Graphite Design G-Tech Graphite Iron Shafts

Graphite Design G-Tech Graphite Iron Shafts

L/A Flex - 370 tip (77g) 1/2D3M
In Stock
R/S Flex - 370 tip (80g) 3/4B2M
In Stock
1-3 $19.50
4+ $17.50
Tip & Butt Trimming
Tip Prepping

Graphite Design G-Tech Graphite Iron Shafts

The Graphite Design G-Tech graphite iron shaft has all the performance characteristics that today's golfer desires.

  • .370" tip diameter
  • Quality the world's best club makers have trusted for years
  • A distinguished look unique from the competition - Graphite Design engineering applied for golfers of all skill levels

Trimming Instructions

Graphite Design G-Tech Graphite Iron Shafts is rated 5.0 out of 5 by 2.
Rated 5 out of 5 by from Great, versatile shaft! Installed these shafts in a couple of hybrids for a few customers of mine. Very good results with no complaints. Being a combo shaft, I have used them in many combinations. Would highly recommend!
Date published: 2017-10-28
Rated 5 out of 5 by from Graphite design shafts Senior shafts went on Callaway pro driver with fantastic result. I ment to buy the senior shafts for my irons but got the colours mixed up got a good result but the regular shaft was not soft enough to give the result I was after
Date published: 2016-03-30
  • y_2018, m_1, d_19, h_5
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.6
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_2
  • loc_en_US, sid_GD0012, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

Combo flex 370 tip 41 length

Asked by: Reggie
Yes the G-Tech is a Combo flex .370" tip diameter shaft. At this link if you scroll down the page you will see the specifications for these shafts.
Answered by: JimY
Date published: 2017-12-05

Just bought a set of Gtech GD0012 for Irons. Trimming instruction to apply is IR20 for R Flex which calls that tips have to trimmed.from #4 to W. I am understanding instructions properly ? .

Asked by: Gaston
Yes you would do the tip trimming per IR20 and then you will cut the shafts from the butt end for your finished club lengths once they have been installed.
Answered by: JimY
Date published: 2017-02-10

What exactly is a Combo Flex ? 

Asked by: Wally
A combination flex shafts means it can be assembled to 2 different flexes. In the case of the G-Tech you have the L/A which can be trimmed to play as a Ladies flex (L) or Senior flex (A). You also have the R/S which could be assembled to a Regular flex (R) or Stiff flex (S) by following the recommended trimming instructions. Combination flex shafts were created initially for club repairmen so that they did not need to stock as much inventory to have a good replacement shaft when someone came in with a broken club. They could stock the R/S and not have to stock R flexes and S flexes. It lessened their inventory.
Answered by: JimY
Date published: 2017-04-25

Would this shaft work well with Taylor Made M2 irons? Since these are very strong. does this shaft have a low kick point to get the ball up. 5,6,7 are the hardest to get up with their strong lofts This could be for a senior?

Asked by: Eros451
The G-Tech is a mid kick point in the R flex and a low kick point in the A flex. You could also look at the Grafalloy ProCustom (TT201201) which is a low kick point shaft in both the A and R flex shafts. Like the G-Tech the ProCustom is also a very good inexpensive shaft. Both of these shafts will fit the M2 irons.
Answered by: JimY
Date published: 2016-11-10

Which shaft would you use to replace a Yonex boron LTB600 shaft?

Asked by: Dennis
With all your individual questions asking which shaft compares best to the Yonex Boron LTB600 shaft this Project X (TT0115) would be the closest. The Yonex shaft was in the mid 80 to low 90 gram weight range. It was designed for a mid low to low trajectory. The GD0036 Graphite Design G Series 83 gram could be a good choice as well.
Answered by: JimY
Date published: 2016-10-10

can I use this shaft with hybrid iron or what can I use for hybrid irons

Asked by: joebug44
You can use the shaft for a "Hybrid" or a Hybrid iron, as long as the hosel diameter of the clubhead is .370", which is the tip diameter of the shaft. Most hybrids have .370" inside hosel diamters, but some don't. You need to be sure the hosel diamter and the shaft tip match. The Golfworks
Answered by: GW2002
Date published: 2016-01-21
  • y_2018, m_1, d_19, h_5CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.6
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_6
  • loc_en_US, sid_GD0012, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks