks on your hosels doesn't matter to you (it doesn't to me). For putters, follow the instructions to the letter to protect the top edge from being dented. Also, use those brass sleeves.
    Date published: 2015-12-26
    Rated 5 out of 5 by from GREAT HOME CLUB TOOL! I ordered this for my own home use and it has worked really well for me. It is robust(I tore a 27-4 stainless 7 iron hosel with no damage to it) If you secure the club properly you will not damage this machine in normal use. The gauges are accurate and easy to read. I mounted it to a heavy wooden bench but it would be better to have the stand.
    Date published: 2012-06-05
    Rated 5 out of 5 by from AWESOME!!!! THE BEST MONEY EVER SPENT ON GOLF! THIS PRODUCT WORKS WELL WITHOUT SPENDING $600.
    Date published: 2007-06-22
    Rated 5 out of 5 by from Easy to use I love this product built a mount for a trailer hitch and can adjust measure and try at the range. Make sure if you do try this make sure it's warm out so the metal on the clubs are not as brittle.
    Date published: 2017-04-04
    Rated 2 out of 5 by from OK for the price, but can damage clubs I bought this machine a few months ago. The clamping system is not the greatest and after a few adjustments, the clamps began to damage clubs. They do sell non marring clamps and for the life of me I don't know why they don't sell them with the machine. Same thing for the bending bar, which leaves marks on the hozel, unless you buy the non-marring one.
    Date published: 2017-06-09
    Rated 5 out of 5 by from GREAT HOME CLUB TOOL! I ordered this for my own home use and it has worked really well for me. It is robust(I tore a 27-4 stainless 7 iron hosel with no damage to it) If you secure the club properly you will not damage this machine in normal use. The gauges are accurate and easy to read. I mounted it to a heavy wooden bench but it would be better to have the stand.
    Date published: 2012-06-05
    Rated 5 out of 5 by from Awsome Tool As advertised, installed new TT Lite shafts and changed lengths. When I checked the lies, they were all off by different amounts. This bending machine got them all perfect. Took a few minutes to get it going. Make sure it's secure on a non movable table and FOLLOW directions. Hitting them straighter and loving it. Thanks.
    Date published: 2016-11-10
    • y_2017, m_10, d_16, h_19
    • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_17
    • loc_en_US, sid_VAM, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
    • clientName_golfworks

    Have very old bending machine. Knob for setting upper block has stripped. Can I get a new one?

    Asked by: Robert A
    We do manufacture the VAM here at The GolfWorks so you can call Customer Service at 1-800-848-8358 and they can help you with an order for the replacement part you need.
    Answered by: JimY
    Date published: 2017-10-09

    could I bend a set of pingeye 2 golf cubs with this so there stronger as 8 into a 6 a nd so forth could I bend hybreds so there stronger?

    Asked by: sacky
    No, you would not be able to bend Ping Eye 2 irons changing an 8 iron to a 6 iron loft with this bending machine. It is not likely that you would bend the Ping Eye 2 irons that much with any bending machine. The VAM does not bend hybrid and again you will not likely bend hybrids two clubs stronger for loft with any bending machine. We would not recommend trying to bend these clubs that much.
    Answered by: JimY
    Date published: 2017-10-09

    Which Bending Bar does this come with?

    Asked by: GROD
    The VAM comes with the GW1036 Short Hosel Bending Bar.
    Answered by: JimY
    Date published: 2017-10-09

    Does this come with any measuring gauges

    Asked by: Joe
    No the VAM does not come with any measuring gauges. Those would have to be purchased separately. You would need a gauge like the Value Line Golf Club Gauge (HGCG) to properly measure the loft and lie angles. https://www.golfworks.com/value-line-golf-club-measuring-gauge/p/HGCG/
    Answered by: JimY
    Date published: 2017-09-06

    is there a protractor on this machine to get degrees and angles if not what is the part number for what you recomend

    Asked by: msummer2
    No, the VAM does not have any protractor or gauges attached for measuring loft and lie. You would need a gauge like the HGCG Value Line Golf Club Gauge to properly measure the loft and lie. https://www.golfworks.com/value-line-golf-club-measuring-gauge/p/HGCG/ https://www.golfworks.com/images/art/HGCG.pdf
    Answered by: JimY
    Date published: 2017-09-05

    Is the bending bar included with this product? (Value linebending machine)

    Asked by: Brian
    Yes the bending bar is included with the VAM bending machine. At this link if you scroll down the page you will see the description and what items are included with this machine. https://www.golfworks.com/value-line-golf-club-bending-machine/p/VAM/
    Answered by: JimY
    Date published: 2017-07-24

    Do you sell a non-marring clamp kit for this bending machine?

    Asked by: GLK
    No we do not have offer a non-maring clamp kit for the VAM bending machine.
    Answered by: JimY
    Date published: 2017-07-17

    I have read through the manual, and i feel like I have a pretty good handle of how the machine works. Do you know of any videos that show the machine in use? I want to make sure I have everything down before I try to bend my clubs. A video would be Great!

    Asked by: JCB2222
    No, we never made a video for the VAM. If you have any questions I will be glad to help you. You can contact me at jyachinich@golfworks.com or by calling the 1-800-848-8358 and asking for Jim Yachinich.
    Answered by: JimY
    Date published: 2017-07-07
    • y_2017, m_10, d_16, h_19CST
    • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
    • cp_1, bvpage1
    • co_hasquestionsanswers, tq_69
    • loc_en_US, sid_VAM, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_golfworks