Ping Anser & I-20 .355" Iron Ferrules

Ping Anser & I-20 .355" Iron Ferrules

Ping Anser & I-20 Ferrule - .355"
In Stock

Ping Anser & I-20 .355" Iron Ferrules

This ferrule was specifically designed for reshafting Ping I-20 irons requiring a 3/8" counter bore. Fits .355" tapered shafts.

Ping Anser & I-20 .355" Iron Ferrules is rated 4.2 out of 5 by 5.
Rated 4 out of 5 by from works well Ferrule works well to take the slack out of the neck of the hosel. But the PRICE, come on let be realistic!
Date published: 2015-11-02
Rated 5 out of 5 by from Great product. I bought these to re-shaft a set of Ping S55 irons. They were a perfect fit, requiring no sanding.
Date published: 2016-01-15
Rated 3 out of 5 by from Good product but overpriced Product is fine but way overpriced. Shipping was 6.99 for 8 ferrules. $15= 8 ferrules...
Date published: 2016-02-06
Rated 5 out of 5 by from Perfection Great to be able to add these to my inventory of repair supplys
Date published: 2015-06-27
Rated 4 out of 5 by from FERRULLS Great buy they look good on my re-ferbished clubs thanks
Date published: 2015-11-01
  • 2016-07-24T07:49CST
  • bvseo_cps, prod_bvrr, vn_cps_3.3.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_5
  • loc_en_US, sid_BB9047, PRD, sort_relevancy
  • clientName_golfworks

Will these work with the Ping I - E1 irons? 

Asked by: Jerry
Yes these should fit the Ping I - E1 irons.
Answered by: JimY
Date published: 2016-07-05

Regarding the bottom portion of ferrule w/ hole, what is the purpose of the hole on the ferrule and is the bottom portion ferrule fitted into the club hosel?

Asked by: HuckGin
Epoxy will go through the hole and help bond the ferrule to the inside of the hosel better. if they do not bond properly they can actually make a squeaking noise.
Answered by: JimY
Date published: 2016-06-24

Will this fit the new G iron?

Asked by: Toolman
Yes it should fit the new Ping G irons.
Answered by: JimY
Date published: 2016-04-11

Will this ferrule work on a stock ping g30 .355 taper tip hybrid shaft. If not what ferrule is recommended. Thank you!

Asked by: djw
I do not know for sure but I would expect this ferrule to also work with the Ping G30 hybrid.
Answered by: JimY
Date published: 2016-02-29

What ferrule do I order to re-shaft a Ping Glide wedge .355Taper Tip

Asked by: ron1026
Any .355" ferrule will work with the Ping Glide wedge. You can choose from any of these options:
Answered by: Admin
Date published: 2015-06-22

Do these ferrules fit the PING I25 Irons

Asked by: Gargoyle
I would expect them to work with the I25 irons as well.
Answered by: JimY
Date published: 2015-02-24

hi there could u help me .? do the ping anser& i20 .355 iron ferrules fit the new s55 as a like for like iron replacement too.thank guy

Asked by: guy webster
This ferrule should fit the S55 as well.
Answered by: JimY
Date published: 2015-01-29

I have Ping Anser wedges, I also have .355 USTMamiya Recoil shafts that I could put in them.  Will this adapter enable me to do that???

Asked by: Rick Leton
Ping does not use the Collared ferrules with their irons. You could use a .355" ferrule such as the 66TI, 67TI, 75TI or 76PI. Most of the time with .355" taper tip shafts I will use .370" ferrules and they work just fine. A .355" taper tip shaft will have tapered out to approximately .370" where the shaft exits the top of the hosel and the .370" ferrule will fit fine. The 74PI looks similar to the size that Ping installs from the factory.
Answered by: JimY
Date published: 2014-12-08
  • 2016-07-24T07:51CST
  • bvseo_cps, prod_bvqa, vn_cps_3.3.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_10
  • loc_en_US, sid_BB9047, PRD, sort_recentAnswersFirst
  • clientName_golfworks