Odyssey Double Bend Replacement Putter Shafts

Odyssey Double Bend Replacement Putter Shafts

Odyssey - 37in Double Bend - 370 tip (110g)
In Stock
Odyssey - 50in Double Bend - 370 tip (171g)
In Stock
Tip & Butt Trimming
Tip Prepping

Odyssey Double Bend Replacement Putter Shafts

Odyssey Double Bend Replacement steel putter shafts for putters 37" or 50" in length.

  • .370" tip diameter

Trimming Instructions

Odyssey Replacement Golf Putter Shaft

Odyssey Double Bend Replacement Putter Shafts is rated 5.0 out of 5 by 2.
Rated 5 out of 5 by from Odyssey Two Ball Shaft Needed to re-shaft an Odyssey White Hot Two Ball putter. This is due to my arms being to long for my height. That required a shorter shaft length. Just cutting the original shaft put the grip to far into the taper of the shaft. This solved my problem. They shipped the shaft fast and in a strong box. Would recommend.
Date published: 2016-09-28
Rated 5 out of 5 by from Original Specs Replacement shaft matches the original bends in my 2-ball putter.
Date published: 2016-01-12
  • y_2016, m_12, d_7, h_16
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_2
  • loc_en_US, sid_TT204102, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

Will this fit a Taylor Made Rossa Monza Spider vincini heel mount

Asked by: Mike
No the Odyssey double bend putter shaft will not fit the TM Monza Spider Vincini heel shafted putter. Odyssey does not use a 90 degree hosel bore or post so this shaft is only for Odyssey putters. You would need a double bend shaft like the TT1002P. 3/8" is the most common amount of offset used by the manufactures on these putters. http://www.golfworks.com/rh-1-4-offset-double-bend-putter-shaft/p/TT1001P/
Answered by: JimY
Date published: 2016-12-05

Is this the correct shaft to replace the stock shaft in an Odyssey Tank Cruiser #7? Also, is this stepped or stepless? Thank you!

Asked by: Barry
This is a stepless fluted shaft.
Answered by: JimY
Date published: 2016-11-29

Hello all: I am looking for the proper replacement shaft for a taylormade ghost manta heel shafted putter. Have gone thru a few shafts and still not the right one. Please help.

Asked by: dean
In looking at pictures it should be the TT1002P Double Bend shaft with 3/8" offset.
Answered by: JimY
Date published: 2016-11-21

will this work in an Odyssey #5 Dual Force 2?

Asked by: MrDave
Yes the Odyssey TT204102 putter shaft is the replacement for the #5 Dual Force 2 putter.
Answered by: JimY
Date published: 2016-11-07

I just bought a really nice used Odyssey Trihot #1 putter.  This is the mallet Rossie style and was hoping this shaft would work.  The shaft on the club is only 32" in length and I don't want to add a 2 inch extender.

Asked by: pforward2016
Yes the TT204102 shaft is the replacement shaft for this Odyssey putter.
Answered by: JimY
Date published: 2016-10-31

I want to reduce the full-shaft offset on a Rossie White Hot Pro. Will this shaft reduce the offset to 1/4 shaft, but without effecting the face balance, lie angle, etc.?

Asked by: BILCMVP
This shaft is set up as a replacement to the stock Odyssey shafts so it should create the same amount of offset that you have with the stock shaft. We would have to do a custom bend shaft to to create less offset. To do that we would require you to send in the putter head so that we make sure the shaft sets up correctly.
Answered by: JimY
Date published: 2016-10-24

Will the double bend shaft work on an odyssey backstryke sabretooth putter ? And also do you ship to the UK ? 

Asked by: Craigmac
Yes this will work with the Backstryke Sabretooth putter. Yes we do ship to the UK. You can contact our International Trade Accounts Manager, Donna Ours, at dours@golfworks.com and she will be glad to help you.
Answered by: JimY
Date published: 2016-10-18

The 37 inch shaft and its stated weight is 110 grams. I am trying to compare that to buying the 50 inch shaft and cutting it to 37 inches. I was wonder if the 50 inch cut to 37 would have less flex and if there would be a difference in the weight 

Asked by: jeff
The 50" shaft cut to 37" would still be stiffer then starting with the 37" shaft because it is heavier and more then likely the shaft diameter will still be bigger then the 37" stock shaft, which also makes it stiffer.
Answered by: JimY
Date published: 2016-10-14
  • 2016-12-08T07:55CST
  • bvseo_cps, prod_bvqa, vn_cps_3.4.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_77
  • loc_en_US, sid_TT204102, PRD, sort_recentAnswersFirst
  • clientName_golfworks