The GolfWorks R1 Shaft Adaptor Sleeve

The GolfWorks R1 Shaft Adaptor Sleeve

TM R1 RH .335" Shaft Adaptor Sleeve, 1.5 Degree Offset-
In Stock

The GolfWorks R1 Shaft Adaptor Sleeve

The GolfWorks R1 Shaft Adaptor Sleeve is rated 1.0 out of 5 by 1.
Rated 1 out of 5 by from TOO Heavy and Tight Fit When I first received this I immediately could tell the difference in weight comparing the original TM sleeve. I decided to weigh it and sure enough, it weighed 3.7 grams more than the original sleeve adaptor. Which will increase swing weight. I tried to dry fit the sleeve onto a .335 pre-prepped shaft and it only went on half way. It did not fit. I checked the inside diameter and found that it was .337 part way and decreased to .334 towards the bottom of the adaptor hole. Maybe I received a defective sleeve but not what I would expect from Golfworks.
Date published: 2013-08-26
  • 2016-10-26T08:01CST
  • bvseo_cps, prod_bvrr, vn_cps_3.4.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_US, sid_BB9054, PRD, sort_relevancy
  • clientName_golfworks

I read that the R1 adapter fits the Adams XTD driver.  Is thtrue?rue

Asked by: Bill
Not from the information that I have. The TM0023 shaft adaptor for the R-15,SLDR, M1 and M2 will fit the Adams XTD, from what Taylor Made told me. The R1 adapter will not fit the R-15, SLDR, M1 and M2 drivers.
Answered by: JimY
Date published: 2016-08-01

Is this an all metal sleeve that can be re-used?

Asked by: Craig
Yes this adapter is all metal and can be reused.
Answered by: JimY
Date published: 2016-07-05

Do you sell R1 tip size 350 instead of 335?

Asked by: James E
We carry only the .335 in this adaptor.
Answered by: Brent Dill
Date published: 2016-05-05

I noticed just before i ordered that this adaptor is for right hand clubs. Is there an adaptor available for left hand, or can the right hand adaptor be used and if so what would the ramifications be? I assume it might have something to do with the offset

Asked by: Bob
No we do not have the BB9054 adaptor in Left hand. This right hand adaptor will work in the left hand club but the readings will all be opposite.
Answered by: JimY
Date published: 2016-02-22

does the R1 fiting work with the M1 head? Thank you for your help!

Asked by: DSurfL
Yes the R1 adaptor is suppose to fit the M1 head.
Answered by: JimY
Date published: 2016-02-22
  • 2016-10-26T08:04CST
  • bvseo_cps, prod_bvqa, vn_cps_3.4.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_5
  • loc_en_US, sid_BB9054, PRD, sort_recentAnswersFirst
  • clientName_golfworks