Callaway .335" Shaft Adaptor

Callaway .335" Shaft Adaptor


Callaway .335" - Shaft Adaptor
$2.99
Backordered

Callaway .335" Shaft Adaptor

Adaptor for reshafting Callaway FT-5, FT-I, X-460, Big Bertha 460, Big Bertha 454, VFT, ERC II, Steel Head III and Great Big Bertha II Woods. For .335" Shaft Tip Diameters.
Callaway .335" Shaft Adaptor is rated 5.0 out of 5 by 2.
Rated 5 out of 5 by from Met expectations I got two shaft adapters. They were for a .335 shaft mine were .350. I drilled them out and they worked great. I will know better next time and get .350 but hey these worked fine.
Date published: 2016-04-15
Rated 5 out of 5 by from Adapter allowed me to use a 350 tip shaft Older Callaway woods take 335 tip shafts, ever harder to find. This opens other outcomes.
Date published: 2017-03-22
  • y_2017, m_5, d_19, h_24
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_2
  • loc_en_US, sid_BB9002, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

Will this work on a X 460 driver?

Asked by: ryanb
Yes the BB9002 adaptor will work with the Callaway X460 driver.
Answered by: JimY
Date published: 2017-05-10

I have a Callaway Epic Nano Fuse shaft and a I-Mix FTiz 10deg. Driver head...Can't find an Adapter to go on my broken shaft... Can it be removed from the broken shaft and re-inserted into a new one? Thanks...

Asked by: Jim R
It should be possible to remove the adaptor and install onto another shaft.
Answered by: GW2002
Date published: 2017-04-21

Will this fit on Callaway iq tour driver? Thank you.

Asked by: Coltie2
Yes this will fit the Callaway IQ adaptor.
Answered by: JimY
Date published: 2017-03-27

Which adaptor do i need to fit g b b fusion r h I want to try a graffalloy pro launch 65 regular shaft.

Asked by: likka
If you have the older Callaway Big Bertha Fusion driver then you will need the BB9002 adaptor to install the ProLaunch Blue 65 shaft. If you have the newer Big Bertha Fusion they you would need the CA0020 shaft adaptor to be able to install this shaft.
Answered by: JimY
Date published: 2017-01-27

Will this work with a FT-3 Tour head with a .335 tipped shaft?

Asked by: john
Yes the BB9002 is the adapter needed to install a .335" tip diameter shaft into the FT-3 Tour driver.
Answered by: JimY
Date published: 2016-10-10

I have a .335 tip shaft I want to instal into a FT9 driver  I know the FT9 is a .350 tip  Which adaptor do I need to make it work? Not plastic I've tried that and they fall apart  Thanks 

Asked by: Golferwill
The BB9002 adaptor is the adaptor that you need for installing a .335" shaft into this driver. This is a plastic adaptor that we get from Callaway. I have installed many of these without a problem. I even play older Callaway fairway woods and have this adaptor in all of them with no problems. I always install this adaptor into the clubhead first then put epoxy on the shaft tip and install the shaft into the adaptor. There is not metal adaptor like this available for this installation.
Answered by: JimY
Date published: 2016-08-09

Looking for Callaway FT Fusion Driver Shaft Adapter

Asked by: Don
If you have the FT 3 Fusion driver the BB9002 is the adaptor you need for installing a .335" tip diameter shaft and the CSS would be the adaptor you would need to install a .350" tip diameter shaft.
Answered by: JimY
Date published: 2016-07-28

Do I need a shaft adaptor to reshaft an old Callaway X-Hot Three wood?  If so, which one?  Thank-you.

Asked by: gm44
With the X Hot 3 wood you just need a regular ferrule like the 60PW or a Collared ferrule like the BB0005. http://www.golfworks.com/golf-club-wood-ferrules-black/p/60PW/ http://www.golfworks.com/collared-golf-club-ferrules/p/BB0001/
Answered by: JimY
Date published: 2016-05-02
  • y_2017, m_5, d_19, h_5CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_13
  • loc_en_US, sid_BB9002, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks