1" x 42" Professional Sanding Machine

1" x 42" Professional Sanding Machine


Professional Belt Sanding Machine -
$269.99
In Stock
Deluxe Ferrule Turning Arm -
$39.99
In Stock
Economy Ferrule Turning Arm -
$19.99
In Stock
Replacement Flap Wheel for GW1105
$5.99
In Stock

1" x 42" Professional Sanding Machine

The Updated Professional Belt Sanding Machine offers a greater value and better construction than last years model. It is designed especially for golf repair and clubmaking shop operations. This 1"x42" belt model is ideal for turning ferrules and roughing shaft tips. A professional grade sander, made from heavy gauge steel with a steel base and suction cups to keep it in place during operation. It has 1/2" arbors and comes with a 1/3 hp, 1,725 rpm, 6.2 amp electric motor wired with a plug for a standard outlet. Medium sanding belts are included.

Please Note: Additional shipping charges required due to weight.
AccessDeniedAccess Denied7B5EE839A153D656SJO18qjHsQ490UtmRiay/wy1BneFUKADvV7e3cDHTn5pZFartmdhbbSPcJFc304HFD05aPz0alo=

Jim: Where can I get fuses for this machine. The blown fuse says: 8A/250Volt but I do not know if it is slow blow, fast acting or time delay???? I have tried 10 different stores in the Tucson AZ area and nobody has anything close???

Asked by: Grinsatgolf
Actually we have some replacement fuses for this machine. If you are getting ready to place an order we could include one in an order for you or I would be glad to put it in an envelope and mail it to you. You can send your full mailing address to my email at jyachinich@golfworks.com
Answered by: JimY
Date published: 2016-05-03

What is the arbor size for the flap wheel?

Asked by: DpgIII
There is no arbor with the flap wheel. It has a post attached that measures .240" and the size of the flap wheel is listed as 80 x 25.
Answered by: JimY
Date published: 2016-04-28

I purchased the professional sanding machine as well as ttwo blue durabrite ferrule linens (1" by 42") bands. The bands thickness is binding at the front when I turn the unit on and burns the fuse almost immediately. The belts appear too thick. Help!!!

Asked by: rbrbuilt
If the belt is binding against the front work table you can adjust the work table to create a little more space. Under the work table there are 2 screws that you would loosen, slide the work table out and re tighten the screws.
Answered by: JimY
Date published: 2015-12-02

I purchased this machine and it came with 2 sanding belts. What is used for turning ferrules? The sanding belts ruin a ferrule.

Asked by: BobA9
The sanding belts that come with the belt sander are sanding and not for ferrule turning. I recommend you purchase the 1x42" DuraBrite belts for finishing ferrules. http://www.golfworks.com/product.asp?pn=GW1065&green=E4205EE0-1693-5C29-A1A6-42C933CD0CFA&utm_source=MyBuys&utm_medium=RSP&utm_campaign=WebRecUS
Answered by: Admin
Date published: 2015-05-07

I purchased this machine but did not receive any instructions. How to change belts, adjusting belt tension and truing the belt on the rollers are not obvious. A little instruction would be helpful.

Asked by: BobA91
Unfortunately, I don't see the instructions listed for this tool on our website. There is a large black lever on the left side of belt harness that you push downward and hold to release tension for belt replacement. To true the belt there is a small (1/8") Allen screw at the top of the belt harness. You can insert the included wrench and twist this screw back and forth to adjust the horizontal movement of the belt. If you have further questions please call our customer service at 800 848-8358 for more details.
Answered by: Admin
Date published: 2015-05-07

What is the flap wheel used for?

Asked by: BobA9
The flap wheel can be used to remove the finish on a graphite shaft before installation.
Answered by: JimY
Date published: 2015-05-06

Do you still carry the economy sander and cutoff whell machine?

Asked by: ajzino
We do still have the GW1105 Golfworks 1"X42" Professional Belt Sander. It is in stock.
Answered by: GW2002
Date published: 2014-10-23
  • 2016-07-28T07:54CST
  • bvseo_cps, prod_bvqa, vn_cps_3.3.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_7
  • loc_en_US, sid_GW1105, PRD, sort_recentAnswersFirst
  • clientName_golfworks