The GolfWorks Maximum Strength Quick Set Epoxy

The GolfWorks Maximum Strength Quick Set Epoxy

Max Strength Quick Set Epoxy 50 ml. Cartridge
In Stock
Max Strength Quick Set Epoxy 8oz. (2 4oz bottles) -
In Stock
Max Strength Quick Set - 200ml Cartridge -

The GolfWorks Maximum Strength Quick Set Epoxy

Recommended By The GolfWorks Staff!

The GolfWorks Maximum Strength Quick Set Epoxy is the strongest “5 minute” epoxy available, specifically formulated for metal wood and iron club assembly. Standard “5 minute” epoxies are only recommended for putter assembly and temporary emergency repairs. With a full cure lap shear strength of 2900 psi and a usable cure time of 15-30 minutes, the Maximum Strength Quick Set Epoxy eliminates the need for unreliable one part cyanoacrylate adhesives and is much more reliable than standard “5 minute” shafting epoxies with average lap shear strengths of 1500 psi. Maximum Strength Quick Set is black in color with a mix ratio of 1:1. Thumb plunger for dispersion is included.

Available in 50ml cartridges, 4 oz (2) bottles and 200ml cartridges. Note the 200ml cartridges require VB1028 Epoxy Gun

The GolfWorks Maximum Strength Quick Set Epoxy is rated 4.2 out of 5 by 5.
Rated 5 out of 5 by from Great For Adjustable Hosel Clubs I've gone through 3 tubes of this over the past 3 years and have not had 1 single failure. I use this specifically for all my TaylorMade Loft Sleeve Shafts adapters. For Drivers/Fairways/Hybrids with Graphite I use Quick Set 2900psi For Iron/Wedge steel shaft builds I go with the High Impact 4500psi Both Golfworks Products are fantastic!!
Date published: 2015-08-07
Rated 1 out of 5 by from Failure inevitable Once again this epoxy has failed. The shaft and adapter where prepared by the book. I gave this epoxy 24 hours to cure in a 70 degree room. The shaft completely spun out of the adapter with the first ball hit the same thing happened last year same product same adapter. Do not buy this product it is total garbage.
Date published: 2016-06-10
Rated 5 out of 5 by from Works fast I bought this to experiment with different shafts, easy to use, cures quick and strong.
Date published: 2016-09-15
Rated 5 out of 5 by from Great stuff Great service and fast response, love the quick set epoxy
Date published: 2016-08-07
Rated 5 out of 5 by from Works Great! This is a great epoxy for attaching hosel adapters.
Date published: 2016-04-25
  • y_2017, m_3, d_29, h_5
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_5
  • loc_en_US, sid_VB1003, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

I purchased this to repair a wedge and the plunger broke in my hand.  How much force do you need to make this work?

Asked by: DWY
If the epoxy is kept at room temperature, the force needed to dispense the epoxy should not be enough to break the the plunger. If the epoxy had been in a cooler or cold environment, it would be more difficult to use the plunger. It really is meant to be dispensed at a normal room temperature, approximately 72 degrees.
Answered by: GW2002
Date published: 2016-03-18

What is the safety information for this product. (For both exposure: MSDS, and disposal: Hazardous Waste designation)?

Asked by: Saftey Commisioner
Email this question to our Customer Service department at and they will email the SDS (Safety Data Sheets) as they are now called, for this product.
Answered by: JimY
Date published: 2016-03-09

Does this epoxy use a 1 to 1 mix  and  plunger?

Asked by: Toyman
No this uses the 2:1 plunger. All the Maximum Strength Epoxies use the 2:1 plunger.
Answered by: JimY
Date published: 2017-02-01

I need a quick drying epoxy but it needs to be clear in color? Do u guys sell any?

Asked by: Narv
  • y_2017, m_3, d_28, h_14CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_4
  • loc_en_US, sid_VB1003, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks