TaylorMade M1, R15 & SLDR Adaptor Ferrule

TaylorMade M1, R15 & SLDR Adaptor Ferrule


TaylorMade SLDR Ferrule - RH .335" and .350" -
$3.99
In Stock

TaylorMade M1, R15 & SLDR Adaptor Ferrule

This aftermarket TaylorMade M1, R15 and SLDR replacement ferrule will work for both .335" and .350" shaft tip diameters.

TaylorMade SLDR Adaptor Ferrule is rated 1.0 out of 5 by 1.
Rated 1 out of 5 by from Didn't work I purchased this along with a m1/m2 shaft adapter. The ferrule is too narrow to fit onto the adapter and cracked in half when I tried to install it.
Date published: 2017-02-21
  • y_2017, m_9, d_22, h_22
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_US, sid_BB9057, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

On this site..the TM0022 SLDR shaft adapter was correct for a hybrid. It's a 335. On initial inspection it seems correct, although it appears that it needs an added ferrule.A post said it was a 59PI, but that was for a 370. Pic seems right tho. Any help

Asked by: Kubrada
The TM0022 would use the BB9057 Adaptor Ferrule. There is no other ferrule that goes on top of the BB9057. The SLDR Rescue would use a .370" tip size shaft. If you have the original SLDR adaptor it would use a ferrule like the 59PI. The BB9057 Taylor Made collared ferrule would be the best replacement. https://www.golfworks.com/the-golfworks-taylormade-adaptor-ferrule/p/BB9097/
Answered by: JimY
Date published: 2017-07-10

Do you need a ferrule when you are putting an Adaptor on a shaft? Doesn't the adaptor already have a ferrule attached to it, so to speak?

Asked by: Dan
Correct a new shaft adaptor comes with the ferrule. For clubmaker's reshafting the existing adaptor the ferrules can become damaged so we offer replacement ferrules.
Answered by: JimY
Date published: 2017-07-10

Is this product available in left hand?

Asked by: Jason
No Taylor Made does not make the left hand available.
Answered by: JimY
Date published: 2016-09-20

The hosel on a taylormade 460 S slidr looks like it's got a resessed area. Wil I need this ferrel?

Asked by: WATTS
That didn't answer my question. There is no shaft adapter, no screw to tighten on sole. The SLDR S model look's like most heads but has a recessed area in the hosel.
Answered by: WATTS
Date published: 2016-06-08

Is this ferrule a size .335 or is it a .350. I know the listing says fits a .335 or .350, but I am looking for a .335 to reshaft my R15 driver.

Asked by: Jon
This ferrule fits both the .335" or .350" Taylor Made shaft adaptor. This is the ferrule that goes onto the R15 shaft adapter.
Answered by: JimY
Date published: 2016-05-17

Can I just orders .335 ferrule?

Asked by: Omi
You will find the standard wood ferrule at this link. http://www.golfworks.com/golf-club-wood-ferrules-black/p/60PW/
Answered by: JimY
Date published: 2016-05-16

Is this a .335 ferrule?

Asked by: Omi
No this is not a regular ferrule. This is a ferrule to go onto a Taylor Made shaft adaptor.
Answered by: JimY
Date published: 2016-05-16

will this work for M2 adaptor

Asked by: Dave
Yes the BB9057 will work with the M2 adaptor.
Answered by: JimY
Date published: 2016-05-03
  • y_2017, m_9, d_22, h_22CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_10
  • loc_en_US, sid_BB9057, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks