Tour Lock Pro Weights

Tour Lock Pro Weights


Tour Lock Pro 8 Gram Weight
$5.99
In Stock
Tour Lock Pro 12 Gram Weight
$6.49
In Stock
Tour Lock Pro 16 Gram Weight
$6.99
In Stock
Tour Lock Pro 20 Gram Weight
$7.99
In Stock
Tour Lock Pro 30 Gram Weight
$8.49
In Stock
Tour Lock Pro 40 Gram Weight
$8.99
In Stock
Tour Lock Pro 50 Gram Weight
$9.99
In Stock
Tour Lock Pro 60 Gram Weight
$11.99
In Stock
Tour Lock Pro 80 Gram Weight
$13.99
In Stock
Tour Lcck Pro 100 Gram Weight
$14.99
In Stock
Grip Modifier
$19.99
In Stock
TLP 3/16" Wrench
$1.00
In Stock

Tour Lock Pro Weights

Tour Lock Pro is a revolutionary weighting technology that allows every golfer to fine tune, personalize and enhance the performance of any golf club.

Testing shows that optimizing the weight of a club produces a more consistent, tighter ball contact dispersion with the clubface, raising the “power transfer ratio” resulting in greater distance, improved accuracy and better club head feel.

Now it is easy and affordable to fine tune every golf club in your bag. There are 8 TLP weights to choose from; 8 gm, 12 gm, 20 gm, 40 gm, 60 gm, 80 gm and 100 gm. Each weight is interchangeable and simple to install, which makes it easy to find the optimal weight for every club in the bag; from putter to driver.

Tour Lock Pro’s Patent Pending Innercore Clamping and End Cap Technology securely holds Tour Lock Pro weights in place with no chance of loosening or rattling.

The weight raises the balance point of the club increasing overall feel, while at the same time, dampening unwanted vibration, producing a better feel and a solid, sturdier club.

Tour Lock Pro conforms to U.S.G.A. and R & A Rules of Golf.

Tour Lock Pro Weights is rated 4.2 out of 5 by 5.
Rated 3 out of 5 by from NOT RECOMMENDED FOR GRAPHITE The inside diameter of graphite shafts is smaller than steel shafts. It was a tight squeeze for the modifier tool. After cutting through the grip I had to cut out the grip tape in order to get the tool inside the shaft. The cutter loosened some of the graphite fibers in one of the two shafts because of the tight fit. The wall thickness of graphite shafts is thick enough that the flange diameter could be reduced and the weight could be installed before the grip. I didn't think the cutter that made the recess worked that well either.
Date published: 2013-05-10
Rated 5 out of 5 by from GREAT PRODUCT I have these weights in my driver and my putter and I will not play without them anymore. The shot dispersion with the driver is so much tighter I can pick a target and just let her rip. It might fade or draw a little by it will not be far off the target line. With the right weighting the putter feels much more stable through impact.
Date published: 2013-11-04
Rated 3 out of 5 by from Great idea with one flaw I have purchased 20 different weights and am currently unable to use 7 of them. The rubber expanded is not durable, it separates from the nut after a few removals and reuses. The end of the screw threads are notched to keep it from coming off but also makes it hard to replace. MFG needs to offer replacement expander
Date published: 2016-04-29
Rated 5 out of 5 by from review I have my clubs 1 inch above standard. Because of this my swingweight was over D5. I needed the extra weight in the butt end. easy to install, as a matter of fact it takes all of 5 minutes. I just bought some more weights to finish out my set. Would highly recommend.
Date published: 2009-09-10
Rated 5 out of 5 by from Tour Lock Weights These weights are great. We use these for back weighting wedges, putters and drivers. This provides a great feel to putters and wedges for a better release and distance controll. This is a great product.
Date published: 2009-09-06
  • 2016-07-27T07:51CST
  • bvseo_cps, prod_bvrr, vn_cps_3.3.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_5
  • loc_en_US, sid_TL0001, PRD, sort_relevancy
  • clientName_golfworks

Can these Tour Lock be inserted into shaft for counterbalancing putters before the grips are installed? Will they lock tight and not rattle after use>

