Callaway Collared .370" Iron Ferrule

Callaway Collared .370" Iron Ferrule


Callaway Collared .370" Iron Ferrule
$0.89
In Stock

Callaway Collared .370" Iron Ferrule

Ferrule designed to fit modern Callaway irons and wedges with a .370" hosel diameter. The Callaway .370" Ferrule fits the following Callaway models.

  • X Hot Irons
  • X Hot Pro Irons
  • Razr XL Irons
  • Razr X Irons
  • X-24 Hot Irons
  • Diablo Forged Irons
  • Diablo Edge Irons
  • X Utility Prototype
Not Found.

How long is this ferrule, not including the collar section?

Asked by: DJM
The BB9050 Callaway ferrule is 1/2" long not including the collar.
Answered by: JimY
Date published: 2017-02-21

Would these for my taylormade speed blades? I changed shafts and ruined the collard ferrules. Thanks

Asked by: John55
Speedblades actually had a little red plastic piece that fit into the hosel and then they used a ferrule that snapped over this red piece. With the red plastic piece gone a collared ferrule will fit, at least the ones that we sell (BB0001). I do not think the Callaway collared ferrules will fit because the collar part is longer and will be to long for the counterbore in these Speedblade irons. http://www.golfworks.com/collared-golf-club-ferrules/p/BB0001/
Answered by: JimY
Date published: 2017-02-01

Hi, Is this the replacement ferrule for the apex cf16 combo irons? thanks

Asked by: willi4653
Yes this ferrule should also fit the Apex CF16 combo irons.
Answered by: JimY
Date published: 2016-12-19

Do these ferrules also fit the MacGregor MT irons or the Cobra AMP irons?

Asked by: Waterskichamp
The MacGregor irons may not have used a collared ferrule but the Cobra AMP irons do. I am not sure if this Callaway ferrule will fit the outside diameter of the Cobra AMP irons. For the MacGregor irons if they do not use a collared ferrule a ferrule like the 61PI would work. The BB0008 collared ferrule should will work with the AMP irons. http://www.golfworks.com/collared-golf-club-ferrules/p/BB0001/ http://www.golfworks.com/golf-club-iron-ferrules-black/p/60PI/
Answered by: JimY
Date published: 2016-10-19

I want to re-shaft my X22 tour irons with DG S300s. What shaft size and ferrule do I need?

Asked by: rwf1004
The X-22 Tour irons use a .355" taper tip shaft and the BB9051 ferrules should work with these. http://www.golfworks.com/callaway-collared-355-ferrule/p/BB9051/
Answered by: JimY
Date published: 2016-06-20

What size ferrules for hogan apex irons 

Asked by: Rick 61
The Hogan Apex irons use a .355" taper tip shaft and if this is an older set of Apex irons they would not use a collared ferrule. You could use a .370" ferrule with the .355" taper tip shafts because the .355" taper tip shafts taper out to approximately .370" where the shaft exits the top of the hosel. The .370" ferrules also tend to match closer to the outside diameter of the hosel.
Answered by: JimY
Date published: 2016-05-31

Apex Utility Irons are what size, 355 or 370?

Asked by: Beards
Jim Y, The OEM-Shaft-Replacement guide says the 2014 Apex Utility Iron is a 0.355" tip shaft, but it also says that a Recoil 660/680 can be used but the 660/680 is a 0.370" tip so which is correct?
Answered by: Beards
Date published: 2016-04-14

Would this be the correct size for Apex Utility Iron 18.? Is there a spec page that you can tell what irons have .355 tips and those that are .370?

Asked by: Beards
The Apex Utility Iron is a .355" taper tip shaft. You would want the BB9051. For future reference you can find this information at these links on our web site. http://www.golfworks.com/callaway-collared-355-ferrule/p/BB9051/ http://www.golfworks.com/oem-shaft-replacement-guide/a/376/ http://www.golfworks.com/images/art/Callaway.pdf
Answered by: JimY
Date published: 2016-04-04
  • y_2017, m_2, d_23, h_13CST
  • bvseo_bulk, prod_bvqa, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_12
  • loc_en_US, sid_BB9050, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks