Economy Iron Bending Machine

Economy Iron Bending Machine


Economy Iron Bending Machine
$339.99
In Stock

Economy Iron Bending Machine

The Economy Bending Machine allows the clubmaker to easily bend and measure the loft and lie of an iron without having to remove the club head from the clamp. The sliding Protractor Assembly measures both right and left hand irons. Bench mount design does not require an expensive bending machine stand.

  • Sliding Protractor Assembly measures right or left handed clubs for loft and lie.
  • Brass Soling Discs securely clamps most iron heads.
  • Brass Toe Stop helps prevent slippage during bending.
  • Bench mounted. Does not require a stand.
  • Bending Bar Included (GW1036 Short Hosel Bending Bar)
  • Complete instructions included.,
Please Note: Additional shipping charges required due to weight.
Economy Iron Bending Machine is rated 3.8 out of 5 by 8.
Rated 4 out of 5 by from A good product The economy Iron Bending Machine is a good product. But I did not need to mount it to the floor. I bolted it to a heavy piece of steel angle and clamp that in a vise fixed to a solid bench. That puts everything in perfect position. I made one other change that makes it extremely easy to use. I had a helmet-mount bicycle mirror sitting around. Once stuck to the side of the angled part of the frame with double-stick foam tape, I was able to adjust it to allow me to see the alignment of grooves without moving from the back of the tool. This greatly simplifies the process and should be included in every unit sold.
Date published: 2015-12-05
Rated 3 out of 5 by from Easy to assemble All in all a good enough product for my purposes. However the 'lie' gauge is 1 degree off to the upright direction. No biggie. The knob to tighten the clamp to the back face of the unit, the thread stripped after 2 clubs were adjusted. Ended up fitting a 3/8" nut and washer.
Date published: 2015-06-03
Rated 4 out of 5 by from Gets the job done. Bought it a month ago. Set loft/lie on AP2's. Worked great. Buy upgraded bending bar. Leaves mark on forged hosel without brass inserts.
Date published: 2017-03-01
Rated 1 out of 5 by from I Bought this a months ago The knob to tighten the clamp to the back face of the unit, the thread stripped after 2 clubs were adjusted.
Date published: 2017-04-05
Rated 4 out of 5 by from Great for the do it yourselfer. Every golfer needs this. I’m 5’8” and have never hit the ball straighter since dropping my lie angle 6 degrees on my titleist mb’s. Set up is a little tough due to making a stand. Connected 2” angle iron an then clamped to a vise. Good enough quality for the do it yourselfer but would go with a higher quality tool if you want to make any money with it.
Date published: 2017-12-02
Rated 5 out of 5 by from Small Adjustments This bender is just what I wanted. I only intended to make minor ajustments to some of my clubs. It is perfect for that. I made Avery heavy duty stand that has holes for my bench vice, putter bender, grip station and now irons and hybrid bender. GolfWorks Products have not failed me yet, been very happy. Thanks
Date published: 2017-06-05
Rated 5 out of 5 by from Worth the investment! Purchased after thinking something was of in my irons. I had to build a stand which was easy, then checked the L & L. 2 clubs were over 4 degrees off. Great for the tinkerer.
Date published: 2016-11-28
Rated 4 out of 5 by from Good machine Good little machine for tinkering around glad I bought it found my wedges were off 3 degrees
Date published: 2017-10-25
  • y_2018, m_1, d_20, h_10
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.6
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_8
  • loc_en_US, sid_GW0053, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

I read the instructions for assembling this machine, but it did not cover how to set up and use for left handed irons.

Asked by: Wil
The only adjustment that needs to be made is to move the toe stop to the other side. The dual protractor is in place already for the left hand clubs.
Answered by: GW2002
Date published: 2018-01-12

I noticed you sent a someone a bolt pattern pic for this, can I get the same please? I have an older golfsmith stand and I want to know if it will work with this.

Asked by: Jhahn34
I have sent you an email with the drawing for the bolt pattern for the GW0053.
Answered by: JimY
Date published: 2017-12-06

What is the weight of the unit?

Asked by: Peetie
The Economy Iron Bending Machine itself weights 17 lbs.
Answered by: JimY
Date published: 2017-10-10

Hi what are the dimensions of the bending machine?

Asked by: Sweeper
The base is 3" wide and 6" long. The machine is 10.5" tall, 12.5" long at the top for the measuring device and 11.5" across the measuring device.
Answered by: JimY
Date published: 2017-10-10

Can I get a updated price if I don't require the bending bar? How much for the machine alone?

Asked by: jdhahn34
You will need to call Customer Service at 1-800-848-8358 and they can help you with this information.
Answered by: JimY
Date published: 2017-08-28

Is there a vice mount for this product?

Asked by: Joe
No, there is no vice mount option for the loft and lie bending machine. We do have a Bench Top Stand for this machine (GW0102). https://www.golfworks.com/the-golfworks-bench-top-bending-machine-stand/p/GW0102/
Answered by: JimY
Date published: 2017-08-26

Can I substitute the non marring bending bar for the bar that comes with the Economy iron bending machine? What is the charge? What is the freight vharge to Florida?

Asked by: Phil
For substitutions questions like this you need to call Customer Service at 1-800-848-8358.
Answered by: JimY
Date published: 2017-08-07

Can this be easily attached to a vise or do you need to purchase the stand?

Asked by: frankb8740
You would have to create a way to be able to use secure the GW0053 in a vise. It will attach to the Bench Top Bending Machine Stand (GW0102). Our other floor stands would have to be modified by drilling new mounting holes to be able to mount the GW0053 bending machine.
Answered by: JimY
Date published: 2017-05-25
  • y_2018, m_1, d_20, h_10CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.6
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_31
  • loc_en_US, sid_GW0053, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks