Pro Lever-Action Shaft Holder

Pro Lever-Action Shaft Holder

Pro Lever-Action Shaft Holder
In Stock

Pro Lever-Action Shaft Holder

Use the Pro Lever-Action for quick and secure clamping during regripping. Features a unique clamp that holds the shaft on three sides for added stability. Pro lever action designed to engage quickly and efficiently. Includes rubber pads to protect graphite shafts.
Pro Lever-Action Shaft Holder is rated 4.8 out of 5 by 5.
Rated 5 out of 5 by from Pro Lever-Action Shaft Holder - Excellent Choice I bought this holder about a month ago. I was using the standard rubber holder in a vise. The rubber holder was ok for irons, but you had to be careful with graphite shafts. I bought the holder and it was so simple to use for irons and graphite shafts. Nothing to put together. I like that it uses my existing vise. I don't have to commit an area to it. I can take it out and throw in the cabinet if necessary. What I like most about the shaft holder is the speed to secure a shaft, the guides and quick release. I would recommend this to anyone doing club repair.
Date published: 2016-03-03
Rated 5 out of 5 by from Great Golf Club Holder For Regripping Your Own Golf Clubs Excellent extra hand in holding your golf club while you cut off old grips , remove old grip tape , apply new grip tape , and sliding on new golf club grips. A must have for you do it yourself person a reasonable up front cost. Which I can use for a longtime and change many golf grips with it's aid.
Date published: 2011-09-15
Rated 5 out of 5 by from Excellent Tool Have replaced grips in past using a rubber sleeve that slipped over shaft then squeezed in vise to hold shaft. This is cheaper.. but takes time and you have to adjust vise on EACH shaft. Is it too tight or loose? No issue with the PL-ASH. Set in vise, Place shaft to re-grip in tool, lock in place and go to work. Once set , works on all shafts. Saves time and is much safer for the shaft and you. If you replace grips on your clubs, you need this tool... make the investment !!
Date published: 2015-10-28
Rated 4 out of 5 by from Shaft Holder customer review We have used this item to grip about 10,000 clubs so far. Works great! ** Dane
Date published: 2009-12-30
Rated 5 out of 5 by from Super equipment Super easy equipment to use. Very pleased with the equipment.
Date published: 2016-03-24
  • 2016-10-23T08:43CST
  • bvseo_cps, prod_bvrr, vn_cps_3.4.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_5
  • loc_en_US, sid_PASH, PRD, sort_relevancy
  • clientName_golfworks

Are replacement pads available for this clamp?

Asked by: SSS
Yes replacement pads are available. The ordering code is PASHP01 and I am told the cost is $10.95.
Answered by: JimY
Date published: 2016-02-05

Are replacement pads (both sides) available for this clamp?

Asked by: SSS
Yes replacement pads are available. The ordering code is PASHP01 and I am told the cost is $10.95.
Answered by: JimY
Date published: 2016-02-04

Is the clamp size adjustable so I can flow the club for spineing purposes?  (i.e. place the club WITH grip in securely).

Asked by: Marcus
It will adjust wide enough to clamp the butt end of the shaft but I have found that using the rubber clamps for flowing does not always work well. They tend to dampen the vibration cycle pretty quickly.
Answered by: JimY
Date published: 2015-05-11

Can this device be mounted to a bench instead of using a vise??

Asked by: Dazed and Confused
The mounting block is removable by taking out the two bolts at the bottom of the unit. Once the block is removed you will be able to mount direct to a bench.
Answered by: Mark Masters
Date published: 2014-12-16

Is it adjustable to hold the smaller part of a shaft near the tip end as opposed to the butt end of the club? If so how?

Asked by: dehoffe76
The PASH shaft clamp will not properly hold the tip end of a golf shaft. We do sell inexpensive rubber shaft clamps that (RSC) that can be used in a vise to safely clamp a golf shaft tip.
Answered by: The GolfWorks
Date published: 2014-08-29
  • 2016-10-23T08:38CST
  • bvseo_cps, prod_bvqa, vn_cps_3.4.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_5
  • loc_en_US, sid_PASH, PRD, sort_recentAnswersFirst
  • clientName_golfworks