Asked by: jim
Yes you could use the Tour Lock under the grip. You would install the Tour Lock weight and lock it in place and then install your grip and it will be fine. The also have the new Tour Lock Pro Counter Plugs (TLCP) which are designed to be installed under a grip and they say they will fit all steel shafts and most graphite shafts. These have a thinner top then the Tour Lock Pro weights and do not have the locking screw. http://www.golfworks.com/tour-lock-pro-counter-plugs/p/TLCP8/
Answered by: JimY
Date published: 2016-06-22

Do I have to change grips to use a weight

Asked by: bill
No you do not have to change the grip to use the Tour Lock weights. You use the Grip Modifier (TL0009) to drill a hole in the butt end of the grip and the weights are installed through the hole and locked in place at the top edge of the grip. There is a video on how these are installed at this link. https://www.tourlockgolf.com/tourlock-pro-installation/ Grip Modifier at this link. http://www.golfworks.com/tour-lock-pro-weights/p/TL0001/
Answered by: JimY
Date published: 2016-06-21

I am 68 yrs old what would you recommend in weight 8oz extra

Asked by: Drgolf
The TL0001 weights 8 grams which would lighten the swingweight of your club by 2 swingweights. Using a counter balance is so much a personal preference it is hard to make a recommendation. The weights in the 20 to 50 gram range seem to be the ones we sell the most of. A reference point is that a 4 gram increase of weight at the butt end will lighten the club by 1 swingweight.
Answered by: JimY
Date published: 2016-05-27

Can you recommend the parameters to use to determine the ideal Tour Lock Pro Weight for a blade putter?

Asked by: Pancho
Quite frankly it is an experiment to find out for sure which one might work for you. How heavy is the putter head that you are using? What type of swingweight would you like to have? If you want a swingweight in the D2 range with your putter you would measure the swingweight with the grip you are using and figure that 4 grams of weight added to the butt end will lighten the club by 1 swingweight. You could use that parameter to help find a starting point. If you look at the Super Stroke Counter Core (ST0055) putter grips they come with a 50 gram weight. That seems to be a popular weight for todays heavier putter head weights.
Answered by: JimY
Date published: 2016-05-23

Hi Jim, thanks for your response to my question about my 50* wedge. i have an 8g tour lock weight. would you recommend adding a 12 or 16g optivibe or just replacing it with a 20 or 30g tour lock? thanks!

Asked by: mjr
I too have experimented with the back weighting and if i were you i would just go with the new tour lock at the 20 - 30g
Answered by: Brent Dill
Date published: 2016-05-06

i have a 50* wedge that is about a D9 swing weight, i'd like to bring it down to D4, what weight would i have to add to achieve that. thanks

Asked by: mjr
It takes 4 gram increase of weight at the butt end to change the club 1 swingweight. So to lighten the club by 5 swingweights you need to add 20 grams of weight to the butt end. You may need just a little more then 20 because of the length of these weights and where some of the weight ends up in relationship to the balance point on the swingweight scale.
Answered by: JimY
Date published: 2016-05-05

Is there a place where a person can look up the recommend weights for various swing speeds ? 

Asked by: Eagle1947
Yes, there is a chart of recommended weights for "club classes" on the product selection page of the Tour Lock Golf web site (https://www.tourlockgolf.com/product-selection/) While it only refers to high or low swing speed and high or low handicap, it should be remembered that these items vary by the individual's preference. It will give you a good starting point, and in my own experience I did't vary from the med swing speed, low handicap recommendations. (98-102 mph, 2 hcp). I didn't use it for the putter- but I use a SuperStroke 1" pistol with a 50g counterweight- Tour Lock recommended 60g, so it's still not far off. There are also a couple of useful vids on their site.
Answered by: DMacNotGMac
Date published: 2016-04-10

Are these weights ok to use on graphite shafts?

Asked by: MRV44
Yes the Tour Lock Pro weights can be used with graphite shafts.
Answered by: JimY
Date published: 2016-01-13
  • 2016-07-27T07:54CST
  • bvseo_cps, prod_bvqa, vn_cps_3.3.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_25
  • loc_en_US, sid_TL0001, PRD, sort_recentAnswersFirst
  • clientName_golfworks