High Density Tungsten Powder

High Density Tungsten Powder


High Density Tungsten Powder - 1/4 lb.
$22.99
In Stock

High Density Tungsten Powder

A safe, economical alternative to lead powder, The GolfWorks tungsten powder is now available in std. density which is similar to that of lead powder and also in 99% pure high density Tungsten Powder which is over 30% heavier than the highest density lead powder and due to the powdery textures ability for compression, can add more weight in less space.

High Density Tungsten Powder is rated 5.0 out of 5 by 5.
Rated 5 out of 5 by from Tungsten Powder Excellent stuff. Higher weight per volume than lead and safer too. Easy to work with when you pour down the shaft using a funnel and the grip saver tool. Comes with a nifty measuring spoon as well to make it easy. I swing weighted my set of Beryllium Copper Ping Eye 2's from C8 to D2 . This quarter pound container only got me through 4 clubs. Get the larger size if you intend to do your whole set.
Date published: 2015-10-02
Rated 5 out of 5 by from Works great. This is much better than lead powder or weights. Easy to use. There is enough in the jar for many sets of clubs.
Date published: 2015-09-26
Rated 5 out of 5 by from Great Product! I love this tungsten powder product, because I can more weight with so little amount.
Date published: 2015-06-07
Rated 5 out of 5 by from stuff works Works well a little bit goes a long way. Became full when opening the first time.
Date published: 2015-07-08
Rated 5 out of 5 by from Must have This is a must-have for swing weighting golf clubs
Date published: 2016-03-15
  • 2016-07-24T07:49CST
  • bvseo_cps, prod_bvrr, vn_cps_3.3.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_5
  • loc_en_US, sid_HDTP, PRD, sort_relevancy
  • clientName_golfworks

What do you do to keep the powder from moving when the club head is up in the bag?

Asked by: Craiger
If you are putting powder down inside the shaft we hold it in place with a cork that if forced down inside the shaft on top of the powder. http://www.golfworks.com/swingweight-shaft-corks/p/CI/ http://www.golfworks.com/the-golfworks-44-1-2-ram-rod/p/RR/ http://www.golfworks.com/heavy-duty-44-1-2-ram-rod/p/RR7/
Answered by: JimY
Date published: 2016-07-18

When pouring tungsten powder down the shaft to adjust swing weight, is the change in CG enough to change the MPF significantly?

Asked by: CHS
It depends on how much weight you are adding. Weight added inside the shaft that extends above the top of the hosel begins to significantly change the clubs CG. Weight that stays below the top of hosel will not effect CG that much assuming a normal length hosel.
Answered by: JimY
Date published: 2016-06-20

Can you tell me the particle size. It is usually given in micrometers.

Asked by: DavidL
Our vendor tells me the particle size is approximately 5 to 7.5 micrometers.
Answered by: JimY
Date published: 2015-12-03

Is this as good a solution as taking shaft off current head and adding a tip weight

Asked by: Jc007
It certainly can be but we do caution with graphite shafts to try and keep and weight on the inside tip of the shaft below the top edge of the clubs hosel. Weight above the top edge of the hosel can create a shear point that could cause shaft breakage. The Grip Saver is another tool that can work well with this method because it keeps you from having to remove the grips to add the weight. http://www.golfworks.com/product.asp_Q_pn_E_SAVER
Answered by: JimY
Date published: 2015-01-06
  • 2016-07-24T07:52CST
  • bvseo_cps, prod_bvqa, vn_cps_3.3.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_4
  • loc_en_US, sid_HDTP, PRD, sort_recentAnswersFirst
  • clientName_golfworks