Mitsubishi Rayon Diamana S+ Graphite Wood Shaft

Mitsubishi Rayon Diamana S+ Graphite Wood Shaft


62 R Flex - 46", .335" tip (64gm) 3B2S -
$99.00
In Stock
62 S Flex - 46", .335" tip (64gm) 4B1M -
$99.00
In Stock
62 X Flex - 46", .335" tip (67gm) 5B1M -
$99.00
In Stock
Pureing 
1-3 $19.50
4+ $17.50
Tip & Butt Trimming
$4.95
Tip Prepping
$2.95

Mitsubishi Rayon Diamana S+ Graphite Wood Shaft

The S+ Series (BLUE BOARD) profile will feature MRC's signature "smooth" bend profile offering "balanced" stiffness on both ends of the shaft with a slightly "stiffer" mid and butt-section than both the Original S-Series and Kai'li™ to deliver the enhanced feel of the Original S-Series profile and stability at impact of Kai'li™.

Trimming Instructions

Mitsubishi Rayon Diamana S+ Shaft Specifications

Not Found.

How does this shaft compare to the Fubuki Z 60 and Bassara G 53 S? Looking to build a custom Big Bertha Fusion driver, currently play an FT-5 with Fujikura ES-150 S.

Asked by: The Steel
The Diamana S+ S flex weights 64 grams, with 4.5 degrees torque and is designed to create a mid ball flight. The Fubuki Z 60 S flex weights 64 grams with 4.1 degrees torque and is designed to create a mid/low ball flight. The Bassara G 53 S flex weights 56 grams with 4.4 degrees torque and is designed to create a mid ball flight. The Bassara G 53 will likely play a little more flexible then a normal S flex. That is pretty typical for shafts in the 50 gram weight range.
Answered by: JimY
Date published: 2017-05-15

I have a Taylormade M1 would you be able to cut the shaft to 44.5" and put the Taylormade tip on?

Asked by: Chad
Yes, we can assemble the tip onto the shaft for you at any length. There is a $10 charge for this service. Just put your requested shaft & grip along with the TaylorMade M1 adaptor (TM0023) into the cart and at check out request assembly in the notes. Please be certain to note your request for the shaft to be cut to 44.5" playing length and any other instructions such as grip size and grip alignment.
Answered by: Admin
Date published: 2017-05-03

Available in Lite flex which is Diamana senior flex? I purchased a Lite Blueboard Lite 53x5ct shaft from Golf Works several years ago

Asked by: Jack
Original Diamana Blue board in a Lite flex is not available and out of production. WE do have the Tensei CK Blue first generation product in a 53 gram A flex (MR0068) that is a mid/high trajectory shaft and should play similar to the original Blue Board Lite flex. The price has also been reduced for this special offer product to $129.00. Was $199.99 last year.
Answered by: GW2002
Date published: 2017-04-28

Can it be adapted for a Ping G30 driver?

Asked by: Diane
Yes this could be installed into a Ping G30 driver. You would either need to purchase a new Ping Shaft Adaptor (PGC002) or reshaft the existing shaft adaptor. https://www.golfworks.com/ping-g30-series-shaft-adaptor/p/PGC002/
Answered by: JimY
Date published: 2017-04-26

Currently I have the Aldila VS Proto 60 R in a Cobra Bio + Driver (3b1m). I feel I need something with a little more height and a bit more kick at the bottom. So would this Diamana S+ shaft in Regular (3b2s) do that?

Asked by: getting old
The Diamana S+ is a good shaft and could work well. Another shaft I recommend quite often is the Graphite Design YS6+ (YS633WPL). It is another good shaft that could work well. https://www.golfworks.com/graphite-design-ys-6-graphite-wood-shaft/p/YS633WPL/
Answered by: JimY
Date published: 2017-04-01

what is the gram weight of the Mitsubishi Rayon Diamana S + Blue 70 shaft for a fairway 3 wood

Asked by: Chuck
Mitsubishi lists the S+ Blue 70 at 69 grams for the R flex, 71 grams for the S flex and 72 grams for the X flex. They do not make an aftermarket version of this shaft for a fairway wood.
Answered by: JimY
Date published: 2017-02-14

what is the cost to purchase this shaft with an head adaptor installed.

Asked by: marcus
That depends on which shaft adaptor you need. They are not all the same price. You would be best to contact Customer Service at 1-800-848-8358 or by email at golfworks@golfworks.com and they can give you all the costs.
Answered by: JimY
Date published: 2017-01-26

Would like to replace shaft in Ping I25 driver came with pwr65 tour spec. I have hit the S+ in TM2 and gave me a desired ball flight. Swing speed 100. Any suggestions?

Asked by: Mic
It you have hit the S+ and liked it that would be where I would start. At 100 mph that would put you into an S flex shaft. The Diamana S+ shaft is a very good shaft.
Answered by: JimY
Date published: 2017-01-23
  • y_2017, m_5, d_18, h_22CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_29
  • loc_en_US, sid_MR0034, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks