The GolfWorks Razr-Fit Shaft Adaptor

The GolfWorks Razr-Fit Shaft Adaptor

Razr Fit, X-Hot Shaft Adaptor - 2 Degree Offset - .335"
In Stock

The GolfWorks Razr-Fit Shaft Adaptor

This aftermarket Razr Fit and X-Hot shaft adaptor is precision milled and allows for an additional 1 degree face angle change vs. the factory Razr Fit shaft adaptor. Available in .335".


  • Callaway X Hot
  • Callaway Opti-Fit
  • Callaway Razr Fit
  • Callaway Razr Fit Xtreme

The GolfWorks Razr-Fit Shaft Adaptor is rated 5.0 out of 5 by 2.
Rated 5 out of 5 by from Works Bought three, used one so far, fits 335 shaft just fine, after prepping shaft tip, and got my old trusty Titleist Graphite Design YS6+ into the adapter, went to put it on Callaway Xtreme head, snug rubber o-ring needed some pushing, but got in there just fine!! Presto, works just fine, fits perfect, allows swaps between (for me) Aldila Trinity it came with, Prolite Red (for lower shots in wind) and now the YS6+ (butt backweighted it too, plus one inch) for distance and carry. got extra Callaway Xtreme driver head on Ebay. Tinkerer Heaven.
Date published: 2016-03-21
Rated 5 out of 5 by from works great I attached an Aldila NVS shaft that I pulled out of another driver and stuck it in my Callaway Razr Fit head. Took it to Fla for vacation and it works great.
Date published: 2015-03-09
  • y_2017, m_11, d_17, h_2
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_2
  • loc_en_US, sid_BB9049, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

Does this fit a left handed driver ?

Asked by: Bob
Yes the BB9049 will fit a left hand driver. The standard reading and 180 degrees from standard will read correctly but all the other readings will read opposite from the right hand readings.
Answered by: JimY
Date published: 2017-10-02

 I recently purchased an early RazrFit that only has the adjustment for closed,open and standard and now I have been told by my instructor that I need a different shaft.  Apparently we can no longer get the adaptor here in the UK. Does yours fit?  

Asked by: Bob
Yes the BB9049 is an aftermarket adaptor for the RazrFit driver. It should work well.
Answered by: JimY
Date published: 2017-10-02

If I put this adapter in the O2 position, how much does it change the loft and in which direction(increase or decrease)?

Asked by: DON333
If you set this adaptor in the O2 position you will decrease the loft by 2 degrees and open the face angle by 2 degrees.
Answered by: JimY
Date published: 2017-08-29

Is this the adapter that fits the calloway epic

Asked by: Coke10
No, for the Callaway Epic you need the CA0020 Callaway shaft adaptor.
Answered by: JimY
Date published: 2017-08-28

Will this work with the Callaway X Hot Pro?

Asked by: Carol65
Yes the BB9049 will fit the X Hot Pro.
Answered by: JimY
Date published: 2017-08-09

I want to reshaft a Razr Fit driver with a .335 shaft comparable to a Mitsubishi Fubuki Z50 Rflex. What shaft would you recommend ??

Asked by: Billygc
Based on your previous question on the Fubuki Z50 with the different color bands the Z50 (MR0048) that we have would still be the closest match to the one you have even if there are minor difference in the flex and torque. You could also look at the Kuro Kage Black w/TiNi 50 (MR0064) as a possible replacement.
Answered by: JimY
Date published: 2017-08-01

Does this fit the driver and 3 wood?

Asked by: wwclark6135
The BB9049 is designed for the driver only.
Answered by: GW2002
Date published: 2017-06-16

I have a shaft in the mini 1.5 head will the shaft adapter  for that head fit The razr fit

Asked by: Jake
The Mini 1.5 head uses the Opti-Fit (CA0020) shaft adaptor and it will not fit the Razr Fit clubhead. You would need to install the shaft from the Mini not this BB9049 shaft adaptor to work with the Razr Fit.
Answered by: JimY
Date published: 2017-02-13
  • y_2017, m_11, d_17, h_2CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_29
  • loc_en_US, sid_BB9049, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks