The Graphite Design G-Tech is a good shaft and could work well with the Slider C driver and 5 wood. It is a little heavier shaft then the stock shaft used by Taylor Made in these clubs. They listed the Slider 57 as the stock shaft for the driver and Slider 67 as the stock shaft for the fairway woods. The number represents the shaft weight. The standard Taylor Made Slider driver used a .350" tip size shaft. I do not have any information as to what tip size shafts Taylor Made used in the Slider C driver and fairway woods. You may have to shim a .335" tip size shaft to properly fit these heads. You could use either the Universal Plastic Shim (BB9018) or the SHIM15 (.335" - .370") to shim these shafts if needed.
Date published: 2018-01-02