Value Line Golf Club Bending Machine

Value Line Golf Club Bending Machine


Value Line Golf Club Machine
$149.99
In Stock
Putter Leveling Block
$29.99
In Stock
Brass Hosel Protectors - Pair
$1.99
In Stock

Value Line Golf Club Bending Machine

Our Value Line Golf Club Machine bends the loft and lie angles of irons and putters. It offers many of the features of the Maltby Design® Golf Club Machine at a lower price.

  • Bending bar included
  • Optional Brass Hosel Protector aids in protecting from marring (BHP)
  • Putter Leveling Block included
  • Vise mounted (Vise not included)

    Please Note: Additional shipping charges may be required due to weight.
  • Value Line Golf Club Bending Machine is rated 4.6 out of 5 by 12.
    Rated 5 out of 5 by from Good Personal Use Option Just finished going through two forged iron sets and a few putters and got the job done. I use a seperate gauge set so this setup requires a fair amount of going back and forth and patience. If you are not a handyman type of person, this could be very frustrating. But once you get the hang of it and get a feel for the bending process, it will get you where you want to go. Well built and I use it in a large vise on a tool stand I modified for this. Still can move around in the vise but I deal with it. Would not recommend for higher use situations.
    Date published: 2016-10-10
    Rated 5 out of 5 by from GREAT HOME CLUB TOOL! I ordered this for my own home use and it has worked really well for me. It is robust(I tore a 27-4 stainless 7 iron hosel with no damage to it) If you secure the club properly you will not damage this machine in normal use. The gauges are accurate and easy to read. I mounted it to a heavy wooden bench but it would be better to have the stand.
    Date published: 2012-06-05
    Rated 5 out of 5 by from Awsome Tool As advertised, installed new TT Lite shafts and changed lengths. When I checked the lies, they were all off by different amounts. This bending machine got them all perfect. Took a few minutes to get it going. Make sure it's secure on a non movable table and FOLLOW directions. Hitting them straighter and loving it. Thanks.
    Date published: 2016-11-10
    Rated 5 out of 5 by from It's worth the money I gave this product 5 stars because it's a solid tool that allows you to bend irons. It's a good buy for someone who wants to adjust lie or loft of his own irons, or a friend's, and is patient. There is no device with this machine that gives you your starting point(s) for loft or lie, so you need a way to measure the club before you bend it. I didn't care how many degrees I was flat or upright; I just wanted to bend the irons to meet a more comfortable stance. Later I bought Golfworks' protector just to see where things were, which turned out useful because several irons I thought I'd bent had not, in reality, been changed at all. The machine secures the iron well, and the rod that comes with it is fine for bending the hosel. But-- YOU WILL WANT TO USE THE BRASS SLEEVES THAT ARE SOLD SEPARATELY, unless having marks on your hosels doesn't matter to you (it doesn't to me). For putters, follow the instructions to the letter to protect the top edge from being dented. Also, use those brass sleeves.
    Date published: 2015-12-26
    Rated 4 out of 5 by from Love it so far I've used it for about a month now. I've only used it to bend my ridiculous number of blade style putters. I bought the vice version and it's worked great for me so far.
    Date published: 2015-09-24
    Rated 3 out of 5 by from VALUE LINE GOLF CLUB MACHINE I don't know how to check the loft and lie angles after bending,I did not see any measure instrument on this VALUE LINE GOLF CLUB MACHINE
    Date published: 2008-07-18
    Rated 5 out of 5 by from Bending machine Great for the price. This machine already included the tool bar. Didn't know so I ordered one but when I got it, it had two inside the order.
    Date published: 2016-07-19
    Rated 4 out of 5 by from Economy Bending Solution If you're a do it yourselfer like me and want to be able to tweak your irons without investing in an expensive loft and lie machine that permanently occupies precious shop space this iron-clamp/vice may be the solution. The construction is heavy duty. However you do need a firmly anchored shop vice and the concerns (stated elsewhere) that it may slip out when bending loft are warranted. I solved that concern by drilling and tapping for socket head caps screws (on the vice clamp tab) that would have catch on the jaws of the vice and shear off before the unit could come loose. Another concern I had was being able to accurately measure hosel changes during the bending process. I use a cheap magnetic digital angle finder attached to the (steel) shaft just above the hosel (this wouldn't work on graphite shafts). For lie angle adjustments of low lofted irons the angle-finder read out is almost 1:1 but as the loft of the iron increases the required tweak must be calculated (the trigonometry is simple to deduce). Of course the final loft/lie measurements are made with the iron out of the device. Overall I'm quite happy with the purchase and my newly bent irons.
    Date published: 2015-08-08
    • y_2017, m_2, d_19, h_13
    • bvseo_bulk, prod_bvrr, vn_bulk_0.0
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_12
    • loc_en_US, sid_VAM, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
    • clientName_golfworks

    Is the Value Line Golf Club Bending Machine (price 149.99 USD) coming already with the Bending Bar and Putter Leveling Block? Or do I need to buy them separately?

    Asked by: Guat
    Yes the Value Line Golf Club Bending Machine does come with the Bending Bar and the Putter Leveling Block. You do not need to purchase them separately.
    Answered by: JimY
    Date published: 2017-02-08

    Are left handed clubs supported?

    Asked by: Golfrocks
    Yes the VAM works for both right and left hand clubs.
    Answered by: JimY
    Date published: 2017-02-06

    Does it come with a bending bar?

    Asked by: Archie
    Yes a bending bar is included. It comes with the GW1036 Short Hosel bending bar.
    Answered by: JimY
    Date published: 2017-01-30

    will this work for bending mallet putters

    Asked by: tyler23
    Yes it will work for bending Mallet putters. It does work better for bending lie angle because of the way it clamps and holds the heads. It may not hold some mallet designs for bending loft as well because of the clamping system.
    Answered by: JimY
    Date published: 2017-01-30

    whatsetupcanyougettogetcorrectloftandlie

    Asked by: splashbud13
    You would use a gauge like the Value Line Golf Club Gauge (HGCG) or the GolfWorks Golf Club Gauge (GW1040) to correctly read the loft and lie specifications. http://www.golfworks.com/value-line-golf-club-measuring-gauge/p/HGCG/ http://www.golfworks.com/maltby-precision-milled-golf-club-machine/p/MA2024/
    Answered by: JimY
    Date published: 2017-01-19

    How long are these on backorder for?

    Asked by: Gobrown44
    You would be best to check with GolfWorks Canada to see when they expect to have these in stock. http://www.golfworks.ca/contact-us/a/222/
    Answered by: JimY
    Date published: 2017-01-09

    would a blade putter also fit into this bender? And will all irons fit in machine?

    Asked by: Doug
    Yes blade putters will fit into the VAM bending machine.
    Answered by: JimY
    Date published: 2017-01-03

    Can the short hosel bending bar be exchanged for a long hosel bar in this package? If so, how much and how to order?

    Asked by: blipnitz
    You will need to contact Customer Service with this question. You can contact them at 1-800-848-8358 or by email at golfworks@golfworks.com.
    Answered by: JimY
    Date published: 2016-12-12
    • y_2017, m_2, d_19, h_24CST
    • bvseo_bulk, prod_bvqa, vn_bulk_0.0
    • cp_1, bvpage1
    • co_hasquestionsanswers, tq_47
    • loc_en_US, sid_VAM, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_golfworks