True Temper Straight Taper Steel Putter Shafts

True Temper Straight Taper Steel Putter Shafts


YST - .355" Stepless Straight Taper - 38in
$12.99
In Stock
TT0004P - .382" ID Flare-Tipped - 38in
$14.99
In Stock
TT0001P - .370" Stepless Putter - 38in
$12.99
In Stock
TT1008P - .370" Straight-Tip Stepped - 35in
$10.99
In Stock
TT1009P - .370" ID Controlled Straight-Tipped Stepless - 38in
$12.99
In Stock
Pureing 
1-3 $19.50
4+ $17.50
Tip & Butt Trimming
$4.95
Tip Prepping
$2.95

True Temper Straight Taper Steel Putter Shafts

  • YST - Stepless .355" straight tapered putter shaft
  • TT0004P - Flared tip .382 ID stepless steel putter shaft for over the post hosels
  • TT0001P - Stepless steel .370" putter shaft
  • TT1008P - Stepped .370" steel putter shaft
  • TT1009P - ID controlled .370" stepless straight taper steel putter shaft

True Temper Straight Taper Steel Putter Shafts is rated 4.8 out of 5 by 6.
Rated 5 out of 5 by from Great Service and Quick Response Golf Works has most everything in stock and provides the best service for Clubmakers. I will be ordering the majority of things I need frim them.
Date published: 2016-03-02
Rated 4 out of 5 by from Question on old Scotty Futura Phantom center shaft What shaft would you recommend for a Scotty Cameron Futura Phantom Mallet 2 (center shafted)? Just got done refinishing it, but need a new shaft.
Date published: 2016-10-11
Rated 5 out of 5 by from Can't go wrong Really good shaft. Straight taper looks sharp. Had it cut by the folks at Golf Works and it was perfect.
Date published: 2016-06-21
Rated 5 out of 5 by from Straight as can be... Looking for straight putts, so I bought a straight shaft.....my customer still curves his putts?
Date published: 2016-10-10
Rated 5 out of 5 by from Great Shaft This shaft replaced the Scotty shaft perfectly, absolutely perfect.
Date published: 2016-04-28
Rated 5 out of 5 by from rebuild Great replacement for original shaft for putter. East to jnstall
Date published: 2016-08-26
  • y_2017, m_2, d_20, h_15
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_6
  • loc_en_US, sid_YST, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

I have a custom made Edel plumberneck blade putter. Which shaft would I need to order?

Asked by: GOLO2875
I sent an email to Edel to see what tip size putter shaft they use in their plumbers neck putters. They came back and asked me which model plumbers neck? So they must use different tip size shafts for their different putters. I will need to know specifically which model you have. You can email that information to me at jyachinich@golfworks.com.
Answered by: JimY
Date published: 2017-02-06

What shaft is best for Bettenardi Inovai 3.0 putter?

Asked by: Semz
We do not have a stock shaft to fit this Bettinardi Inovai 3.0 putter. It does use a .370" tip size double bend putter shaft but the post that the shaft installs over is not at 90 degrees. Our double bend shafts are all for 90 degree bores or posts. The Odyssey TT204102 double bend shafts is for a non 90 degree post or bore but I do not know if it would work correctly with this putter. We could do a custom bend shaft for this putter but we do require you to send in the putter head so that we can be sure to get the bends set up correctly. http://www.golfworks.com/images/art/RepairForm.pdf Another option would be to send it back to Bettinardi for reshafting. https://bettinardi.com/
Answered by: JimY
Date published: 2017-02-07

have oddessy dual force 882 what shaft do i need

Asked by: mark
The Dual Force 882 putter will use the TT1009P putter shaft. This shaft is designed to work with the over the post shaft installation.
Answered by: JimY
Date published: 2017-01-31

Hi I have a Scotty Cameron studio stainless newport 2.5 that needs a shaft. Its a fit over model, flared. Can you tell me which shaft to order?

Asked by: chipkelly
You need the TT0004P Flare Tip putter shaft for the Cameron Studio Stainless Newport 2.5 putter.
Answered by: JimY
Date published: 2017-01-30

What is the replacement shaft for Ping Anser 4 milled (over hosel)

Asked by: Bryant2002
The Anser 4 Milled uses the Flare Tip putter shaft TT0004P.
Answered by: JimY
Date published: 2017-01-24

hello i live in tahiti and my shaft is dead. i have a scotty cameron california. which shaft i have to order on your site ? thank you

Asked by: teiki
For the Cameron California putter you need the YST putter shaft.
Answered by: JimY
Date published: 2017-01-24

I have an odyssey metal x milled #1 and looking for what fits the hosel

Asked by: Loudog
Odyssey uses .370" tip diameter putter shafts. You could use the TT0001P (Stepless) or TT1008P (Stepped) in the True Temper line.
Answered by: JimY
Date published: 2017-01-23

The flare tip is listed as 38" in the initial individual selections, and 37" in the specifications lower on the page. What is the overall length? I would like to convert a Wilson Staff Infinite Michigan Avenue to a 38" shaft w/ counter balance grip.

Asked by: cjmckay
The Flare Tip shaft is 37" long. You will not have any trouble getting 38" finished length with this shaft for this putter.
Answered by: JimY
Date published: 2017-01-23
  • y_2017, m_2, d_19, h_23CST
  • bvseo_bulk, prod_bvqa, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_88
  • loc_en_US, sid_YST, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks