Mitsubishi Rayon Kuro Kage Black 2nd Gen Iron Shafts

Mitsubishi Rayon Kuro Kage Black 2nd Gen Iron Shafts


70 A Flex - 42", .370" tip (73gm) 2B2M -
$24.99
In Stock
70 R Flex - 42", .370" tip (75gm) 3B1M -
$24.99
In Stock
70 S Flex - 42", .370" tip (75gm) 4B1M -
$24.99
In Stock
Pureing 
1-3 $19.50
4+ $17.50
Tip & Butt Trimming
$4.95
Tip Prepping
$2.95

Mitsubishi Rayon Kuro Kage Black 2nd Gen Iron Shafts

The KURO KAGE™ Black Iron shaft Series has a stable and versatile profile that is designed to match the performance characteristics of the KURO KAGE™ Black Wood and Hybrid shafts.

Trimming Instructions

Mitsubishi Rayon Kuro Kage Shaft Specifications

Mitsubishi Rayon Kuro Kage Black 2nd Gen Iron Shafts is rated 4.8 out of 5 by 10.
Rated 5 out of 5 by from My new favorite shaft Without the availability of the Xcaliber graphite iron shaft, I started testing other shafts of similar weight. Although the tip is firmer in the Kuro Kage, I am very happy with the performance of this shaft. They play about a half step more flexible according to my frequency measurements, but that is exactly what I want, personally. Very consistent too in terms of weight and bend profile across shafts.
Date published: 2017-08-05
Rated 5 out of 5 by from Sand Wedge Test I bought this shaft to try in my sand wedge since I had recently been fitted for a new set of irons with the same shaft. Switching from metal to graphite has made a big difference in my game and I am quite pleased with the results. A slightly different fell from metal, but the adjustment did not take long.
Date published: 2016-03-31
Rated 5 out of 5 by from Great price I bought this shaft to replace one that broke when I hit a hidden tree root. The price was right and it shipped very quickly. Due to some medical issues, I haven't been able to play since I repaired the club, but I have no doubt it will perform as well as the OEM shaft that broke.
Date published: 2015-11-15
Rated 5 out of 5 by from Worth the investment For a shaft advertised as mid flight the Ball flight is little higher than expected but all in all I like the feel and performance
Date published: 2017-10-01
Rated 5 out of 5 by from Good graphite shaft Had this put in a 4 iron to see how I would like a graphite shaft has good feel and control of ball flight
Date published: 2017-06-02
Rated 5 out of 5 by from Great shaft Awesome shaft. Person I made this club for from this shaft wants to redo all of his clubs with the shaft
Date published: 2016-06-21
Rated 4 out of 5 by from Price and performance I bought this shaft to replaced my 5 iron. It performs well. Over all I am happy the shaft.
Date published: 2017-09-13
Rated 5 out of 5 by from Good price & product As of 4/22 have nit received yet (back ordered). Have bought before.
Date published: 2016-04-22
  • y_2018, m_1, d_18, h_9
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.6
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_10
  • loc_en_US, sid_MR0046, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

what are trim codes for MR0046,MR0036,MR0045? These are not in the catalog I have.

Asked by: GBDunn
For the MR0046 the code is IR31. For the MR0036 the trim code W8. For the hybrid MR0045, tip trim 0 for a H1, 1/2" for H2, 1" for an H#, 1 1/2" for and H4, and 2" for an H5. After tip trimming, trim to final playing length from the butt.
Answered by: GW2002
Date published: 2018-01-12

Thinking of replacing my Ping G-15 Reg Iron Shafts . How would these work?

Asked by: Tom
The Kuro Kage Black iron shafts will not fit the Ping G-15 irons. The Ping irons use a .355" taper tip shaft and the Kuro Kage Black is only available in a .370" parallel tip. In .355" taper tip graphite shafts we stock them in the Aerotech Steel Fiber, UST Recoil and Paderson iron shafts.
Answered by: JimY
Date published: 2018-01-03

I’m looking to replace the steel shafts in my 2014 TaylorMade Tour Preferred Irons, 3 - PW. Will this particular shaft work? Will you prep the shafts and cut them for me?

Asked by: melfear59
No the Kuro Kage Black 2nd Gen iron shafts will not fit the Taylor Made Tour Preferred irons. Taylor Made uses a .355" taper tip shaft in the Tour Preferred irons and the Kuro Kage Black 2nd Gen is only available in a .370" parallel tip, which is to large to fit. We stock the Aerotech Steel Fiber, UST Recoil 65, 95, 110, 125, and the Paderson Kinetixx IMRT Kevlar 950 and Kinetixx TS-I Trajectory iron shafts in .355" taper tip. We can prep the shafts for you.
Answered by: JimY
Date published: 2017-12-11

I am using 7 of these shafts to re-shaft a set of Wishon Sterling SL irons to my 8 iron length.  Do I tip trim to the regular iron length (5, 6, 7, 8 etc.) then butt trim to the desired length?  Or do I trim all the shafts to 8 iron spec then butt trim?

Asked by: Gemorc
You would follow the 8 iron tip trimming for all the irons then butt trim.
Answered by: JimY
Date published: 2017-12-06

WILL THIS SHAFT REPLACE A TITLEST AP1 IRON SHAFT( ORIGINAL)

Asked by: SILVERFOX1
No, this Kuro Kage shaft will not fit the Titleist AP1 irons. The Kuro Kage shaft used by Titleist is made exclusively for Titleist and is a .355" taper tip shaft. The Kuro Kage Black 2nd Gen shaft that we sell is only available in a .370" parallel tip which is to large to fit the Titleist irons. To get the shaft used by Titleist you would have to send the club back to Titleist.
Answered by: JimY
Date published: 2017-11-20

Would these fit a XR16 hybrid. Stock shaft from callaway is the project XX graphite which is about 60 grams. Too light for my taste

Asked by: frankjones89
Yes the MR0045 Kuro Kage Black 2nd Gen Iron shafts will fit the XR16 Hybrids. We also have the MR0045 Kuro Kage Black 2nd Gen Hybrid shafts. https://www.golfworks.com/mitsubishi-rayon-kuro-kage-black-2nd-gen-hybrid-shafts/p/MR0045/
Answered by: JimY
Date published: 2017-11-20

I have Burner irons about 5 years old and need shafts for 3-7 iron and 9-PW.  What lengths and special adaptors are needed.  Had a Kuro Kage noir R shaft installed on my * iron but I want to install these myself.  Can you help me.

Asked by: RickO
The Kuro Kage Black 2nd Gen (MR0046) iron shafts will all come in a 42" length. You will need to follow the recommended tip trimming instructions to tip trim the shaft for each iron in your set. Once the shafts are installed you will then measure the clubs for your finished length and cut the shafts from the butt end of the shaft to these lengths. You will follow trim code IR31 on page 2 at this link from our web site. https://www.golfworks.com/images/art/shaft_trim_inst.pdf You will need ferrule and you can use the Taylor Made Universal ferrule (BB9071) https://www.golfworks.com/taylormade-universal-370-iron-ferrule/p/BB9071/ Here are some links form our web site with step by step photo instructions for club assembly. https://www.golfworks.com/images/art/2008HowToBuildClubs.pdf We do offer a shaft prep service where we cut and sand the shaft tips before we ship the shafts to you so all you have to do is install the shafts. You would check the tip and butt trimming box when you place your order or if you call Customer Service at 1-800-848-8358 they can help you with your order.
Answered by: JimY
Date published: 2017-11-01

Will they fit Nike sasqatch sumo irons 

Asked by: Matty t
Yes the Kuro Kage iron shafts will fit the Sasquatch Sumo Irons. These irons use a .370" parallel tip size shaft.
Answered by: JimY
Date published: 2017-10-23
  • y_2018, m_1, d_18, h_9CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.6
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_48
  • loc_en_US, sid_MR0046, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks